HP ProLiant DL180 G6 Xeon QC L5520 2.26GHz(x1)/8MB/4GB/160GB 3.5" SATA NHP/GigNIC - 487506-001
- Intel 2.26GHz Xeon QC LV L5520 / Upgradable / 1 processor(s) installed / 2 processor(s) supported
- 4GB installed RAM / Technology is DDR3 SDRAM / 24GB maximum / 8MB installed cache / 160GB Hot-swap hard drive
- No Operating System Installed / 2U Rackmount / Supports Gigabit Ethernet Networking
The DL180 G6 is a low cost high capacity storage optimized 2-way server, that delivers on a history of design excellence and 2U density for a variety of rack deployments and applications. Featuring an array of new innovations and features which sets it apart from other ProLiant servers and the competition. The new 2U chassis is designed with growth in mind.
HP ProLiant DL180 G6 Xeon QC L5520 2.26GHz(x1)/8MB/4GB/160GB 3.5" SATA NHP/GigNIC - 487506-001
|
General
|
|
|
Chassis Form Factor
|
2U Rackmount
|
|
Memory
|
|
|
RAM Technology
|
DDR3 SDRAM
|
|
Cache Memory (installed)
|
8 MB
|
|
RAM (installed)
|
4 GB
|
|
RAM (max)
|
24 GB
|
|
Operating System
|
|
|
OS Provided
|
No Operating System Installed
|
|
Optical Drive Information
|
|
|
CD/DVD Type
|
No Optical Drive
|
|
Processor
|
|
|
Chipset Type
|
Intel 5520
|
|
# Processors Installed
|
1
|
|
# Processors Supported
|
2
|
|
Processor Manufacturer
|
Intel
|
|
Processor Model Number
|
L5520
|
|
Processor Type
|
Xeon QC LV
|
|
Processor Upgradability
|
Upgradable
|
|
Processor Speed
|
2.26 GHz
|
|
Data Bus Speed
|
1066 MHz
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Hard Drive Type
|
Hot-swap
|
|
Hard Drive Capacity
|
160 GB
|
|
Storage Controller RAID Level
|
RAID 0
|
|
Storage Controller RAID Level
|
RAID 1
|
|
Storage Controller RAID Level
|
RAID 10
|
|
Storage Controller Type
|
SATA
|
|
Floppy Type
|
No Floppy Drive
|
|
Video
|
|
|
Video RAM (installed)
|
0 MB
|
|
Video Card
|
Integrated
|
|
External Resolution (max)
|
1280 x 1024
|
|
Actual Weight
|
45.00 lb(s)
|
|
Compatibility Notes
|
Processor: Intel Xeon Processor L5520 (2.26GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1 / 1 / 2 / 2)
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
|
|
Contents
|
Server, documentation
|
|
Memory Notes
|
4GB PC3-10600 unbuffered ECC UDIMM, expandable to 24GB.
There are twelve (12) memory slots. Two are occupied by removable 2GB modules.
Memory notes:
For servers with twelve (12) memory slots
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1, 4; 2, 5; 3;6 on a 3DPC system or 1, 4; 2, 5; on a 2DPC system
No mixing DIMM voltage; all DIMMs must be the same voltage
Mfr. # 500668-B21 - PCC Item # 9680479 - 1GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. # 500670-B21 - PCC Item # 9682811 - 2GB PC3-10600 DDR3 SDRAM Upgrade Kit
Video Memory: 32MB shared
|
|
O/S Notes
|
No operating system is pre-installed.
Supported operating systems include:
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris 10 for x86 / x64 based Systems)
Citrix Essentials for XenServer (Retail)
|
|
Physical Dimensions
|
3.44"h x 17.64"w x 28.2"d
|
|
Ports/Connectors
|
Expansion slots: (1) Low Profile x16 PCI-Express slot using a Low profile Riser, (2) Full Height / Full Length Riser options:
Option1: 2 x8 full-length / full-height PCI-Express slots (Standard)
Option2: 2 PCI-X, full-length / full-height riser Slots(Optional)
Option 3: 1 x16 full-length / full-height slot (Optional)
Expansion bays: (4) 3.5" SAS / SATA non-hot swap, (1) Optical
This model is configured with (1) 160GB hot swap SATA hard disk drive but see note below.
NOTE: This is a 4 drive non-hot plug SATA model. Hot-plug functionality requires the addition of a Smart Array controller.
NOTE: Upgrading from 4 Non-Hot Plug SATA hard drives to 4 Hot Plug SATA/SAS hard drives requires the addition of a storage controller and one Internal mini-SAS cable (496005-B21).
NOTE: Upgrading to 8 Hot Plug SATA/SAS hard drives requires the addition of a HP 2U G6 8HDD LFF DL18X KIT (506924-B21), storage controller (Smart Array P410 / 256MB recommended), and two Internal SATA/SAS cables (mini-SAS cable (496005-B21), mini-SAS cable (532162-B21).
Storage Controller: Embedded SATA Raid Standard RAID 0, 1, 10
I/O:
(2) RJ-45
(1) Serial
(1) Graphics
(5) USB 2.0 (2 front, 2 rear, 1 internal optional)
(optional port kit for remote management 516006-B21, PCC item # 9694803)
|
|
Power Notes
|
Power Supply: (1) 460W common slot, high efficiency power supply
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
3 Years
|
|
Warranty Details
|
Server Warranty includes 3-Years Next Business Day Parts replacement, 0-Years Labor, 0-Years Onsite support.
|
HP ProLiant DL180 G6 Xeon QC L5520 2.26GHz(x1)/8MB/4GB/160GB 3.5" SATA NHP/GigNIC - 487506-001
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=9738589#BVSecondaryCustomerRatings