10000VA UPS Smart Online Rack/Tower PureSine 10kVA 200-240V (6) Outlet - SU10000RT3U
- Provides 10000VA, 8000watt(s) power / Surge Suppression is Standard
- Connector(s): Hardwired, Power NEMA L6-20 (F), Power NEMA L6-30 (F) / 6 Outlets
- 6 minute(s) Battery Runtime at Full Load / Attributes include Double conversion online
This 10kVA on-line, double-conversion UPS system will provide reliable back-up power for your critical server, network and telecommunications equipment. It installs in only 6 rack spaces (3U power module and 3U battery pack) with a maximum installed rack depth of 32.5 inches. Battery runtime is expandable with the optional BP192V12-3U external battery pack. Its reliable output is a full time sine wave at 200, 208, 220, 230, or 240VAC, +/-2%. This true on-line, double-conversion UPS system actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. It operates continuously without using battery power during brownouts to 156V and overvoltages to 276V. Output is available using standard NEMA L6-30R and L6-20R output receptacles, while input power is from a standard 3-wire 208V hardwire input connection.
A detachable input-output PDU module with a manual bypass switch enables hot-swap UPS replacement without disrupting connected equipment. The UPS also provides network-grade AC surge and noise suppression and zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via RS-232, a contact-closure port and a slot for an optional SNMPWEBCARD. Also supported are simultaneous detailed monitoring of equipment load levels, self-test data and mains power conditions via all 3 network interfaces at once. And PowerAlert monitoring software and complete cabling is also included.
10000VA UPS Smart Online Rack/Tower PureSine 10kVA 200-240V (6) Outlet - SU10000RT3U
|
Connectivity
|
|
|
Communication Interface
|
Serial (RS-232)
|
|
Communication Interface
|
Contact closure
|
|
Connector
|
Hardwired
|
|
Connector
|
Power NEMA L6-30 (F)
|
|
Connector
|
Power NEMA L6-20 (F)
|
|
# Ports
|
6
|
|
General
|
|
|
Attributes
|
Double conversion online
|
|
Form Factor
|
6U Rackmount
|
|
Power
|
|
|
Battery Run Time (max)
|
6 minute(s)
|
|
Power Provided
|
10000 VA
|
|
Power Provided
|
8000 watt(s)
|
|
Surge Suppression
|
Standard
|
|
Actual Weight
|
192.00 lb(s)
|
|
Compatibility Notes
|
COMMUNICATIONS
Network monitoring port: Includes 2 built-in DB9 monitoring ports (1-RS232 / 1-contact closure)
Software and cabling included: Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Cabling included.
SNMP compatibility: Built-in accessory slot accommodates internal SNMP / Web card and other network accessories
LINE / BATTERY TRANSFER
Transfer time from line power to battery mode: Zero, online UPS continuously converts incoming AC to DC, then back to AC. When line power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.
Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 156VAC. Below this point, output is maintained utilizing battery reserves.
High voltage transfer to battery power: Maintains continuous operation during overvoltages to 276V AC. Above this point, output is maintained utilizing battery reserves.
|
|
Contents
|
Power module, external battery pack, documentation
|
|
Physical Dimensions
|
10.5"h x 17.5"w x 32.5"d
|
|
Ports/Connectors
|
(4) NEMA L6-20R outlets
(2) NEMA L6-30R outlets
(1) Hardwire input
(1) DB-9 RS-232 management port
(1) DB-9 Contact closure port
(1) Accessory slot (available)
|
|
Power Notes
|
Voltage compatibility: 208VAC (200 / 208 / 220 / 230 / 240V)
Frequency compatibility: 50 / 60Hz
Output capacity: 10000W/8000VA
Output nominal voltage: 208VAC (200 / 208 / 220 / 230 / 240V)
Output voltage regulation: maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 3% total harmonic distortion when used with computer loads
Output frequency regulation: regulates line frequency to 50 / 60Hz + / - 0.05Hz
Maximum input amps: 200v - 35A / 208v - 33.7A / 220v -31.8A / 230v - 30.4A / 240v - 29.2A
Full load runtime: 6 minutes (10000VA / 8000W)
Half load runtime: 12 minutes (5000VA / 4000W)
Expandable battery runtime Supports extended runtime with optional external battery packs
External battery pack compatibility BP240V10RT3U; BP240V557C-1PH; BP240V787C-1PH; BP240V1037C-1PH; BP240V1407C-1PH
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
2 Years
|
|
Warranty - Parts
|
2 Years
|
|
Warranty Details
|
$250, 000 connected equipment insurance
|
10000VA UPS Smart Online Rack/Tower PureSine 10kVA 200-240V (6) Outlet - SU10000RT3U
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=6679026#BVSecondaryCustomerRatings