Head Lift Lever Assembly (10-Pack) - DPO15-2339-01

This is a 10-Pack:Each SuperDLTtape I Cartridge features a maximum capacity of 220GB (110GB, native). The tape itself is 0.498" wide and 1828 feet long. The cartridge shelf life is more than 30 years with less than 10% loss in demagnetization, at 20-degrees Celsius and 40% non-condensing humidity. In addition, its average usage is 1,000,000 head passes in a typical...

This is a 10-pack of tapes.The DLTtape IIIXT half-inch Tape Cartridge has a 15GB native capacity, 30GB compressed. It works with the DLT2000XT, DLT 4000, and DLT 7000 drives from Quantum. The tape is metal particle and .498 inches wide, 1828 feet long. The tape features: durability, with up to one million passes with a negligible impact on soft error...

These RJ-45 female-to-female couplers are used to extend the distance of standard Cat5 UTP cabling runs.This is a 10-pack.

This Cat5e RJ45 Keystone Jack supports both T568A and T568B wiring and uses the industry standard 110 interface. It fits any unloaded deystone wallplate. This is a 10-pack.

This is a 10-pack of Red/Black Ink Ribbons.

This is a 10-pack.This Super DLTtape II is high-capacity storage media with an archival life of over 30 years. The magnetic recording layer is thinner and its magnetic particle size is smaller than in the previous generation to boost tape drive performance with superior media capacity and superior reliability. It is DLTSage enabled, which better manages, predicts and proactively prevents...

This is a 10-pack of 70GB AIT-1 data cartridges.HP tape cartridges are continuously tested and monitored to deliver the highest quality and reliability to the market. With an installed base of over eleven million drives, tape cartridge media far surpasses any other media being used today for data backup reliability.

This is a 10-pack of HID Proximity Cards for your APC NetBotz Network appliances, which enable remote and local authentication for your NetShelter SX enclosures.

This Belkin Keystone Jack is designed for easy installation. The insert can be wired for both 568A and 568B, and snap quickly and positively into a variety of surface-mount boxes and wall plates (sold separately). Integration Series Cat6 System inserts are impedance-matched to interface seamlessly with Integration Series bulk cable and patch cables (sold separately). This is a 10-pack.