Adtran Multiplexers

19-inch Chassis for MX2820 M13 Multiplexer, SCU 24V 14 Mux.

This product is a chassis to a MX2820 High Density M13 Multiplexer.

Item #: 5333816

Mfr #: 4186010L14

Category: Adtran Multiplexers

Atlas 890 Redundant System

This is a redundant AC power system for the ATLAS 890.

Item #: 242324

Mfr #: 4200321L2

Category: Adtran Multiplexers

MX2820 - Multiplexor - rack-mountable - T-3

M13 deployment, the technology that enables multiple T1 delivery from a single T3, is a fairly elementary yet important art for telecommunications carriers. Demand for T1s is affected by existing Remote Terminals (RTs) that are space constrained. Supplying a carrier-class multiplexer that can significantly increase T1 output while minimizing space has been the challenge for telecommunications equipment providers. Carriers facing...

Item #: 6324145

Mfr #: 4186001L10

Category: Adtran Multiplexers

TA OPTI-3 Redundant Rackmount Chassis

The ADTRAN Total Access OPTI-3 sets a new mark for OC-3 multiplexers, delivering three DS3 circuits from a single OC-3 feed. Designed to meet the growing demand for DS3 deployment in today's economy, the Total Access OPTI-3 eliminates the need for expensive SONET multiplexer equipment in terminal mode applications and provides the fullest use of OC-3 capacity. The Total Access...

Item #: 464249

Mfr #: 4184003L3

Category: Adtran Multiplexers

Atlas 890 Non-Redundant System

The ATLAS 890 functions as a multi-T1 or T3 IAD, 3/1/0 DACS, ISDN switch, IP router, and Frame Relay concentrator/switch. It supports up to (64) T1/PTI ports, and has a maximum backplane bandwidth for TDM applications of 30 T1s through the chassis. Its switchboard supports circuit switching applications such as intelligent call routing , overbooking and least-cost routing based on...

Item #: 285817

Mfr #: 4200321L1

Category: Adtran Multiplexers

TA OPTI-3 Rackmount Chassis

Total Access OPTI-3 is the industry's first OC-3 multiplexer to deliver three DS3s in a compact package one-tenth the size of similar products and at a fraction of the price. The Total Access OPTI-3 can achieve a range of 40 km using two single mode fibers and 1310 nm wavelength optics. Its fully-integrated design provides the management and redundancy features...

Item #: 290683

Mfr #: 4184003L1

Category: Adtran Multiplexers

MX2820 19" Chassis, SCU, 6 MUX Card

The ADTRAN High-Density M13 Multiplexer offers bandwidth consolidation at a low price in a dense rackmount chassis.

Item #: 5872748

Mfr #: 4186001L6

Category: Adtran Multiplexers

Bundle MX2820 23inch Chassis, SCU, with 4 MUX Cards

In areas where multiple M13s are needed, the MX2820 frees up valuable rack space with a high-density chassis. The MX2820 houses up to 18 multiplexer cards to provide 9 redundant M13 multiplexers in 2 rack units of space. Up to 7 redundant M13 multiplexers can be based in a 19-inch chassis. In addition, the MX2820 can provide up to 63...

Item #: 5696027

Mfr #: 4186002L4

Category: Adtran Multiplexers

MX2820 19" Chassis, SCU, 4 MUX Card

This chassis is designed for the MX2820 Multiplexer. The MX2820 SCU manages multiplexers.

Item #: 5547700

Mfr #: 4186001L4

Category: Adtran Multiplexers

MX2800 AC/DC Redundant System Multiplexor

The MX2800 offers bandwidth consolidation at a low price and has a small footprint. Measuring only one rack unit high, this compact device gives NSPs and enterprise users a powerful tool for consolidating 28 T1 signals or 21 E1 signals into a T3 circuit.A fully connectorized backplane means no wire wrapping and quick easy installation. As with all ADTRAN products,...

Item #: 422585

Mfr #: 4205290L10#B

Category: Adtran Multiplexers

MX2800 Non-Redundant M13 Multiplexer AC

The MX2800 offers bandwidth consolidation at a low price and has a small footprint. Measuring only one rack unit high, this compact device gives NSPs and enterprise users a powerful tool for consolidating 28 T1 signals or 21 E1 signals into a T3 circuit. A fully connectorized backplane means no wire wrapping and quick easy installation. As with all ADTRAN...

