Shelf Rack Mount Kit

19" Shelf Rack Mount Kit

Being a worldwide leader in network solutions, Digi International brings end users a complete range of network accessories. Digi's line of rack mount assemblies allows you to move your products from the desktop to your wiring closet's 19-inch rack.

Item #: 370474

Mfr #: 301-9001-01

Category: Shelf Rack Mount Kit

Universal Monitor Rack Mount Kit

The HP Universal Monitor Rackmount Kit is a universal kit, suitable for all HP monitors from 14-19 inches, that holds up to 100 lbs. Selected 19" monitors will also fit (max. height = 18.1"). The kit contains a mounting shelf, two decorative panels and mounting hardware.

Item #: 220213

Mfr #: J1519B

Category: Shelf Rack Mount Kit

Shelf Bracket Kit for MDS 9000 Series, Spare

This telco and EIA shelf bracket kit (DS-SHELF) can temporarily or permanently support the Cisco MDS 9500 Series during installation. After the front rack-mount brackets are securely attached to the rack-mounting rails, the shelf bracket can be removed. This kit supports the following configurations: a Cisco MDS 9506 Director in a two-post telco rack, a Cisco MDS 9506 Director in...

Item #: 8054855

Mfr #: DS-SHELF=

Category: Shelf Rack Mount Kit

Shelf Bracket Kit for MDS 9000 Series

This telco and EIA shelf bracket kit (DS-SHELF) can temporarily or permanently support the Cisco MDS 9500 Series during installation. After the front rack-mount brackets are securely attached to the rack-mounting rails, the shelf bracket can be removed. This kit supports the following configurations: a Cisco MDS 9506 Director in a two-post telco rack, a Cisco MDS 9506 Director in...

Item #: 8054847

Mfr #: DS-SHELF

Category: Shelf Rack Mount Kit

Seismic Shelf Mounting Collar Kit

This is a Nortel Seismic Shelf Mounting Collar Kit. It is used with the Mss 7400 Series.

Item #: 7280842

Mfr #: NTFN38AA

Category: Shelf Rack Mount Kit

Shelf Installation Kit

This Nortel Shelf Installation Kit is used with the Optical Metro 5000 series product family.

Item #: 7893294

Mfr #: NT0H44BAE6

Category: Shelf Rack Mount Kit

NetShelter, Rack Shelf Kit

This 19" shelf is intended for use with the NetShelter PNET4, PTELI-4 or P232-4. The kit has twenty lines and five modules, with front access for rackmountable applications (40 lines total).

Item #: 55139

Mfr #: PRM

Category: Shelf Rack Mount Kit

Seismic Kit for 2nd Shelf in Universal Frame

This is a Nortel Seismic kit for a 2nd Shelf in a universal frame. It is used with the Mss 7400 Series.

Item #: 7281482

Mfr #: P0879316

Category: Shelf Rack Mount Kit

19" Telecom Shelf Kit for GTX Series UPS

The RS500 19" rack shelf kit is designed to allow flush mounting of the UPS into 19" wide telecom and relay (single mounting rail) racks.

Item #: 6741213

Mfr #: RS500

Category: Shelf Rack Mount Kit

Shelf Installation Kit

This is a Nortel Shelf Installation Kit. It is used with the Optical Multiservice Edge 6500 Broadband product family.

Item #: 8277944

Mfr #: NTK509ZXE6

Category: Shelf Rack Mount Kit

RX1600 Rack Support Shelf Kit

This is a rack support shelf kit for the RX1600.

Item #: 9130661

Mfr #: AB469A

Category: Shelf Rack Mount Kit

Shelf Bracket Kit for MDS 9500

The Cisco MDS 9500 Shelf Bracket Kit (DS-SHELF-9500) can be used to support the Cisco MDS 9509 Director in a nonthreaded cabinet or rack with an 18-inch (45.7 cm) front to rear fixed rail spacing.Note Do not use this shelf bracket with the Cisco MDS 9513 Director or the Cisco MDS 9506 Director.

Item #: 8054863

Mfr #: DS-SHELF-9500

Category: Shelf Rack Mount Kit

Equipment Shelf Universal Shelves - Rack Mountable For 2-4 Post Rack 19 inch

The 1USHL-108 rack mount system allows desktop and tower computers, tape backups, and other equipment to be mounted in 19" racks. This low cost fixed tray design combines a space saving mounting tray with universal rack compatibility. This kit will mount in all 19" 2Post and 4Post racks up to 30" deep. The kit contains a tray, rack mount brackets,...

Item #: 450389

Mfr #: 1USHL-108

Category: Shelf Rack Mount Kit

Rackmount Shelf Kit for CPS800 or CPS1600 - 1U

This 1U' rack mount shelf is for use with CPS800 or CPS1600.

Item #: 301512

Mfr #: 790200

Category: Shelf Rack Mount Kit

Rackmount Kit for StorageWorks 700ux, 1100ux

This shelf allows you to mount your StorageWorks Optical Jukebox 700ux or 1100ux on a rack.

Item #: 6056769

Mfr #: AD505A

Category: Shelf Rack Mount Kit

HP SmartBuy MSA 1510i Controller Bundle

The HP StorageWorks SmartBuy MSA 1510i Bundle is a configuration starter kit based on the iSCSI-based 2U controller shelf that connects to both enterprise-class SCSI and Serial ATA (SATA) disk enclosures. Simplicity without compromise . Change without chaos . Increased scalability w/SCSI drives . Low cost, higher capacity with SATA drives . Modular 2U rack-mount disk array controller.

Item #: 6948097

Mfr #: AG501A

Category: Shelf Rack Mount Kit