Print page E-mail page

Cisco Integrated 8-Port V.92 Analog Modem Network Module (NM-8AM-V2)

More From: Cisco

Item #: 4780542

Mfr. Part#: NM-8AM-V2

Availability: Limited Quantities Available

Est. Ship: Usually Ships in 48 Hrs

The Cisco Integrated V.92 analog modem network modules, combined with the differentiated services delivered through Cisco IOS Software, Cisco 2600 Series, 3660, and 3700 series routers, offer customers best-in-class scalability, flexibility, and investment protection, all in cost-effective, multifunctional platforms.

Cisco Integrated 8-Port V.92 Analog Modem Network Module (NM-8AM-V2)

Remote Management over
Warranty: N/A

The Cisco Integrated 8-Port V.92 Analog Modem Network Module (NM-8AM-V2) provides cost-effective analog telephone service connectivity for lower-density remote-access service (RAS), dial-out and fax-out modem access, asynchronous dial-on-demand routing (DDR) plus dial backup, and remote router management.

The 8-port and 16-port analog modem network modules (part numbers NM-8AM-V2 and NM-16AM-V2) are now available for the award-winning Cisco 2600 Series, 3660, and 3700 series modular router platforms. This addition expands the already extensive range of network modules and WAN interface cards (WICs) currently available for these products.

Both the 8-port and 16-port versions use RJ-11 jacks to connect the integrated modems to basic analog telephone lines on the public switched telephone network (PSTN) or private telephony systems.

Combined with Cisco 2600 Series, 3660, and 3700 series routers, the 8-port and 16-port analog modem network modules provide: scalable analog modem dialup concentration for regions without digital connectivity; centralized modem grouping for enterprise dial-out and fax-out services; on-demand dial backup for critical WAN links; a cost-effective alternative to leased lines or ISDN; an integrated solution for ease of deployment and management; and enhanced remote management capabilities.

Equipped with the new Cisco Integrated V.92 analog modem network modules, the Cisco 2600, 3660, and 3700 series routers offer the most flexible, scalable, and manageable dial access solution available on the market today.

To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to essential information, and advanced hardware replacement. To learn more, call your account manager or 1-800-800-0014 today!

Features & Functions
Error Correction Protocol	MNP-4
Error Correction Protocol	MNP-3
Error Correction Protocol	MNP-2
Modem
Modem Transfer Rate	56 Kbps
Analog Modulation Protocol	ITU V.22bis
Analog Modulation Protocol	ITU V.22
Analog Modulation Protocol	ITU V.29
Analog Modulation Protocol	ITU V.32
Analog Modulation Protocol	ITU V.32bis
Analog Modulation Protocol	ITU V.34
Analog Modulation Protocol	ITU V.90
Analog Modulation Protocol	ITU V.17
Analog Modulation Protocol	ITU V.27ter
Analog Modulation Protocol	ITU V.34bis
Analog Modulation Protocol	ITU V.92
Analog Modulation Protocol	ITU V.21
Analog Modulation Protocol	Bell 103
Analog Modulation Protocol	Bell 212A
Protocols
Data Compression Protocol	MNP-5
Actual Weight	0.80 lb(s)
Compatibility Notes	Vendor Compatible Products Cisco 2611XM, Cisco 2611XM VPN Bundle, Cisco 2620XM, Cisco 2621XM VPN Bundle, Cisco 2650XM, Cisco 2651XM VPN Bundle, Cisco 2691, Cisco 2811 Security Bundle, Cisco 2821 Security Bundle, Cisco 2851 Security Bundle, Cisco 3660, Cisco 3725, Cisco 3745, Cisco 3745 VPN Bundle, Cisco 3825 Security Bundle, Cisco 3845 Security Bundle, Cisco 3845 V3PN Bundle Features Cisco 2600 Series, 3660, and 3700 series routers, equipped with the new Cisco Integrated V.92 analog modem network modules, offer the most flexible, scalable, and manageable dial access solution available on the market today: Connection speeds up to 56 Kbps (per ITU-T V.90 specification)—When dialing out to a digital endpoint, this feature allows users to achieve maximum data transfer rates, resulting in faster file transfers, speedier Web access, and faster e-mail downloads. ITU-T V.92 Quick Connect—V.92 Quick Connect speeds the client-to-server startup negotiation, reducing the overall connect time by up to 30 percent. The client modem retains line condition information and characteristics of the connection to the digital endpoint, which reduces connect time by avoiding some of the initial signal handshaking. ITU-T V.44 compression—V.44 LZJH is a new compression standard based on Lempel-Ziv. It uses a new string-matching algorithm that increases upload and download speeds to make Internet access and Web browsing faster. The V.44 call success rate (CSR) is similar to V.42bis with significant compression improvement for most file types, including HTML files. V.44 applies more millions of instructions per second than V.42bis toward the same application data stream, and yields better compression rates in almost any data stream in which V.42bis shows positive results. For a complete list of benefits, features, etc. please go to: link
Contents	Unit, documentation
Physical Dimensions	1.6"h x 7.1"w x 7.2"w
Ports/Connectors	(8) Eight RJ-11 ports. (8) RJ-11 cables needed but not provided.
Returns Policy	Due to manufacturer restrictions, all sales on this item are final.
System Requirements	Memory and Software Requirements: The minimum software requirement for all supported platforms is Cisco IOS Software Release 12.3(4)XD. Supported in all feature sets No additional memory is required to support a single Cisco Integrated V.92 Analog Modem Network Module (8-port or 16-port) per chassis. Additional memory may be required as the number of modules per chassis increases or as additional features are enabled. (see the Cisco IOS Software release notes for platform memory requirements per feature set)
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Cisco Integrated 8-Port V.92 Analog Modem Network Module (NM-8AM-V2)

