Nfinity UPS 4000VA, (5) Batteries, 8 Bay Scaleable, Redundant Power and Control - N104C0512600
- Provides 4000VA, 2800watt(s) power / Surge Suppression is Standard
- Connector(s): Power Hard Wire 3-wire (2PH + G), Power Hard Wire 4-wire (2PH + N + G) / 1 Outlets
- 6 minute(s) Battery Runtime at Full Load / Attributes include Double conversion online
With the Liebert Nfinity UPS you can achieve the highest levels of UPS reliability in a system that is sized to protect your network applications. The Liebert Nfinity UPS is designed for use with workstations, servers, networks, telecommunications equipment or other sensitive electronics, and it provides continuous, high-quality AC power to your mission-critical systems, protecting them from any power aberrations due to blackouts, brownouts, surges or noise interference.
This Liebert Nfinity scalable 4 to 16 kVA power system is designed with N+x parallel redundancy to provide a fault-tolerant network of power protection for maximum systems availability. Its modular design makes Nfinity the most adaptable UPS on the market, offering easy upgrades and servicing. By simply installing additional power or battery modules, you can expand your current system, extend your backup runtime or add redundancy. Configurations can be cost-effectively upgraded without re-investing in a new system or installation. Hot-swappable modules allow you to add or replace power, battery, control, and display modules without shutting down the load or affecting power to it. In redundant mode, this means no downtime for repair. Liebert Nfinity’s hot-swappable modules also make it easy for the user to handle basic service.
Nfinity UPS 4000VA, (5) Batteries, 8 Bay Scaleable, Redundant Power and Control - N104C0512600
|
Connectivity
|
|
|
Connector
|
Power Hard Wire 3-wire (2PH + G)
|
|
Connector
|
Power Hard Wire 4-wire (2PH + N + G)
|
|
# Ports
|
1
|
|
Communication Interface
|
Serial (RS-232)
|
|
General
|
|
|
Form Factor
|
Tower
|
|
Attributes
|
Double conversion online
|
|
Power
|
|
|
Power Provided
|
4000 VA
|
|
Battery Run Time (max)
|
6 minute(s)
|
|
Power Provided
|
2800 watt(s)
|
|
Surge Suppression
|
Standard
|
|
Actual Weight
|
822.00 lb(s)
|
|
Contents
|
UPS, documentation
|
|
Physical Dimensions
|
40"h x 20"w x 28"d
|
|
Ports/Connectors
|
(1) Hard-wire 2Ph + G input
(1) Hard-wire 2Ph + N + G output
(1) DB-9 RS-232 serial communications port
(1) DB-9 relay contacts
(4) Intellislot ports
(1) Remote Emergency Power Off (REPO) connection
|
|
Power Notes
|
Unit rating: 2800W/4000VA
Output voltage: 208 / 120VAC or 240 / 120VAC
Voltage regulation: ±3%
Voltage transient response (100% step load): ±7%
Voltage stability (100% step load): ±7%
Recovery time: 96ms
Voltage distortion: <3% THD, linear load; <7% THD, non-linear load
Output frequency: 60Hz
Efficiency at 100% load: 89%
Output overload capability: 110-125% for 10 min, 126-150% for 10 sec, >151-200% for 2 cycles
Nominal input voltage: 170 to 276VAC, 110-276VAC (variable, based on output load)
Power factor: >.98
Input frequency (nominal): 60Hz
Input frequency range: 40-70Hz
Battery capacity: 9Ah
Autonomy time (full load): 7 min. (with an equal number of battery and power modules, in a non-redundant configuration)
Maximum charge current (full load): 3A
Nominal voltage: 120VDC
Recharge time: 3-5hrs. (to 90% capacity)
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
2 Years
|
|
Warranty - Parts
|
2 Years
|
Nfinity UPS 4000VA, (5) Batteries, 8 Bay Scaleable, Redundant Power and Control - N104C0512600
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=6368957#BVSecondaryCustomerRatings
Nfinity UPS 4000VA, (5) Batteries, 8 Bay Scaleable, Redundant Power and Control - N104C0512600