Motherboard, E7210, PGA478, P4/Celeron, 800MHz, Max.4GB DDR, ATX, 2PCIX, 2PCI, Video, GBE2, SATA - MBD-P4SCI-O
- Intel E7210 chipset supports 1 compatible processors
- Up to 4GB DDR SDRAM
- ATX form factor
The P4SCi ATX motherboard features the Intel E7210 chipset and a single mPGA478 ZIF Socket that supports (Hyper-Threading enabled) an Intel Pentium 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition) or an Intel Pentium 4 processor with up to 3.2GHz (only use processors with 90 nano or 0.13 micron technology) or an Intel Celeron processor with 128KB of integrated Advanced Transfer Cache up to 2.8GHz. It also supports an 800/533/400MHz system bus and up to 4GB DDR400/333/266 memory. On-board devices include a SATA controller on-chip, dual SATA ports with RAID 0,1 support, one Intel 82547GI CSA Gigabit Ethernet Controller and one Intel 82541 Gigabit Ethernet Controller (supports 10BaseT, 100BaseTX, and 1000BaseT), both with RJ45 output. For graphics it features the ATI Rage XL SVGA PCI video controller with 8 MB of video memory. Dual EIDE channels support up to four UDMA IDE devices (supports UDMA Mode 5, PIO Mode 4, and ATA/100). There are two PCI-X slots, two PCI slots and up to 5 USB ports. It comes with SuperO Doctor III and Watch Dog software.
Motherboard, E7210, PGA478, P4/Celeron, 800MHz, Max.4GB DDR, ATX, 2PCIX, 2PCI, Video, GBE2, SATA - MBD-P4SCI-O
|
General
|
|
|
Mainboard Type
|
Desktop
|
|
Motherboard Form Factor
|
ATX
|
|
Memory
|
|
|
RAM (installed)
|
0 MB
|
|
RAM (max)
|
4 GB
|
|
RAM Technology
|
DDR SDRAM
|
|
Cache Memory (installed)
|
0 KB
|
|
Processor
|
|
|
# Processors Supported
|
1
|
|
# Processors Installed
|
0
|
|
Compatible Processors
|
Pentium 4
|
|
Chipset Type
|
Intel E7210
|
|
Compatible Processors
|
Celeron
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Storage Controller Type
|
ATA (IDE)
|
|
Storage Controller Type
|
SATA
|
|
Video
|
|
|
Video Card
|
ATI Rage XL SVGA
|
|
Video RAM (installed)
|
8 MB
|
|
Compatibility Notes
|
Chassis (Optimized for P4SCi): 1U Chassis: SC811i-250 2U Chassis: SC822i-400LP Rackmount Tower / 4U: SC742i-300
|
|
Contents
|
Board, documentation
|
|
Memory Notes
|
0GB dual channel DDR400 / 333 / 266 (ECC or non-ECC) unbuffered SDRAM, expandble to 4GB There are four available184-pin DIMM sockets
|
|
Physical Dimensions
|
12" x 9.5"
|
|
Ports/Connectors
|
Expansion slots: (2) 64-bit 66MHz PCI-X (3.3V), (2) 32-bit 33MHz PCI (5V)
I/O: (2) EIDE channels support up to four UDMA IDE devices (supports UDMA Mode 5, PIO Mode 4, and ATA/100) (1) Floppy controller; 1.44 MB, 2.88 MB, 3-mode support (2) USB 2.0 / 1.1 ports (1) USB header supports additional 2 USB 2.0 / 1.1 ports) (2) Serial (Fast UART 16550) (1) VGA (1) Parallel (ECP / EEP) (2) RJ45 (2) PS/2 (keyboard, mouse)
|
|
Power Notes
|
Important Note: To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. Total of five 3-pin fan headers (3) fans with tachometer monitoring
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
N/A
|
Motherboard, E7210, PGA478, P4/Celeron, 800MHz, Max.4GB DDR, ATX, 2PCIX, 2PCI, Video, GBE2, SATA - MBD-P4SCI-O
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=5108838#BVSecondaryCustomerRatings