Wall-Mounted CUBE-iT Plus Cabinet 48" High - 11996-748
This 48" high CUBE-iT Plus Cabinet is a wall-mounted and floor-supported telecommunications enclosure designed to secure communications equipment for a cross connect. The cabinets are copper and fiber ready and feature easy access to the front or the rear of the cabinet. The cabinet design delivers exceptional strength and rigidity. The cabinet can be attached to the wall to swing open from the right or left. The open and close motion is smooth and the hasp used to secure the cabinet body to the rear panel assists in drawing the body components together during the locking action. Additionally, the door may be attached to open from the right or left. Door and rear panel are keyed alike.
The 5" deep rear panel provides a space for terminating cables. The rear panel is pre-punched along the top and bottom with conduit knockouts allowing communications and power cables to be securely routed into the cabinet. Grommets are included to protect cables when conduit is not used. The interior of the rear panel has tie points for cables and attachment points for accessory equipment mounting brackets. The main cabinet body includes a pair of adjustable depth 19" EIA threaded equipment mounting rails that can be used to support interconnect equipment and/or active components. The sides of the cabinet body are vented and will accept an accessory fan kit to increase air changes in the cabinet. The edges of the front door are rounded to protect passers-by.
Wall-Mounted CUBE-iT Plus Cabinet 48" High - 11996-748
|
General
|
|
|
Product Type
|
Rack cabinet
|
|
Compatibility Notes
|
Features
Usable interior space: height 26U, width 19" EIA rack-mount, depth 22.8" Cable access: (4) 1 / 2" or 3 / 4" knockouts, 2 top/2 bottom; (8) 2-1 / 2" or 3" knockouts, 4 top / 4 bottom; (4) edge-protection grommets are included for 3" knockouts Material: steel sheet cabinet body, rear panel and door; door window is bronze acrylic sheet; equipment mounting rails are aluminum sheet Construction: riveted and bolted Finish: Epoxy-polyester hybrid powder coat paint Black
Equipment support
(1) pair L-shaped equipment mounting rails in the main cabinet body 19"W, EIA-310-D complaint Universal hole pattern, 5 / 8"-5 / 8"-1 / 2" vertical hole spacing Threaded #12-24 equipment mounting holes Depth-adjustable (bolted in place) 5"d rear panel punched to accept accessory equipment mounting brackets Includes (50) each #12-24 equipment mounting screws Vertical cable management: cable lacing points on the side of equipment mounting rails Load capacity: 200 pounds of equipment, open or closed
|
|
Contents
|
Unit, wall installation hardware, (50) #12-24 screws, documentation
|
|
Physical Dimensions
|
48"h x 24"w x 24"d
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
N/A
|
Wall-Mounted CUBE-iT Plus Cabinet 48" High - 11996-748
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=6341324#BVSecondaryCustomerRatings