Series 5 5125 1500VA 1340W UPS Two-In-One IEC Input and Output 230V - 05146670-5501
- Provides 1500VA power / Surge Suppression is Standard
- 7 minute(s) Battery Runtime at Full Load
Featuring capabilities often found in higher kVA units, the 5125 incorporates load segments which enable scheduled shutdowns and load shedding, and offers advanced communications with Powerware's complete power management Software Suite for extensive control and monitoring. The Powerware 5125 features Advanced Battery Management (ABM) technology, which doubles battery service life, critical to maximizing system availability. ABM technology also minimizes recharge time and provides up to 60 days notification when batteries are approaching the end of their useful life.
When alarm notification indicates the end of battery life is near, batteries can be hot-swapped without powering down the connected load. User friendly design allows batteries to be exchanged through the front of the unit. The Powerware 5125's design provides high power density, which conserves valuable space in rack, bench, bookshelf or floor appliances. All models are manufactured to ISO 9001 standards and meet or exceed worldwide specifications for safety, performance and excellence. The Powerware 5125 Two-in-One form factor packs the same technology of the tower model into a compact design for standard 19-inch equipment racks or use as a stand-alone unit. By limiting the rack height (2U) of the UPS, the Powerware 5125 saves room for other critical equipment such as servers and disk arrays.
In addition, installable X-Slot option cards provide enhanced communication and scalable power protection for computer equipment.
Series 5 5125 1500VA 1340W UPS Two-In-One IEC Input and Output 230V - 05146670-5501
|
General
|
|
|
Form Factor
|
Rack-mountable
|
|
Power
|
|
|
Battery Run Time (max)
|
7 minute(s)
|
|
Power Provided
|
1500 VA
|
|
Surge Suppression
|
Standard
|
|
Actual Weight
|
61.00 lb(s)
|
|
Compatibility Notes
|
User Interface Front Control Panel
Audible Alarms For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault
Network Transient Protector UL 497 A, in/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection)
REPO Port Meets NEC code 645-11 intent and UL requirements
X-Slot Interface RS-232 Single Serial Card (standard), other options available
Cable 6-foot communications cable included
Power Management Software Powerware Software Suite CD-ROM (bundled with UPS)
|
|
Contents
|
UPS, software and documentation
|
|
Physical Dimensions
|
3.5"h x 17"w x 19.4"d
|
|
Power Notes
|
Output capacity: 1340W/1500VA
Nominal input voltage: 220 / 230 / 240V AC
Input voltage range: 154-288V AC (+20 / -30% of nominal)
Operating frequency: 50 / 60Hz auto sensing
Input power factor: Same as load
Nominal output voltage: 220 / 230 / 240V AC
Output voltage regulation: -10% / +6% of selected nominal voltage
Overload capacity: 110% 3 min; 150% 10 cycles
Efficiency: 95%
Typical runtime, half load: 13 minutes (670W)
Typical runtime, full load: 5 minutes (1340W)
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
N/A
|
Series 5 5125 1500VA 1340W UPS Two-In-One IEC Input and Output 230V - 05146670-5501
1
Year PC Connection Consumer Electronic Coverage ($501 - $750), EXT
2
Year PC Connection Consumer Electronic Coverage ($501 - $750), EXT
Series 5 5125 1500VA 1340W UPS Two-In-One IEC Input and Output 230V - 05146670-5501
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=5153575#BVSecondaryCustomerRatings