Motherboard, nForce Pro 2200, Dual Opteron, EATX, Max 32GB DDR, 2PCIEX8, 2PCIX, GBE,Vid, SATA 3Gb - MBD-H8DCR-I-O
- NVIDIA nForce Prof. 2200 chipset supports 2 compatible processors
- Up to 32GB DDR SDRAM
- Extended ATX form factor
Supermicro combines the capabilities of nVidia's Media & Communications Processors (2200 + 2050) to create motherboards that support dual AMD Opteron 200 series processors, two PCI-Express x8 lanes for dual graphics cards, and support for high-performance SATA2 (3Gb/s) devices. With virtual channels enabled in the PCI-E lanes, low latencies and full bandwidth per lane are possible.
Motherboard, nForce Pro 2200, Dual Opteron, EATX, Max 32GB DDR, 2PCIEX8, 2PCIX, GBE,Vid, SATA 3Gb - MBD-H8DCR-I-O
|
General
|
|
|
Motherboard Form Factor
|
Extended ATX
|
|
Mainboard Type
|
Server
|
|
Memory
|
|
|
Cache Memory (installed)
|
0 MB
|
|
RAM (installed)
|
0 GB
|
|
RAM (max)
|
32 GB
|
|
RAM Technology
|
DDR SDRAM
|
|
Processor
|
|
|
Chipset Type
|
NVIDIA nForce Prof. 2200
|
|
Compatible Processors
|
Opteron 2xx
|
|
# Processors Installed
|
0
|
|
# Processors Supported
|
2
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Storage Controller Type
|
SATA 3.0 Gbps
|
|
Storage Controller Type
|
RAID
|
|
Video
|
|
|
Video RAM (installed)
|
8 MB
|
|
Video Card
|
Integrated ATI Rage XL
|
|
Compatibility Notes
|
Chassis optimized for H8DCR-i: 1U Chassis: SC813T+-500 SC813i+-500 Processor: Dual 940-pin ZIF Sockets Supports up to two Dual-Core AMD Opteron 200 Series processor(s) Single CPU configurations are not recommended VRM x3
|
|
Contents
|
Motherboard, cables, software, documentation
|
|
Memory Notes
|
0GB unbuffered ECC DDR 400MHz SDRAM up to 16GB or DDR 333, 266 MHz SDRAM up to 32GB. There are eight (8) 184 pin DIMM sockets.
Video memory: 8MB
|
|
Physical Dimensions
|
12" x 13.1"
|
|
Ports/Connectors
|
Expansion slots: (2) PCI-express x8 slots, (1) 64-bit 100MHz PCI-X slot, (1) 64-bit 133MHz PCI-X slot Note: Dual Processors are required for correct PCI-X expansion slot operation
On board devices: Chipset nVidia nForce Pro 2200 (CK804) AMD 8132 nVidia nForce Pro 2200 SATA 3.0Gbps Controller, (4) SATA ports, nVidia RAID 2.0, SATA RAID 0, 1, 0+1 Support Dual EIDE channels support up to four UDMA IDE devices, supports UDMA Mode 5, supports PIO Mode 4, supports ATA 100 / 133 (2) Broadcom BCM5721 Gigabit LAN / Ethernet Controllers, supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output ATI Rage XL 8MB graphics Super I/O Winbond 83627HG Clock Generator ICS8634 IPMI 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B), Remote Management Module (Card not included) I/O: (1) Floppy port, 1.44 MB (2) RJ45 LAN ports USB: FUCI, up to 4 USB Ports 2.0 compliant, 1.1 compatible 2 rear ports, 2 internal headers) (1) VGA port PS/2 keyboard and mouse ports (1 )Fast UART 16550 serial port , 1 header
|
|
Power Notes
|
To ensure system stability, a 500W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 20-pin are required]
Power configurations: ACPI Power Management Wake-On-Ring (WOR) headert Wake-On-LAN (WOL) header Power-on mode control for AC power loss recovery Internal / External modem remote ring-on Cooling: Total up to 5-fan status tachometer monitoring Up to five 3-pin fan headers Monitoring for CPU and chassis environment CPU Thermal Trip Support I2C Temperature Sensing Logic
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
3 Years
|
|
Warranty - Parts
|
3 Years
|
Motherboard, nForce Pro 2200, Dual Opteron, EATX, Max 32GB DDR, 2PCIEX8, 2PCIX, GBE,Vid, SATA 3Gb - MBD-H8DCR-I-O
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=7486226#BVSecondaryCustomerRatings