Print page E-mail page

T92A20 Housing with High Power over Ethernet

More From: Axis Communications

Item #: 9790299

Mfr. Part#: 5015-204

Availability: On Order

Est. Ship: Call for Availability

Overview

Specs

Reviews

T92A20 Housing with High Power over Ethernet - 5015-204

AXIS T92A20 Housing is tailor-made and carefully tested to comply with Axis network cameras. This stylishly designed housing has a side opening and pre-installed High Power over Ethernet splitter for quick and easy installation. The pre-installed High Power over Ethernet splitter provides power both for the camera and for heating the housing, eliminating the need for additional power cables.

General
Product Type	Housing
Target Use	Security camera
Contents	Housing, Documentation
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	1 Year
Warranty - Parts	1 Year

Related to Axis Communications T92A20 Housing with High Power over Ethernet - 5015-204

Axis Communications T8121 High Power-over-Ethernet Midspan Unit, 1-port - 5014-004

The Axis High Power-over-Ethernet midspan gives you an easy, fast and cost-effective solution for powering your network video products -- specifically PTZ (pan/tilt/zoom) and PTZ dome network cameras -- without the need to install power outlets and electrical cabling. This unit enables Axis network video products with high power consumption (up to 20 Watts) to receive data and power over...

Axis Communications 1-port Power-over-Ethernet Midspan - 0226-004

With the use of Power over LAN Midspan and Power over LAN Active Splitter, Axis network video products can receive both data and power over a single Ethernet cable. The Power over LAN (PoL) products enable Axis network cameras and video servers to be installed in areas where traditional power cabling and outlets are unavailable or difficult to install. Power...

Zyxel Communications NWA3163 High-Powered Wireless-G Access Point Power-Over-Ethernet 400mW Output

ZyXEL NWA-3163 Business Wireless Access Point is a WLAN solution featuring 2.4GHz dual-band, 802.11b/g dual-mode and PoE (Power-over-Ethernet) capabilities designed for small to medium enterprises. It is built with LSOH (Low Smoke Zero Halogen) material and is compliant with UL2043, the so-called plenum rating, which supports installation in environmental airspaces such as areas above suspended ceilings. The NWA-3163 equipped with...

PowerDsine 1-Port Power Over Ethernet Injector AC Input, High Power Output - PD-8001/AC

The PowerDsine 8006 High Power over Ethernet (HighPoE) midspan connects to an existing Ethernet infrastructure via standard Category 5 unshielded twisted-pair and shielded cabling. This power injector can power terminals with power consumption higher than 12.95W (which is defined as the maximum by the IEEE 802.3af standard), such as Pan, Tilt, Zoom (PTZ) Network Cameras, high-end color touch screen IP...

PowerDsine Power Over Ethernet Active Splitter for 6000 Midspan Family - PD-AS-401/12-PAN

PowerDsine Power over Ethernet splitters enable easy integration of the Power over Ethernet technology into legacy equipment. This active splitter connects the PowerDsine 6000 Power over Ethernet Midspan product family (6024, 6012, 6006 and 6001 models) to several different network cameras: the Axis 2130, Canon VB-C10R, VB-C50Fi, Panasonic KX-HCM270, KX-HCM280, and the Sony SNC-RZ30P.

Zyxel Communications ES2024PWR Fully-Enabled 24-port Power-over-Ethernet Switch (L2) Layer 2 (170 watts PoE)

ZyXEL ES-2000 Series is an entry-level, managed L2 Fast Ethernet Switch, and specially designed for SMB or Campus to empower multi-tasks in today's dynamic network environment requiring capability over security, QoS and network management. Complete product portfolio with optimized port configuration, embedded dual-personality GbE ports and Power over Ethernet (PoE) can easily find solution and fit in any network very...

TRENDnet Power Over Ethernet (PoE) Splitter, 1-in/1-out, CSMA/CD - TPE-102S

The TPE-102S Power over Ethernet Splitter provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain. This splitter allows you to split one PoE source into separate power and...

D-Link Systems DWL-P200 - Power over Ethernet (PoE) Adapter

Deliver Power over Ethernet to Remote Devices.

TRENDnet Gigabit Power over Ethernet Injector - TPE-111GI

The Gigabit Power over Ethernet Injector (TPE-111GI) combines electrical power with a Gigabit network data signal to product a Gigabit PoE signal. Connect this device to a non-PoE switch and then run a Gigabit PoE cable for up to 100m to network most PoE devices. No need to buy a PoE switch use existing open ports from a non-PoE switch...

TRENDnet Power over Ethernet Injector - TPE-101I

The TPE-101I Power over Ethernet Injector provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones and Wireless Access Points. Reduce costs by using existing Cat5 cable to deliver both power and data where power source is difficult to obtain.