Print page E-mail page

FastTrac L-Support Bracket, 4" Wide, Zinc Electroplated

Chatsworth Products FastTrac L-Support Bracket, 4

More From: Chatsworth Products, Inc.

Item #: 6823471

Mfr. Part#: 13355-004

Availability: On Order

Est. Ship: Call for Availability

FastTrac L-Support Bracket, 4" Wide, Zinc Electroplated - 13355-004

A FastTrac Cable Tray (available separately) may be used under raised floors in data centers to create point-to-point pathways for communications cabling. The FastTrac L Support Bracket is attached to the floor pedestal with a single pedestal clamp each and each holding a single cable tray.

General
Product Type	Bracket
Compatibility Notes	Supports a single tray Use one support every other floor pedestal Material: 12 GA Steel Construction: Formed Finish: Zinc electroplated after fabrication Installation requires (1) Pedestal Clamp (not included)
Contents	Unit, documentation
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Chatsworth Products FastTrac L-Support Bracket, 4" Wide, Zinc Electroplated - 13355-004

Chatsworth Products FastTrac Triangular Support Bracket, 4" Wide, Zinc Electroplated - 13356-004

This FastTrac Triangle Support Bracket Supports a single tray and one is used on every other floor pedestal. The material is 14 GA steel, formed construction and Zinc electroplated after fabrication.Installation requires (1) Pedestal Clamp (CPI p/n 13374-001, not included) for each bracket.

Chatsworth Products FastTrac L-Support Bracket 6-8" Wide, Zinc Electroplated - 13355-008

FastTrac L Support Bracket attaches directly to the wall providing support for your FastTrac Cable Tray running parallel to the wall. Each support holds a single cable tray. It features a Zinc Electroplate finish.

Chatsworth Products FastTrac Rack Support Bracket, Black (4-Pack) - 13366-701

This FastTrac Rack Support Bracket will attach a FastTrac Cable Tray of any width to the top of racks with 1-1/2" high L-shaped top angles. One bracket is used every 5 feet of span. The material is formed 14 GA steel with black powder coat finish. It is sold in 4-packs.

Chatsworth Products FastTrac Intersect Support Plate, 12-16" Wide, Zinc Electroplated - 13357-016

A FastTrac Cable Tray (available separately) is used to create point-to-point pathways for communications cabling. The FastTrac Intersection Support Plate is the quickest way to form a 90, 45 or 22.5 degree intersection. The FastTrac Intersection Support Plate is placed over a FastTrac Center Support and the end of the tray is dropped into the pre-punched slots on the pan....

Chatsworth Products Cable Runway Triangular Support Bracket, Aluminum, 6-12", Black - 11312-712

This Cable Runway Triangular Support Bracket in Black supports cable runway width between 6 and 12 inches. Its capacity is 100 lbs. The material for the bracket is 1/4" x 2" 6063-T5 aluminum bar, and the kit consists of (1) triangular bracket, (2) 5/16-18 x 2 1/4" J-bolts, (2) 5/16-18 hex nuts and (2) 5/16 lock washers.

Chatsworth Products Triangular Support Bracket for 6" and 12" Runways, Steel, Black - 11746-712

This Triangular Support Bracket provides wall support for a cable runway. It is made of cold rolled steel with a weight capacity of 400 lbs.

Chatsworth Products FastTrac Cable Tray 4" x 4" x 10ft, Zinc Electroplated - 13343-004

This is a 4" x 4" FastTrac Cable Tray. The tray features a 10' length and a cable fill of 207 for Cat 5e cables and 138 for Cat 6 cables.FastTrac Cable Tray is used to create point-to-point pathways for network cabling. Use FastTrac under raised floors in the data center or overhead in the office space. FastTrac Cable Tray...

Chatsworth Products Triangular Support Bracket, Aluminum, White, 18in - 11312-218

This triangular support bracket is welded to provide wall support for a cable runway, it supports up to 100lbs.

Chatsworth Products Wall Angle Support Kit - 11421-1-09

This wall angle support bracket is for use with 9" cable runways. The 2" x 2" x 3/16" steel support angle is cut and drilled for wall mounting specific widths of cable runway. The kit comprises the following: (1) wall angle (size ordered), (2) 5/16-18 x 2 1/4" J-bolts, (2) 5/16-18 hex nuts, (2) 5/16 lock washers.

Chatsworth Products Triangular Cable Runway Support Bracket, Gray, 12" to 18" Wide - 11312-118

This triangular welded bracket provides wall support for cable runway.

Ordering Information

Price:

$4.07

Quantity: