4-Pair G.SHDSL HWIC module with IMA support

G.SHDSL HWICs are modules that enable high-speed Internet and intranet access. They can be inserted into the HWIC slots on Cisco access router platforms such as the Cisco 1841 and Cisco 2800 and 3800 Series Integrated Services Routers. To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to...

This is a Cisco 2811 SHDSL Bundle with IOS SP Services, WIC-1SHDSL-V2 (2 or 4 Wire) and 64MB Flash/256MB DRAM.

The 2-pair G.SHDSL HWIC provides two ports of 2-wire or one port of 4-wire connectivity options. These cards are supported in all integrated services routers that have HWIC slots. The 2-pair G.SHDSL HWICs supersede the existing G.SHDSL WAN Interface Card (part number WIC-1SHDSL-V3), which is a WIC-based G.SHDSL solution. The G.SHDSL HWICs provides higher performance and increased reach when compared...

This 2811 2-pair G.SHDSL router bundle includes Cisco IOS SP Services software. It has a DSL modem and boasts transfer rates up to 2.304Mbps. It features firewall protection, hardware encryption, power over Ethernet (PoE) support, MPLS support, VLAN support, and URL filtering.

The Cisco CWDM OADMs are passive devices that provide the ability to multiplex and demultiplex, or add and drop wavelengths from multiple fibers onto one fiber. The OADM connectors are interfaced to the color-matching Cisco CWDM SFPs on the equipment side. All modules are the same size. The Cisco CWDM chassis enables rack mounting for up to two Cisco CWDM...

The Cisco CWDM OADMs are passive devices that provide the ability to multiplex and demultiplex, or add and drop wavelengths from multiple fibers onto one fiber. The OADM connectors are interfaced to the color-matching Cisco CWDM SFPs on the equipment side. All modules are the same size. The Cisco CWDM chassis enables rack mounting for up to two Cisco CWDM...

The HP Procurve Switch XL Module is a component that you can add to an HP Procurve XL switch to provide network connectivity options. This module features 4 slots for installing any of the supported HP Procurve mini-GBICs.

The 110 Punch Down Cutting Tool is for punching down 4-pair UTP 24 AWG cable onto terminal blocks. With a comfort-grip rubber handle, It punches and cuts in one motion and reduces time and fatigue by punching down 4-pairs at once.

This is a 10-pack of connecting blocks that can be terminated to wiring blocks using an impact tool. The block features insulation displacement contacts (IDC) in a 4-pair configuration. The blocks are end-to-end stackable at a constant pitch. They accept discrete wire or 110-type patch cords. Pair splitters are marked with color-codes.

This is a pack of 4-pairs Twist Crimp Tool-Less Speaker Cable Connectors with Gold Pin. The OmniFlex connector allows bending and flexing in all directions for easy installation, and the special Lock-Notch design will not pull out of push-pin terminal connections. Its innovative design fits components with a high quality connection. These connectors will fit 16 guage conductors.