APC Network Switches

Symmetra PX 80kW Static Switch Module 400V

This is an 80 kilowatt Static Switch Module for the APC Symmetra PX UPS System. It is configurable for N+1 internal redundancy and provides high availabilty through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load (N+1).

Item #: 8990344

Mfr #: SYSW80KH

Category: APC Network Switches

Rack Automatic Transfer Switch, 12A, 230V

This is a high availability rack power transfer switch that has two input power cords, one for each AC line, which provide redundant power to equipment. The rack transfer switch is designed to supply power to a load from a primary AC source. If there is a problem with the primary source the switch will automatically begin using power from...

Item #: 5219378

Mfr #: SU043

Category: APC Network Switches

Rack Automatic Transfer Switch 1U Rackmount, 230V IEC-320 C14 Input, (12) IEC-320 C13 Outlets

This APC Rack Automatic Transfer Switch (rack ATS) provides reliable, redundant power to single-corded equipment. The rack ATS has dual input power cords supplying power to the connected load. If the primary power source becomes unavailable, the rack ATS will seamlessly source power from the secondary source without interrupting critical loads. Networked units have built-in network connectivity, which allows for...

Item #: 9009984

Mfr #: AP7721

Category: APC Network Switches

Open Box: APC Rack Automatic Transfer Switch, 12A, 230V

This is a high availability rack power transfer switch that has two input power cords, one for each AC line, which provide redundant power to equipment. The rack transfer switch is designed to supply power to a load from a primary AC source. If there is a problem with the primary source the switch will automatically begin using power from...

Item #: 9250954

Mfr #: SU043

Category: APC Network Switches

Rack Automatic Transfer Switch, 20A, 208V, (2)L6-20 in, (1)L6-20 out

APC's Rack Automatic Transfer Switch (ATS), also known as the Redundant Switch, is a high availability switch that has two input power cords, one for each AC line, which provide redundant power to connected equipment. The Rack ATS is designed to supply power to the connected load from a primary AC source. If that primary source becomes unavailable for whatever...

Item #: 463773

Mfr #: SU045-1

Category: APC Network Switches

24-Port 10/100 Standalone Ethernet Switch

This Ethernet switch improves adaptability by offering a pre-integrated solution designed for InfraStruXure architecture. It provides rapid data transmission in a 1U rackmount form factor and addresses the connectivity needs of network administrators. It is designed to eliminate congestion over the network. The switch can be used anywhere that networking equipment exists, including wiring closets, computer rooms and data centers...

Item #: 5896096

Mfr #: AP9224110

Category: APC Network Switches

Serial On/Off Switch

Allows you to turn off the power output of APC UPSs with a remote switch. Use with an Emergency Power-Off system for complete protection in emergencies.

Item #: 5212993

Mfr #: AP9214

Category: APC Network Switches

2-Port DB25 Switchbox 2x1 Manual (Metal Housing)

This 2-to-1 manual data switch has (2) DB25 female ports and is an economical solution for allowing two users to share a single printer. No dedicated power source is required for operation. Note: This unit is not recommended for use with laser printers.

Item #: 162050

Mfr #: 0694

Category: APC Network Switches