Item #: 422594

Mfr #: 4205291L2

Category: Adtran Multiplexers

MX2820 23" Chassis, SCU, 2 MUX Card

This chassis is designed for the MX2820 Multiplexer. The MX2820 SCU manages multiplexers.

Item #: 5452073

Mfr #: 4186002L2

Category: Adtran Multiplexers

MX2800 Redundant M13 Multiplexer AC

The MX2800 offers bandwidth consolidation at a low price and a small footprint. Measuring only one rack unit high, this compact device gives NSPs and enterprise users a powerful tool for consolidating 28 T1 signals or 21 E1 signals into a T3 circuit. A fully connectorized backplane means no wire wrapping and quick easy installation. As with all ADTRAN products,...

Item #: 422587

Mfr #: 4205290L12

Category: Adtran Multiplexers

19-inch Chassis for MX2820 M13 Multiplexer, SCU 24 Volt, 2 Mux.

This chassis is designed for the MX2820 Multiplexer. The MX2820 SCU manages multiplexers.

Item #: 5333824

Mfr #: 4186010L2

Category: Adtran Multiplexers

MX2800 AC/DC Redundant System

The MX2800 offers bandwidth consolidation at a low price and in a small footprint. The equipment meets stringent NEBS Level 3 requirements. Measuring only one rack unit high in 19-inch or 23-inch rackmount configurations, this compact device gives NSPs and enterprise users a powerful tool for consolidating 28 T1 signals or 21 E1 signals into a T3 circuit. In addition,...

Item #: 422637

Mfr #: 4205290L9#B

Category: Adtran Multiplexers

MX2800 Redundant M13 Multiplexer DC

The MX2800 offers bandwidth consolidation at a low price and has a small footprint. Measuring only one rack unit high, this compact device gives NSPs and enterprise users a powerful tool for consolidating 28 T1 signals or 21 E1 signals into a T3 circuit. A fully connectorized backplane means no wire wrapping and quick easy installation. As with all ADTRAN...

Item #: 422589

Mfr #: 4205290L14

Category: Adtran Multiplexers

MX2800 Redundant M13 Multiplexer AC

The MX2800 offers comprehensive management options, including full management and GUI support from ADVISION. It features a VT100 terminal interface for local configuration. To support SNMP and Telnet management, the MX2800 has an integrated 10BaseT Ethernet port. Carriers looking to maximize their copper investment and consolidate their services in the most efficient manner will find the MX2800 will pay off...

Item #: 422595

Mfr #: 4205291L6

Category: Adtran Multiplexers

MX2800 Redundant M13 Multiplexer AC

The MX2800 offers bandwidth consolidation at a low price and has a small footprint. Measuring only one rack unit high, this compact device gives NSPs and enterprise users a powerful tool for consolidating 28 T1 signals or 21 E1 signals into a T3 circuit. A fully connectorized backplane means no wire wrapping and quick easy installation. As with all ADTRAN...

Item #: 422624

Mfr #: 4205290L2

Category: Adtran Multiplexers

Bundle MX2820 19inch Chassis, SCU, with 2 MUX Cards

In areas where multiple M13s are needed, the MX2820 frees up valuable rack space with a high-density chassis. The MX2820 houses up to 18 multiplexer cards to provide 9 redundant M13 multiplexers in 2 rack units of space. Up to 7 redundant M13 multiplexers can be based in a 19-inch chassis. In addition, the MX2820 can provide up to 63...

Item #: 5702298

Mfr #: 4186001L2

Category: Adtran Multiplexers

MX2800 Redundant M13 Multiplexer DC

The MX2800 offers bandwidth consolidation at a low price and in a small footprint. Measuring only one rack unit high, this compact device gives NSPs and enterprise users a powerful tool for consolidating 28 T1 signals or 21 E1 signals into a T3 circuit. A fully connectorized backplane means no wire wrapping and quick easy installation. As with all ADTRAN...

Item #: 422630

Mfr #: 4205290L4

Category: Adtran Multiplexers