Shelf Rack

19" Shelf Rack Mount Kit

Being a worldwide leader in network solutions, Digi International brings end users a complete range of network accessories. Digi's line of rack mount assemblies allows you to move your products from the desktop to your wiring closet's 19-inch rack.

Item #: 370474

Mfr #: 301-9001-01

Category: Shelf Rack

RAID Array 3000 Ultra SCSI Disk Shelf Rack Mounted

The RAID Array 3000 Ultra SCSI Rackmount disk shelf includes a blue Ultra Wide BA356 disk shelf, two 180-Watt power supplies, a single-ended Ultra Wide personality card, one half-meter SCSI cable (BN37A-0E), North American power cords and a RETMA mounting bracket (disks not included). It is an integral component of the Compaq StorageWorks RAID Array 3000 (RA3000-RM).

Item #: 178839

Mfr #: DS-SWXRA-GN

Category: Shelf Rack

Rack Shelf Cantilevered, 17in wide x 14in deep, black finish (MCCCS19)

This cantilever shelf is intended for use in Hubbell-Premise Wiring racks and is used for lighter equipment such as modems and hubs. It can also be reverse mounted (upside down) to create a work surface. It has a maximum load of 50 lbs. The usable area is 17"w x 14"d.

Item #: 143086

Mfr #: MCCCS19

Category: Shelf Rack

Networking and Seismic Cabinet Accessories, Telescopic Shelf (MCCTELSHLF)

This steel Telescopic Shelf assembles to 19 uprights in premise networking and seismic cabinets, providing a slide out surface for equipment where rear access is crucial. Its load capacity is 85 lbs.

Item #: 4787445

Mfr #: MCCTELSHLF

Category: Shelf Rack

Rack Shelf Center Weighted, 17in wide x 19in deep, black finish (MCCCWS19)

This center weighted cantilever shelf is intended for use in Hubbell-Premise Wiring racks and is ideal for servers, monitors, or other heavy equipment. The 50 lbs. load capacity is upgradable to 75 pounds with the optional brackets that are included in the box. The usable area is 17"w x 19"d.

Item #: 143087

Mfr #: MCCCWS19

Category: Shelf Rack

Stationary Shelf 1U

This is a 28.2" x 16.9" stationary shelf with a capacity of 200 pounds. for your premise networking cabinet. Its finish is Powder Black and it uses #12-24 screws. (Mounting screws and brackets are included.)

Item #: 434821

Mfr #: CKSSD

Category: Shelf Rack

Cabinet, Server, Telescopic Shelf, 1U

This is a 1U telescopic shelf for Hubbell server cabinets.

Item #: 4771814

Mfr #: CKTSD

Category: Shelf Rack

Cabinet : Fixed Shelf, Black(MCCPSHLF)

Hubbell is an international manufacturer of quality electrical and electronic products for commercial, industrial, utility, and telecommunications markets. Hubbell manufactures and sells electrical wiring devices, including plugs, connectors, receptacles, switches, lampholders, control switches, pendants, weatherproof enclosures, wall plates and more to a separate market segment of industrial and commercial customers.

Item #: 180810

Mfr #: MCCPSHLF

Category: Shelf Rack

Rack Shelf Perforated, 17in wide x 14in deep, black finish (MCCCS19P)

Hubbell is an international manufacturer of quality electrical and electronic products for commercial, industrial, utility, and telecommunications markets. Hubbell manufactures and sells electrical wiring devices, including plugs, connectors, receptacles, switches, lampholders, control switches, pendants, weatherproof enclosures, wall plates and more to a separate market segment of industrial and commercial customers.

Item #: 250379

Mfr #: MCCCS19P

Category: Shelf Rack

Cabinet, Sliding Shelf, Office White

This is a 2-pack of sliding tower shelves for your premise networking cabinet. They are colored Office White.

Item #: 424169

Mfr #: HPWTWRSHLV2W

Category: Shelf Rack

Sliding Tower Shelf

Hubbell is an international manufacturer of quality electrical and electronic products for commercial, industrial, utility, and telecommunications markets. Hubbell manufactures and sells electrical wiring devices, including plugs, connectors, receptacles, switches, lampholders, control switches, pendants, weatherproof enclosures, wall plates and more to a separate market segment of industrial and commercial customers.

Item #: 204061

Mfr #: MCCTWRSHLV2

Category: Shelf Rack

Shelf Bracket Kit for MDS 9000 Series, Spare

This telco and EIA shelf bracket kit (DS-SHELF) can temporarily or permanently support the Cisco MDS 9500 Series during installation. After the front rack-mount brackets are securely attached to the rack-mounting rails, the shelf bracket can be removed. This kit supports the following configurations: a Cisco MDS 9506 Director in a two-post telco rack, a Cisco MDS 9506 Director in...

Item #: 8054855

Mfr #: DS-SHELF=

Category: Shelf Rack

Shelf Bracket Kit for MDS 9000 Series

This telco and EIA shelf bracket kit (DS-SHELF) can temporarily or permanently support the Cisco MDS 9500 Series during installation. After the front rack-mount brackets are securely attached to the rack-mounting rails, the shelf bracket can be removed. This kit supports the following configurations: a Cisco MDS 9506 Director in a two-post telco rack, a Cisco MDS 9506 Director in...

Item #: 8054847

Mfr #: DS-SHELF

Category: Shelf Rack

CSU standard shelf, 12 slots

This product is a CSU standard shelf with (12) slots. It is intended for use with the T-SMART Intelligent CSU, the T-SERV II CSU, and the E-SMART Intelligent CSU from ADC Kentrox.

Item #: 135108

Mfr #: 77020

Category: Shelf Rack

Fixed Shelf for SmartRack 25U, 42U and 47U Enclosures

This SmartRack Fixed Heavy-duty Shelf from Tripp Lite is an ideal accessory for your SmartRack enclosure or open frame rack system. Designed for 4-post rack mounting, it features a 25.5 inch shelf depth and can support up to 250 lbs. The shelf can accomodate tower units, monitors, and other equipment. It is constructed of cold rolled steel with a black...

Item #: 6193448

Mfr #: SR202

Category: Shelf Rack

Rackmount Fiber Shelf 18-Port, 1U, Accepts 3 Adapter Panels

With this 16-gauge cold-rolled steel shelf, you can organize and protect fiber connections and splice trays in your 19" or 23" rackmount fiber applications. This shelf is particularly useful in high-density patch cord termination applications. It accepts three snap-in adapter panels for connections (available separately). Adapter panels are recessed horizontally in the swing-out tray for superior patch cord protection. A...

Item #: 7387324

Mfr #: JPM407A-R3

Category: Shelf Rack