Smart-UPS VT 30 kVA 208V Rack with (3) Battery Modules Expandable to (5) with PDU, Startup - SUVTR30KF3B5S
- Provides 30000VA, 24000watt(s) power / Surge Suppression is Standard
- Connector(s): Power Hard Wire 5-wire (3PH + N + G), Power NEMA L21-20 (F) / 6 Outlets
- 5.5 minute(s) Battery Runtime at Full Load / Attributes include Double conversion online
This APC Smart-UPS VT provides 30kVA of backup power with a dual mains power source and battery modules connected in parallel for increased availability. Scalable runtime allows additional run time to be quickly added as needed. Clean, uninterrupted power to protected equipment is provided while batteries are being replaced or when generator power is used.
Features include: field-replaceable power distribution panel, locking cabinet, multiple cable-entry points and resettable circuit breakers. Its modular design provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules. InfraStruXure Manager enables centralized management and the UPS can be manage remotely over the network. Intelligent battery management provides higher availability through intelligent precision-charging that maximizes battery performance, life, and reliability.
Smart-UPS VT 30 kVA 208V Rack with (3) Battery Modules Expandable to (5) with PDU, Startup - SUVTR30KF3B5S
|
Connectivity
|
|
|
# Ports
|
6
|
|
Communication Interface
|
Ethernet
|
|
Connector
|
Power Hard Wire 5-wire (3PH + N + G)
|
|
Connector
|
Power NEMA L21-20 (F)
|
|
General
|
|
|
Form Factor
|
Rack-mountable
|
|
Attributes
|
Double conversion online
|
|
Power
|
|
|
Power Provided
|
24000 watt(s)
|
|
Battery Average Run Time
|
5.5 minute(s)
|
|
Power Provided
|
30000 VA
|
|
Surge Suppression
|
Standard
|
|
Actual Weight
|
1444.00 lb(s)
|
|
Compatibility Notes
|
Communications and Management
Pre-Installed SmartSlot Card: AP9619
Control panel: multi-function LCD status and control console
Audible alarm: audible and visible alarms, configurable delays
Emergency Power Off (EPO): Yes
|
|
Contents
|
UPS, power modules, Smart-UPS signalling RS-232 cable, startup service, Web / SNMP management card, software, documentation
|
|
Physical Dimensions
|
78.5"h x 23.6"w x 42.3"d
|
|
Ports/Connectors
|
(1) Hard Wire 5-wire (3PH + N + G) for output
(5) NEMA L21-20R outlets
(1) Hard Wire 5-wire (3PH + N + G) for input
(1) SmartSlot expansion port with AP9619 Web / SNMP card installed
|
|
Power Notes
|
Output
Output power capacity: 24, 000W/30, 000VA
Maximum configurable power: 24, 000W/30, 000VA
Nominal output voltage: 120V, 208V, 208V 3PH
Output voltage note: configurable for 200, 208 or 220VAC 3 Phase nominal output voltage
Efficiency at full load: 93.30%
Output voltage distortion: less than 5% at full load
Output frequency (sync to mains): 57-63Hz for 60Hz nominal
Crest factor: Unlimited
Waveform type: sine wave
Input
Bypass: built-in maintenance bypass, built-in static bypass
Nominal input voltage: 208VAC 3PH
Input frequency: 40-70Hz
Input voltage range for main operations: 165-240VAC
Other input voltages: 220VAC
Maximum input current: 80A
Input breaker capacity: 125A
Batteries and Runtime
Battery type: VRLA
Included battery modules: (3)
Available battery slots: (2)
Typical recharge time: 3 hours
RBC quantity: (3)
Typical backup time at half load: 18.3 minutes (12000W)
Typical backup time at full load: 5.5 minutes (24000W)
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
|
Warranty Details
|
Startup Service included
|
Smart-UPS VT 30 kVA 208V Rack with (3) Battery Modules Expandable to (5) with PDU, Startup - SUVTR30KF3B5S
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=7762542#BVSecondaryCustomerRatings