Print page E-mail page

Nfinity UPS 4000VA, (4) Batteries, 8 Bay Scaleable, Fully Redundant

Liebert

Item #: 6368990

Mfr. Part #: N104F0412600

Maximum Protection for Mission-critical Network Applications

Overview

Specs

Reviews

Nfinity UPS 4000VA, (4) Batteries, 8 Bay Scaleable, Fully Redundant - N104F0412600

Provides 4000VA, 2800watt(s) power / Surge Suppression is Standard
Connector(s): Power Hard Wire 4-wire (2PH + N + G), Power Hard Wire 3-wire (2PH + G) / 1 Outlets
36 minute(s) Battery Runtime at Full Load / Attributes include Double conversion online

With the Liebert Nfinity UPS you can achieve the highest levels of UPS reliability in a system that is sized to protect your network applications. The Liebert Nfinity UPS is designed for use with workstations, servers, networks, telecommunications equipment or other sensitive electronics, and it provides continuous, high-quality AC power to your mission-critical systems, protecting them from any power aberrations due to blackouts, brownouts, surges or noise interference.

This Liebert Nfinity scalable 4 to 16 kVA power system is designed with N+x parallel redundancy to provide a fault-tolerant network of power protection for maximum systems availability. Its modular design makes Nfinity the most adaptable UPS on the market, offering easy upgrades and servicing. By simply installing additional power or battery modules, you can expand your current system, extend your backup runtime or add redundancy. Configurations can be cost-effectively upgraded without re-investing in a new system or installation. Hot-swappable modules allow you to add or replace power, battery, control, and display modules without shutting down the load or affecting power to it. In redundant mode, this means no downtime for repair. Liebert Nfinity’s hot-swappable modules also make it easy for the user to handle basic service.

Connectivity
Connector	Power Hard Wire 4-wire (2PH + N + G)
Connector	Power Hard Wire 3-wire (2PH + G)
# Ports	1
Communication Interface	Serial (RS-232)
General
Form Factor	Tower
Attributes	Double conversion online
Power
Surge Suppression	Standard
Battery Average Run Time	36 minute(s)
Power Provided	2800 watt(s)
Power Provided	4000 VA
Actual Weight	756.00 lb(s)
Contents	UPS, documentation
Physical Dimensions	40"h x 20"w x 28"d
Ports/Connectors	(1) Hard-wire 2Ph + G input (1) Hard-wire 2Ph + N + G output (1) DB-9 RS-232 serial communications port (1) DB-9 relay contacts (4) Intellislot ports (1) Remote Emergency Power Off (REPO) connection
Power Notes	Unit rating: 2800W/4000VA Output voltage: 208 / 120VAC or 240 / 120VAC Voltage regulation: ±3% Voltage transient response (100% step load): ±7% Voltage stability (100% step load): ±7% Recovery time: 96ms Voltage distortion: <3% THD, linear load; <7% THD, non-linear load Output frequency: 60Hz Efficiency at 100% load: 89% Output overload capability: 110-125% for 10 min, 126-150% for 10 sec, >151-200% for 2 cycles Nominal input voltage: 170 to 276VAC, 110-276VAC (variable, based on output load) Power factor: >.98 Input frequency (nominal): 60Hz Input frequency range: 40-70Hz Battery capacity: 9Ah Autonomy time (full load): 7 min. (with an equal number of battery and power modules, in a non-redundant configuration) Maximum charge current (full load): 3A Nominal voltage: 120VDC Recharge time: 3-5hrs. (to 90% capacity)
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	2 Years
Warranty - Parts	2 Years