HP ProLiant BL490c G6 Server Blade Xeon QC E5540 2.53GHz(x1)/8MBL3/6GB/OpenBay 2xSSD SATA NHP/GigNIC - 509315-B21
- Intel 2.53GHz Xeon QC E5540 / Upgradable / 1 processor(s) installed / 2 processor(s) supported
- 6GB installed RAM / Technology is DDR3 SDRAM / 144GB maximum / 8MB installed cache
- No Operating System Installed / Blade / supports Gigabit Ethernet networking
The HP ProLiant BL490c Virtualization Blade raises the bar for memory capacity and I/O bandwidth in a half-height blade. Coupling up to 2 Intel Xeon processors with 18 DIMM slots and support for up to 24 NICs, the BL490c gives enterprise data center managers the ideal server platform for hosting virtual machines.
HP ProLiant BL490c G6 Server Blade Xeon QC E5540 2.53GHz(x1)/8MBL3/6GB/OpenBay 2xSSD SATA NHP/GigNIC - 509315-B21
|
General
|
|
|
Chassis Form Factor
|
Blade
|
|
Memory
|
|
|
Cache Memory (installed)
|
8 MB
|
|
RAM (installed)
|
6 GB
|
|
RAM (max)
|
144 GB
|
|
RAM Technology
|
DDR3 SDRAM
|
|
Operating System
|
|
|
OS Provided
|
No Operating System Installed
|
|
Optical Drive Information
|
|
|
CD/DVD Type
|
No Optical Drive
|
|
Processor
|
|
|
Chipset Type
|
Intel 5500
|
|
Data Bus Speed
|
1066 MHz
|
|
# Processors Installed
|
1
|
|
# Processors Supported
|
2
|
|
Processor Manufacturer
|
Intel
|
|
Processor Model Number
|
E5540
|
|
Processor Speed
|
2.53 GHz
|
|
Processor Type
|
Xeon QC
|
|
Processor Upgradability
|
Upgradable
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Hard Drive Interface
|
SATA
|
|
Hard Drive Type
|
Solid State Drive
|
|
Storage Controller Type
|
SATA
|
|
Video
|
|
|
External Resolution (max)
|
1600 x 1280
|
|
Video Card
|
ATI RN50
|
|
Video RAM (installed)
|
32 MB
|
|
Actual Weight
|
14.20 lb(s)
|
|
Compatibility Notes
|
The HP ProLiant BL490c G6 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures.
Processor: Intel Xeon Processor E5540 (2.53GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1 / 1 / 2 / 2)
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 core active.
|
|
Contents
|
Server blade, documentation
|
|
Memory Notes
|
6GB PC3-10600 (DDR3-1333) Registered DIMMs, expandable to 144GB.
There are eighteen (18) DIMM slots. Three are occupied by removable 2GB modules, the others are available. To achieve maximum memory, the original chips MUST be replaced.
Memory notes:
For the BL490c G6 server with eighteen (18) memory slots:
- There are three (3) channels per processor; six (6) channels per server
- There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
- Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
- Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1, 4; 2, 5; 3;6 on a 3DPC system or 1, 4; 2, 5; on a 2DPC system
No mixing DIMM voltage; all DIMMs must be the same voltage
Mfr. Part# 500656-B21 - PCC Item# 9661155 - 2GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 500658-B21 - PCC Item# 9678951 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 500660-B21 - PCC Item# 9648137 - 4GB PC3-8500 DDR3 LP SDRAM Upgrade Kit
Mfr. Part# 516423-B21 - PCC Item# 9661649 - 8GB PC3-8500 DDR3 SDRAM Upgrade Kit
Video memory: 32MB DDR1 memory
|
|
O/S Notes
|
There is no operating system pre-installed. Operating systems supported include:
Supports Windows, RHEL, SLES, OEL, Solaris, VMware, and Citrix XenServer
|
|
Physical Dimensions
|
7.2"h x 2.2"w x 20.1"d
|
|
Ports/Connectors
|
Expansion slots: (2) I/O expansion mezzanine slots (x8 PCI Express)
Expansion bays: (2) Non-Hot Plug SATA SSD internal drive bays
Storage Controller HP Embedded SATA Controller for connecting to non-hot-plug SATA SSD only
I/O:
(2) Port Flex-10 10GbE Multifunction Server Adapter
(1) 10 / 100 NIC dedicated to iLO 2 Management
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
3 Years
|
|
Warranty - Parts
|
3 Years
|
HP ProLiant BL490c G6 Server Blade Xeon QC E5540 2.53GHz(x1)/8MBL3/6GB/OpenBay 2xSSD SATA NHP/GigNIC - 509315-B21
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=9666378#BVSecondaryCustomerRatings