HP ProLiant DL180 G6 Xeon QC E5520 2.26GHz(x1)/8MB L3/6GB/12x3.5" SAS/SATA HS/GigNIC - 487508-001
- Intel 2.26GHz Xeon QC E5520 / Upgradable / 1 processor(s) installed / 2 processor(s) supported
- 6GB installed RAM / Technology is DDR3 SDRAM / 24GB maximum / 8MB installed cache
- No Operating System Installed / 2U Rackmount / Supports Gigabit Ethernet Networking
The DL180 G6 is a low cost high capacity storage optimized 2-way server, that delivers on a history of design excellence and 2U density for a variety of rack deployments and applications. Featuring an array of new innovations and features which sets it apart from other ProLiant servers and the competition. The new 2U chassis is designed with growth in mind.
HP ProLiant DL180 G6 Xeon QC E5520 2.26GHz(x1)/8MB L3/6GB/12x3.5" SAS/SATA HS/GigNIC - 487508-001
|
General
|
|
|
Chassis Form Factor
|
2U Rackmount
|
|
Memory
|
|
|
RAM Technology
|
DDR3 SDRAM
|
|
Cache Memory (installed)
|
8 MB
|
|
RAM (installed)
|
6 GB
|
|
RAM (max)
|
24 GB
|
|
Operating System
|
|
|
OS Provided
|
No Operating System Installed
|
|
Optical Drive Information
|
|
|
CD/DVD Type
|
No Optical Drive
|
|
Processor
|
|
|
Data Bus Speed
|
1066 MHz
|
|
Chipset Type
|
Intel 5520
|
|
# Processors Installed
|
1
|
|
# Processors Supported
|
2
|
|
Processor Manufacturer
|
Intel
|
|
Processor Model Number
|
E5520
|
|
Processor Type
|
Xeon QC
|
|
Processor Upgradability
|
Upgradable
|
|
Processor Speed
|
2.26 GHz
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Storage Controller RAID Level
|
RAID 0
|
|
Storage Controller RAID Level
|
RAID 1
|
|
Storage Controller RAID Level
|
RAID 1+0
|
|
Storage Controller RAID Level
|
RAID 5
|
|
Storage Controller RAID Level
|
RAID 5+0
|
|
Floppy Type
|
No Floppy Drive
|
|
Hard Drive Type
|
Hot-swap
|
|
Storage Controller Type
|
HP Smart Array P212
|
|
Video
|
|
|
Video RAM (installed)
|
0 MB
|
|
External Resolution (max)
|
1280 x 1024
|
|
Video Card
|
Integrated
|
|
Actual Weight
|
45.00 lb(s)
|
|
Compatibility Notes
|
Processor: Intel Xeon Processor E5520 (2.26GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1 / 1 / 2 / 2)
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
|
|
Contents
|
Server, documentation
|
|
Memory Notes
|
6GB PC3-10600 unbuffered ECC UDIMM, expandable to 24GB.
There are twelve (12) memory slots. Three are occupied by removable 2GB modules.
Memory notes:
For servers with twelve (12) memory slots
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1, 4; 2, 5; 3;6 on a 3DPC system or 1, 4; 2, 5; on a 2DPC system
No mixing DIMM voltage; all DIMMs must be the same voltage
Mfr. # 500668-B21 - PCC Item # 9680479 - 1GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. # 500670-B21 - PCC Item # 9682811 - 2GB PC3-10600 DDR3 SDRAM Upgrade Kit
Video Memory: 32MB shared
|
|
O/S Notes
|
No operating system is pre-installed.
Supported operating systems include:
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris 10 for x86 / x64 based Systems)
Citrix Essentials for XenServer (Retail)
|
|
Physical Dimensions
|
3.44"h x 17.64"w x 28.2"d
|
|
Ports/Connectors
|
Expansion slots: (1) Low Profile x16 PCI-Express slot using a Low profile Riser, (2) Full Height / Full Length Riser options:
Option 1: 2 x8 full-length / full-height PCI-Express slots (Standard)
Option 2: 2 PCI-X, full-length / full-height riser Slots(Optional)
Option 3: 1 x16 full-length / full-height slot (Optional)
Expansion bays: (12) 3.5" SAS / SATA hot swap, (1) Optical
NOTE: This is a 12 drive hot plug SAS or SATA model. Internal Storage expandable to 14 SAS / SATA drives with 2 Rear Drive Option Kit (488234-B21, PCC # 9695208)
Storage Controller: HP Smart Array P212 /256MB Controller (RAID 0 / 1 / 1+0 / 5 / 5+0)
NOTE: A minimum of 256MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade (P / N: 516471-B21 PCC # 9884623) is required to enable RAID 6, 6+0
I/O:
(2) RJ-45
(1) Serial
(1) Graphics
(5) USB 2.0 (2 front, 2 rear, 1 internal optional)
(optional port kit for remote management 516006-B21, PCC item # 9694803)
|
|
Power Notes
|
Power Supply: (1) 750W common slot, high efficiency power supply
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
HP ProLiant DL180 G6 Xeon QC E5520 2.26GHz(x1)/8MB L3/6GB/12x3.5" SAS/SATA HS/GigNIC - 487508-001
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=9751741#BVSecondaryCustomerRatings