Print page E-mail page

High Power 30W PoE Splitter+Injector Combo Kit

More From: CP Technologies

Item #: 10048921

Mfr. Part#: PIS-3100

Availability: Limited Quantities Available

Est. Ship: Usually Ships in 48 Hrs

Overview

Specs

Reviews

High Power 30W PoE Splitter+Injector Combo Kit - PIS-3100

The PIS- 3100 transmits both power and data using only a single Cat 5 Ethernet cable. This gives users greater flexibility when choosing a location for a device. They do not need to worry about nearby AC power outlets or building a power infrastructure when using PIS-3100.

The PIS-3100, a high power PoE kit, contains two units - PSE (Power Sourcing Equipment) and PD (Powered Device). PSE has a maximum output power of 30W. If it overflows, overloads, short-circuits, or overheats, the PSE automatically shuts down and restarts once the issues are solved. The PD is able to separate the data and power. This adds PoE functionality to non-PoE devices whose power consumption is up to 24W.

Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	Call for Warranty
Warranty - Parts	Call for Warranty

Related to CP Technologies High Power 30W PoE Splitter+Injector Combo Kit - PIS-3100

CP Technologies High Power PoE Injector 40W - POI-4000

The IEEE 802.3af standard limits the maximum current on an Ethernet cable to 350Ma. This provides for a maximum end-point power consumption of 12.95 watts, which is fine for some devices. But many professional networking devices require more power.LevelOne POI-4000 is a high power, PSE Power Injector for use in Power over Ethernet systems. This provides excellent support for PD...

PowerDsine 1-Port High Power 30W Gigabit, 10/100/1000BaseT - PD-7001G/AC

The PD-7001G is a solution to the growing demand for PoE, which powers end-terminals above the 15.4W supported by the existing 802.3af standard, as a step towards 802.3at - PoE's high power standardThe PD-7001G allows a safe and cost effective PoE solution for Ethernet end terminals. More devices can be powered via the network, thus eliminating the need to use...

PowerDsine HIGH POWER 24PORT POE MIDSPAN ACCSAC INPUT FULL POWER WITH MANAGEMENT - PD-7024G/AC/M

The PowerDsine 7000G Family is designed specifically to power PTZ and Dome network cameras, 802.11n access points, thin clients, video phones and other Ethernet end terminals that require high power. The PowerDsine 7000G Family are fully backward compatible and safe to use with any 802.3af terminal such as VoIP phones, IP cameras and WLAN access points. With PowerDsine PoE Midspans,...

CP Technologies PoE Splitter - POS-1000

LevelOne's POS-1000 is a PoE splitter to integrate Power over Ethernet (PoE) technology to legacy appliance by just using a single Cat 5 Ethernet cable for both power and data transaction. The legacy equipments which connect to POS-1000, all devices become PoE enabled to eliminate the need of power outlets as well as cable installation and expense. To avoid overvoltage...

Axis Communications T8126 High PoE Splitter, 12V - 5014-501

The Axis High Power over Ethernet splitters offer an easy, fast and cost-effective solution for powering network video products -- specifically PTZ (pan/tilt/zoom) and PTZ dome network cameras -- without the need to install power outlets and electrical cabling. It enables Axis network video products with high power consumption (up to 20 Watts) to receive data and power over the...

PowerDsine 6-Port Power Over Ethernet Midspan AC Input, High Power Output, 803.3AF and Cisco Supported - PD-8006/AC/M

PowerDsine 8006/8012/8001 are Power over Ethernet midspans which enable a unified supply of data, voice, video and power through a single access point by sending power over standard Category 5 and above twisted pair cable.The 8000 High-Power midspan (PoE injector) series eliminates the need for external power supply and its associated AC/DC power cabling, thus providing a highly cost effective,...

TRENDnet 108Mbps Wireless Super G High Power Outdoor PoE Access Point - TEW-455APBO

Add additional high-gain antennas for extended range projects.

Axis Communications T92A20 Housing with High Power over Ethernet - 5015-204

AXIS T92A20 Housing is tailor-made and carefully tested to comply with Axis network cameras. This stylishly designed housing has a side opening and pre-installed High Power over Ethernet splitter for quick and easy installation. The pre-installed High Power over Ethernet splitter provides power both for the camera and for heating the housing, eliminating the need for additional power cables.

TRENDnet Power Over Ethernet (PoE) Splitter, 1-in/1-out, CSMA/CD - TPE-102S

The TPE-102S Power over Ethernet Splitter provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain. This splitter allows you to split one PoE source into separate power and...

Axis Communications T8128 High PoE Splitter, 24V - 5014-511

Axis High Power over Ethernet midspan and splitters offer an easy, fast and cost-effective solution for powering network video products - specifically PTZ (pan/tilt/zoom) and PTZ dome network cameras - without the need to install power outlets and electrical cabling.The High PoE products make it easier to install network video products in areas where power cabling and outlets are unavailable....