Cisco Refurb. Integrated 8-Port V.92 Analog Modem Network Module - NM-8AM-RF

The NM-8AM analog modem network modules provide 8 internal V.34 analog modems. These Microcom modems support speeds up to 33.6 kbps. Each port is an RJ-11 jack and needs individual RJ-11 cables to connect to the telephone network.

Cisco 16-Port Analog Modem Network Module (NM-16AM-V2)

Analog modem network modules originate or terminate analog telephone transmissions through RJ-11 modular jacks.This module supports the following protocols: All standard data rates from 300 bps to 33.6 kbps (V.34 bis), V.42bis and Microcom Network Protocol (MNP) 5 data compression, V.42, Link Access Procedure for Modems (LAPM), and MNP 2 to 4 error correction, MNP10 for high performance under all...

Cisco 16-Port Async/Sync Serial Network Module (NM-16A/S) - NM-16A/S=

Extend the usefulness of your Cisco hardware and software products by installing theSixteen-Port Asynchronous/Synchronous Serial Network Module (NM-16A/S) in your system.

Cisco 1-Port T3/E3 ATM Network Module - NM-1A-T3/E3=

This 1-port ATM T3/E3 network module fits the Cisco 2811, 2821, 2851, and 3800 series appliance.

Cisco One-slot IP Communications Voice/Fax Network Module (NM-HD-1V)

The most versatile combination of analog and digital voice and data capabilities in a single network module.

Cisco Refurb. Cisco EtherSwitch Network Module (NM) - 16 port(s) NM-16ESW - NM-16ESW-RF

The Cisco EtherSwitch Network Module (NM) has sixteen 10/100 switched Ethernet ports, with options for in-line power and a single Gigabit Ethernet port. The 16-port Cisco EtherSwitch NM is a modular, high-density network module that provides line-rate Layer 2 switching across Ethernet ports using Cisco IOS Catalyst Software. Expected features such as port autosensing, QoS and VLAN support from 802.1P...

Cisco 1/2 Port Channelized T1/E1 PRI (2-port) Network Module (NM-2CE1T1-PRI)

The Cisco 1/2 Port Channelized T1/E1 PRI (2-port) Network Module (NM-2CE1T1-PRI) provides support for T1, E1, and ISDN primary rate interface (PRI) network connections in a network module form factor. This feature offers attachment of two T1, E1, or ISDN PRI lines.The (NM-2CE1T1-PRI) enables you to configure a single network module as either a T1 interface or an E1 interface...

Cisco EtherSwitch Network Module (NM) (16) Ports - NM-16ESW=

Cisco 10/100 Ethernet 2 WAN Card Slot Network Module - NM-1FE2W-V2=

For the Cisco 3660 modular access router, this 2-slot network module provides one 100BaseT Fast Ethernet interface, plus two slots for optional WAN interface cards.To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to essential information, and advanced hardware replacement. To learn more, call your account manager or...

Cisco Two-slot IP Communications Voice/fax Network Module NM-HD-2VE

The voice functionality built into Cisco IOS software enables modular access routers to carry voice traffic, such as telephone calls and faxes, as Voice over IP (VoIP) simultaneously with data traffic over LANs, MANs, and WANs. Voice network modules convert telephone voice signals into a form that can be transmitted over an IP network. Voice network modules convert telephone voice...