HP ProLiant BL460c G6 Server Blade Xeon QC L5520 2.26GHz(x1)/8MBL3/6GB/Open Bay SFF HS SAS SATA/GNIC - 507781-B21
- Intel 2.26GHz Xeon QC LV L5520 / Upgradable / 1 processor(s) installed / 2 processor(s) supported
- 6GB installed RAM / Technology is DDR3 SDRAM / 192GB maximum / 8MB installed cache / 0GB Hot-swap hard drive
- No Operating System Installed / Blade / supports Gigabit Ethernet networking
As the world's most popular blade server, the HP ProLiant BL460c Server Blade sets the standard for the data center. Packing two processors, two hot-plug hard drives, up to 96 GB of memory, and a dual-port 10 gigabit ethernet adapter into a half-height blade, the BL460c gives IT managers the performance and expandability they need for demanding data center appliations.
HP ProLiant BL460c G6 Server Blade Xeon QC L5520 2.26GHz(x1)/8MBL3/6GB/Open Bay SFF HS SAS SATA/GNIC - 507781-B21
|
General
|
|
|
Chassis Form Factor
|
Blade
|
|
Memory
|
|
|
RAM Technology
|
DDR3 SDRAM
|
|
Cache Memory (installed)
|
8 MB
|
|
RAM (installed)
|
6 GB
|
|
RAM (max)
|
192 GB
|
|
Operating System
|
|
|
OS Provided
|
No Operating System Installed
|
|
Optical Drive Information
|
|
|
CD/DVD Type
|
No Optical Drive
|
|
Processor
|
|
|
Data Bus Speed
|
1066 MHz
|
|
# Processors Installed
|
1
|
|
# Processors Supported
|
2
|
|
Processor Model Number
|
L5520
|
|
Processor Type
|
Xeon QC LV
|
|
Processor Manufacturer
|
Intel
|
|
Processor Upgradability
|
Upgradable
|
|
Chipset Type
|
Intel 5500
|
|
Processor Speed
|
2.26 GHz
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Hard Drive Capacity
|
0 GB
|
|
Storage Controller RAID Level
|
RAID 0
|
|
Storage Controller RAID Level
|
RAID 1
|
|
Storage Controller Type
|
Smart Array P410i
|
|
Hard Drive Type
|
Hot-swap
|
|
Video
|
|
|
Video RAM (installed)
|
32 MB
|
|
Video Card
|
ATI RN50
|
|
External Resolution (max)
|
1600 x 1280
|
|
Actual Weight
|
14.20 lb(s)
|
|
Compatibility Notes
|
Form Factor: HP ProLiant BL460c G6 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures.
Processor: Intel Xeon Processor L5520 (2.26GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1 / 1 / 2 / 2)
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
Processor performance: "L" denotes Lower Wattage.
|
|
Contents
|
Server blade, software, documentation
|
|
Memory Notes
|
6GB PC3-10600 DDR3 1333MHz registered DIMMs, expandable to 192GB.
There are twelve (12) DIMM Slots. Three are occupied by removable 2GB modules, the others are available.
Summarized memory notes:
For the HP ProLiant BL460c G6 server with twelve (12) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots.
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs).
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1, 4; 2, 5; 3;6 on a 3DPC system or 1, 4; 2, 5; on a 2DPC system
No mixing DIMM voltage; all DIMMs must be the same voltage
Mfr. Part# 500656-B21 - PCC Item# 9661155 - 2GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 500658-B21 - PCC Item# 9678951 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 500660-B21 - PCC Item# 9648137 - 4GB PC3-8500 DDR3 SDRAM Low Power Upgrade Kit
Mfr. Part# 516423-B21 - PCC Item# 9661649 - 8GB PC3-8500 DDR3 SDRAM Upgrade Kit
Video memory: 32MB DDR memory
|
|
O/S Notes
|
There is no operating system pre-installed.
Supports Windows, RHEL, SLES, OEL, Solaris, NetWare, VMware, and Citrix XenServer
|
|
Physical Dimensions
|
7.2"h x 2.2"w x 20.1"d
|
|
Ports/Connectors
|
Expansion slots total(free): 2(2) Mezzanine slots (x8 PCI Express)
Expansion bays total(free): 2(2) 2.5" SFF SAS / SATA Hot-swap
Storage controller: HP Smart Array P410i Controller (RAID 0 / 1)
Maximum internal storage:
Hot Plug SAS: 600GB (2) 300GB Serial SCSI
Hot Plug SATA: 500GB (2) 250GB Serial ATA
I/O:
(1) Management HP iLO RJ-45
(2) RJ-45
(1) Video
|
|
Power Notes
|
Processor: 60 Watts
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
3 Years
|
|
Warranty - Parts
|
3 Years
|
|
Warranty Details
|
Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
|
HP ProLiant BL460c G6 Server Blade Xeon QC L5520 2.26GHz(x1)/8MBL3/6GB/Open Bay SFF HS SAS SATA/GNIC - 507781-B21
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=9695179#BVSecondaryCustomerRatings