Print page E-mail page

Surge Protection Cable For Smart Serial Cables

More From: Cisco

Item #: 6697275

Mfr. Part#: CAB-SS-SURGE

Availability: On Order

Est. Ship: Call for Availability

Cisco surge protection cables are the smart option to protect your network from outages due to electrical storms and other ESD events.

Overview

Specs

Reviews

Surge Protection Cable For Smart Serial Cables - CAB-SS-SURGE

Warranty: N/A

In order to improve the network reliability of installations subject to surge events, Cisco offers the CAB-SS-SURGE surge protection cable for Smart Serial interfaces. If a surge event (Lightning/ESD) is coupled onto the cables that interface with the serial card, energy can couple into the transceivers on the front end of the card. The addition of a passive cable assembly (with internal clamping circuitry) can prevent this energy from damaging the transceivers on the front end of the interface. When a voltage over the normal operating levels seen in the serial communication are present on the front end of the interface they are clamped to ground. This cable attaches to the Smart Serial connector on the WIC-2T, WIC-2A/S, HWIC-4T, HWIC-4A/S, or NM-16A/S on the router, and connects to the standard Smart Serial cable on the other end.

This cable supports all Smart Serial protocols: EIA-232D, V.35, X.21, EIA-449, EIA-530, and EIA-530A. It provides the maximum protection by having the surge protection closest to the port that needs protection.

Compatibility Notes	Supported Serial Interfaces: WIC-2T, 2-Port Serial WAN Interface Card WIC-2A / S, 2-Port Async / Sync Serial WAN Interface Card HWIC-4T, 4-Port Serial HWIC HWIC-4A / S, 4-Port Async / Sync Serial HWIC NM-16A / S, 16-Port Async / Sync Serial Network Module Supported Smart Serial Cables: CAB-SS-V35MT CAB-SS-V35FC CAB-SS-232MT CAB-SS-232FC CAB-SS-449MT CAB-SS-449FC CAB-SS-X21MT CAB-SS-X21FC CAB-SS-530MT CAB-SS-530AMT
Contents	Cable, documentation
Returns Policy	Due to manufacturer restrictions, all sales on this item are final.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Cisco Surge Protection Cable For Smart Serial Cables - CAB-SS-SURGE

Cisco RS-530 Cable, DTE Male to Smart Serial, 10ft. - CAB-SS-530MT=

This 10-foot RS-530 Cable (DTE Male to Smart Serial) is compatible with a broad range of appropriate Cisco networking devices.

Cisco Extended 12-in-1 Female DCE Smart Serial Interface Cable - CAB-SS-232FC-EXT

This is a female DCE Cisco Extended 12-in-1 Smart Serial Interface cable.

Cisco Male DTE to Smart Serial V.35 Cable 10 FT Cisco 2600 Series - CAB-SS-V35MT=

This cable is intended for use with the Cisco 2600 series Routers. It is a V.35 cable with a male DTE to Smart Serial connector and is 10ft. long.

Cisco DCE F to Smart Serial RS-232 Cable, 10 Ft. - CAB-SS-232FC

This product is a 10' DCE Female to Smart Serial RS-232 Cable intended for use with the Cisco 1700 Series Router. The cable features a 60-pin female connector and a 25-pin female connector.To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to essential information, and advanced hardware replacement....

Cisco V.35 Smart Serial Cable, Shielded, 10ft - CAB-SS-V35FT=

This Cisco Smart Serial cable has a DTE female to a V.35 male connector.

Cisco DCE F to Smart Serial RS-232 Cable, 10 Ft. - CAB-SS-232FC=

This product is a 10' DCE Female to Smart Serial RS-232 Cable intended for use with the Cisco 1700 Series Router. The cable features a 60-pin female connector and a 25-pin female connector.

Cisco Female DCE to Smart Serial RS-449 Cable, 10ft. - CAB-SS-449FC

Smart Serial Connector cables are specific to the new dual-serial port WAN interface cards and feature Cisco`s new, compact, high-density Smart Serial connector to support a wide variety of electrical interfaces when used with the appropriate transition cable. Two cables are required to support the two ports on the WIC. Each port on a WIC can support a different physical...