Fully Assembled InfraStruXure System with 10kVA Smart-UPS RT - ISXCR1SURT10KTP1

APC

Complete rack based systems.

Overview

Specs

Warranty

Reviews

Fully Assembled InfraStruXure System with 10kVA Smart-UPS RT - ISXCR1SURT10KTP1

Provides 10000VA power / Surge Suppression is Standard
Connector(s): Power Hard Wire 3-wire (2PH + G), Power NEMA L6-30 (F), Power NEMA 5-15 (F), Power NEMA L6-20 (F), Power NEMA 5-20 (F) / 31 Outlets
4 minute(s) Battery Runtime at Full Load

InfraStruXure for Server rooms is a rack based architecture that provides increased availability, speed of deployment, improved adaptability and lower total cost of ownership. This architecture is best suited for environments with 1 to 10 racks and require support for loads up to 16kVA. Pre-packaged systems are available with short lead times, quick and easy deployment and ship fully assembled.

This fully assembled InfraStruXure systems comprises the following: (1) APC 1U 19" Black Modular Toolless Blanking Panel - Qty 10; (1) Cable Containment Brackets; (1) Cable Management Rings (5 Large, 5 Small Rings); (1) NetShelter VX 42U Enclosure w/Sides Black; (1) Shielding Partition Pass-through 600mm wide Black; (1) Shielding Partition Solid 600mm wide Black; (1) APC Smart-UPS RT 10,000VA RM 208V; (2) APC Smart-UPS RT 2U 208-120V Step-Down Transformer; and (1) Rack PDU, Basic, Zero U,15A,120V, (14)5-15.

Connectivity
# Ports	31
Communication Interface	Serial (RS-232)
Communication Interface	Ethernet
Connector	Power Hard Wire 3-wire (2PH + G)
Connector	Power NEMA L6-30 (F)
Connector	Power NEMA L6-20 (F)
Connector	Power NEMA 5-15 (F)
Connector	Power NEMA 5-20 (F)
General
Form Factor	Tower
Power
Surge Suppression	Standard
Power Provided	10000 VA
Battery Average Run Time	4 minute(s)
Actual Weight	725.60 lb(s)
Contents	InfraStruXure system, CD with software, installation guide, user manual, Web / SNMP management card
Ports/Connectors	(1) Hard Wire 3-wire (2PH + G) outlets (14) NEMA 5-15 outlets (13) NEMA 5-20 outlets (2) NEMA L6-20 outlets (1) NEMA L6-30 outlet (1) Hard Wire 3 wire (1PH+1PH+G) input (1) DB-9 RS-232 management port (1) RJ-45 10 / 100 BaseT management port (1) Smart-Slot (occupied)
Power Notes	Configured Power: 8000W Configured Power: 10000VA Bypass Internal Bypass (Automatic and Manual) Output Frequency (sync to mains): 50 / 60Hz Crest Factor: 3 : 1 Waveform type: Sine wave Nominal input voltage: 208V Input frequency 50 / 60Hz Input voltage range for main operations: 160 - 280V Maintenance-free sealed Lead-Acid battery with suspended electrolyte Battery Volt-Amp-Hour Capacity: 1770 Replacement battery cartridge: RBC44 RBC Quantity: 2
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	3 Years
Warranty - Parts	3 Years

Related to APC Fully Assembled InfraStruXure System with 10kVA Smart-UPS RT - ISXCR1SURT10KTP1

APC Fully Assembled InfraStruXure System with 5kVA Smart-UPS RT - ISXCR1SURT5KTP1

InfraStruXure for Computer Rooms is an architecture best suited for environments that require single phase input power, range from 1-10 racks, and require support for loads up to 5KVA. Each system consists of standard power (UPS), rack, air, management, and service components pre-engineered to work together, a complete and customized rack-based system of network-critical physical infrastructure can be created to...

APC ISX 4-Post Rack with 10kVA Smart-UPS RT, 120/208V - ISXT110KVM1R4P

This is a four-post single rack InfraStruXure system that ships factory assembled, wired, tested and ready to roll into place. A system-level management device provides a single IP address with local and remote monitoring capabilities.

APC Netshelter SX InfraStruXure Integrated and Assembled with 10kVA Smart-UPS RT - ISXT110KVM1RSX

This NetShelter SX single rack InfraStruXure system ships factory assembled, wired, tested and ready to roll into place. The Web/SNMP Management Card, a system-level management device, provides a single IP address with local and remote monitoring capabilities.The system components include:NetShelter SX 42U 600mm Wide x 1070mm Deep Enclosure with Sides, Black (APC part AR3100, PCC SKU 6325906)Smart-UPS RT, 10000VA/8000W, Input...

APC Fully Assembled InfraStruXure System 1.5kVA Smart-UPS - ISXCR1SU1KP1

On-demand architecture for Network-critical Physical Infrastructure in computer rooms.

APC Smart-UPS RT 10kVA RM UPS 208V with (2) 208V to 120V 2U Step-Down Transformers - SURT10000RMXLT-2TF5

APC Smart-UPS RT is a family of high-density, performance UPSs for voice and data networks, medical labs, and light industrial applications. Featuring double conversion on-line topology, the Smart-UPS RT protects your data by supplying reliable, network-grade power. An unlimited number of matching battery packs can be added to comply with aggressive runtime demands of "always on" business-critical systems. Customers looking...

APC Smart-UPS RT 10kVA 208V UPS - SURT10000XLT

APC Smart-UPS RT 10kVA 208VAC UPS with (2) 208V to 120V Step-Down Transformers - SURT10000XLT-2TF3

APC Smart-UPS RT 10kVA/8kW 10U Rackmount 208V Hardwire Input (2) Step-down Transformers (26) Outlets - SURT10KRMXL6U-TF5

The APC Smart-UPS RT is a high-density, performance UPS for voice and data networks, medical labs, and light industrial applications. Capable of supporting 10kVA in a 10U rack/tower convertible form, users can support power hungry blade servers or heavily loaded equipment racks. This flexible form factor allows standardization across multiple applications. High power internal chargers allow virtually unlimited additional matching...

APC Smart-UPS RT, 10000VA/8000W, Input 208V/Output 208V, Interface Port DB-9 RS-232, RJ-45 10/100 Base-T - SURT10000RMXLT