Print page E-mail page

InfraStruXure System, 4-Post Rack with 4kVA Symmetra LX, 120 208V

InfraStruXure System, 4-Post Rack with 4kVA Symmetra LX, 120/208V

APC

Item #: 7929120

Mfr. Part #: ISXT24KPM1R4P

Overview

Specs

Reviews

InfraStruXure System, 4-Post Rack with 4kVA Symmetra LX, 120/208V - ISXT24KPM1R4P

Provides 3200watt(s), 120V, 208V, 4000VA power / Surge Suppression is Standard
Connector(s): Power NEMA L5-30 (F), Power NEMA 5-20 (F), Power NEMA L14-30 (F), Power Hard Wire 4-wire (2PH + N + G) / 15 Outlets
5.9 minute(s) Battery Runtime at Full Load / Attributes include Double conversion online

A four-post single rack InfraStruXure system that ships factory assembled, wired, tested and ready to roll into place. The system-level management device provides a single IP address with local and remote monitoring capabilities.

InfraStruXure System, 4-Post Rack with 4kVA Symmetra LX, 120/208V - ISXT24KPM1R4P

Connectivity
Communication Interface	Serial (RS-232)
# Ports	15
Connector	Power NEMA L5-30 (F)
Connector	Power NEMA 5-20 (F)
Connector	Power NEMA L14-30 (F)
Connector	Power Hard Wire 4-wire (2PH + N + G)
General
Attributes	Double conversion online
Form Factor	42U Rackmount
Power
Surge Suppression	Standard
Power Provided	120 V
Power Provided	208 V
Battery Average Run Time	5.9 minute(s)
Power Provided	3200 watt(s)
Power Provided	4000 VA
Actual Weight	476.00 lb(s)
Compatibility Notes	Control panel: Multi-function LCD status and control console Audible alarm: Audible and visible alarms prioritized by severity
Contents	Rack, shelf, UPS, PDU, software, documentation
Physical Dimensions	78.4"h x 20.1"w x 28.8"d
Ports/Connectors	(1) Hard Wire 4-wire (2PH + N +G) output connection (9) NEMA 5-20R outlets (2) NEMA L14-30R outlets (3) NEMA L5-20R outlets (1) Hard Wire 4-wire (2PH+N+G) input connection (1) DB-9 RS-232 serial management port (2) Smart-Slot interface port (1 available)
Power Notes	Output Configured power: 3200W/4000VA Maximum configurable power: 6400W/8000VA Nominal output voltage: 120 / 208VAC PDU type: basic PDU capacity: 20A Bypass: internal bypass (automatic and manual) Output frequency (sync to mains): 47-63Hz Output frequency (not synched): 60Hz + / - 0.1% for 60Hz nominal, 50Hz + / - 0.1% for 50Hz nominal Crest factor: up to 5:1 Waveform type: sine wave Input Nominal input voltage: 208VAC Input frequency: 45-65Hz Input voltage range for main operations: 96-138VAC (Line to Neutral) Input power factor at full load: 0.98 Batteries and Runtime Battery type: maintenance-free sealed Lead-Acid battery with suspended electrolyte Battery volt-amp-hour capacity: 863 Typical recharge time: 3 hours Typical backup time at half load: 16.9 minutes (1600W) Typical backup time at full load: 5.9 minutes (3200W)
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	2 Years
Warranty - Parts	2 Years

Related to APC InfraStruXure System, 4-Post Rack with 4kVA Symmetra LX, 120/208V - ISXT24KPM1R4P

APC InfraStruXure System, 4-Post Rack with 3kVA Smart-UPS RT, 120/208V - ISXT13KVV1R4P

This is a four-post single rack InfraStruXure system that ships factory assembled, wired, tested and ready to roll into place. A system-level management device provides a single IP address with local and remote monitoring capabilities.

APC InfraStruXure System, 4-Post Rack with Redundant 3K SmartUPS RT - ISXT33KPC1R4P

APC InfraStruXure System, 4-Post Rack with 4-Hour Runtime Redundant 3kVA SmartUPS RT, 120V - ISXT33KXRPC1R4P

APC InfraStruXure System, 2-Post Rack with 1.5kVA Smart-UPS, 120V - ISXT11KEC1R2P

This is a two-post single rack InfraStruXure system that ships factory assembled, wired, tested and ready to roll into place. A system-level management device provides a single IP address with local and remote monitoring capabilities.

APC InfraStruXure System, 2-Post Rack with 3kVA Smart-UPS, 120V - ISXT13KVC1R2P

APC NetShelter RS 4-Post Rack, PDU Adapter Brackets - AR8417

These NetShelter 4-Post Rack PDU Adapter Brackets ship with hardware and instructions.

APC InfraStruXure System 2-Post Rack with 10kVA/8kW SmartUPS RT - ISXT110KVM1R2P

On-demand architecture for Network Critical Physical Infrastructure (NCPI)

IBM Storage BladeCenter HT 4-Post Rack Mount Kit - 42C5284

This is a 4-Post Rack Mount Kit for the IBM BladeCenter HT System.

Intel Universal Slide Rail Kit 19in for 2/4 Post Rack 1U/2U - TMLPMOUNT51

The Intel TMLPMOUNT51 mount is of a rail construction, with brackets allowing installation of the product in either 2-post or 4-post racks. The rails are not free-sliding rails, and are not intended to allow the product to be accessed in an extended position. TMLPMOUNT51 is for 19 wide standard EIA (universal hole spacing) racks. This mount has been tested and...

Innovation First Third Party Rail Kit for IBM xSeries Servers x336 4-Post Racks Only - 1URAIL-IBM-336

This third-party rail kit allows you to mount IBM xSeries 1U Servers in various non-standard racks. It is compatible with the x336 standard, works with 4-post racks, supports various upright shapes such as "C", "Z", and "?" shapes and supports shallow racks without cable management. This slide rail kit replaces the IBM supplied slide rails.

Ordering Information

Price:

$10,399.00

Status:

On Order

Est. Ship:

Call for Availability

Quantity:

InfraStruXure System, 4-Post Rack with 4kVA Symmetra LX, 120 208V

Ordering Information

Hot Deals