Print page E-mail page

10BaseT RJ-45 to 10BaseFL Media Converter, single mode (SC)

More From: Transition Networks

Item #: 5413883

Mfr. Part#: CETTF1015-105

Availability: On Order

Est. Ship: Call for Availability

Extend Network Distance

Overview

Specs

Reviews

10BaseT RJ-45 to 10BaseFL Media Converter, single mode (SC) - CETTF1015-105

Ethernet 10Base-T Cabling
Supports Ethernet Networking
Data Transfer Speeds up to 10Mbps

Two 10BaseT to 10BaseFL Media Converters used back-to-back extend the distance between two 10BASE-T devices up to 40 km using single mode fiber without a repeater.

You can connect your workgroup to a distant server or a central switch; or extend distances between like and unlike devices in either full or half-duplex modes.

Connectivity
Cabling Type	Ethernet 10Base-T
Performance
Data Transfer Rate	10 Mbps
Protocols
Networking Protocol	Ethernet
Actual Weight	1.00 lb(s)
Contents	Media Converter, documentation
Physical Dimensions	3.4"h x 1.9"w x 5.0"d
Power Notes	Power Consumption 2.3 watts
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Transition Networks 10BaseT RJ-45 to 10BaseFL Media Converter, single mode (SC) - CETTF1015-105

Transition Networks 10BaseT RJ-45 to 10BaseFL MMF-ST 2KM with LA Power Supply - E-TBT-FRL-05-LA

Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before.Select Transition Networks' product now uses LANart's state-of-the-art ASIC technology. These chips go beyond the functions provided by off-the-shelf-silicon used by the competitors, to incorporate enhancements specific to media conversion technology such as link fault propagation...

Transition Networks 10BaseT RJ-45 TO 10BaseFL SMF 1310TX/1550RX SC 20KM Converter Module - CETTF1029-105

Extend Network Distance

Transition Networks T1/E1 RJ-45 to 850nm Media Converter MMF ST 2KM - SSDTF1011-105

The T1/E1 Copper to Fiber Media Converter enables the deployment of fiber into campus or industrial environments. This deployment of fiber into these environments provides a cost-effective solution and allows for the standardization on fiber as a media type. This is especially significant in industrial environments where fiber is immune to electrostatic interference "noise".

Transition Networks T1/E1 RJ-45 to 850nm Media Converter MMF ST 2KM - CSDTF1011-105

The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations.

Transition Networks T1/E1 Copper to Fiber Media Converter 1300nm SMF SC - SSDTF1015-105

Transition Networks Media Converter 10BaseT RJ-45 to 10BaseFL SMF ST - CETTF1012-105

Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before. AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. Because...

Transition Networks Media Converter 10BaseT RJ-45 to 10BaseFL SMF ST - CETTF1022-105

Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before. AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. Because...

Transition Networks Media Converter 10BaseT RJ-45 TO 10BaseFL MMF SC - CETTF1013-105

Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before. AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. Because...

Transition Networks Media Converter 10BaseT RJ-45 to 10BaseFL MMF ST - CETTF1011-105

Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before. AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. Because...

Transition Networks Media Converter 10BaseT RJ-45 to 10BaseFL MMF ST - CETTF1027-105

Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before. AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. Because...