Print page E-mail page

UPS Network Management Card 2 with Environmental Monitoring

More From: APC

Item #: 9681720

Mfr. Part#: AP9631

Availability: In Stock

Est. Ship: Ships Today

Network enable your APC UPS to enhance manageability.

Overview

Specs

Reviews

UPS Network Management Card 2 with Environmental Monitoring - AP9631

This APC UPS Network Management Card allows for secure monitoring and control of an individual APC UPS via web browser, command line interface, or SNMP. Embedded technology provides exceptional reliability with notification features that inform you of problems as they occur. For protected servers, the included PowerChute Network Shutdown software provides graceful, unattended shutdown in the event of an extended power outage, always keeping business information safe.

This card with environmental monitoring support allows you to connect temperature sensors, temperature/humidity sensors, or relay input/output connectors that support two input contacts and one output relay. NOTE: Relay input/output connectors are not supported in firmware version 5.0.0. See the Software/Firmware page of the APC Web site, www.apc.com/tools/download, to download a firmware upgrade that supports this feature.

General
Product Type	Network management card
Actual Weight	0.20 lb(s)
Compatibility Notes	Features Provides UPS control and self-test scheduling features Provides data and event logs Provides support for the APC PowerChute Network Shutdown utility Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol (BOOTP) server to provide the network (TCP / IP) values of the Management Card Supports using the APC Remote Monitoring Service (RMS) Enables you to configure notification through event logging (by the Management Card and Syslog), e-mail, and SNMP traps. You can configure notification for single events or groups of events, based on the severity level or category of events Provides the ability to export a user configuration (.ini) file from a configured card to one or more unconfigured cards without converting the file to a binary file Provides a selection of security protocols for authentication and encrypt Provides two USB ports Supports two universal input / output ports, to which you can connect: Temperature or temperature / humidity sensors; relay input / output connectors that support two input contacts and one output relay The Management Card can be installed in the following APC devices: Any Smart-UPS model that has an internal expansion slot, or any Symmetra UPS except the Symmetra PX 250 or Symmetra PX 550 UPS Expansion Chassis (AP9600, available separately) Triple Expansion Chassis (AP9604, available separately)
Contents	Unit, CD with software, documentation
Physical Dimensions	1.5"h x 4.75"w x 4.5"d
Ports/Connectors	(1) RJ-45 10 / 100 Base-T connector (2) Sensor ports (2) USB ports (1) Serial configuration port
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	2 Years
Warranty - Parts	2 Years

Related to APC UPS Network Management Card 2 with Environmental Monitoring - AP9631

APC UPS Network Management Card with Environmental Monitoring and Out of Band Management - AP9618

APC? s UPS Network Management Cards provide management of an individual UPS by connecting the UPS directly to the network with a dedicated IP address, avoiding the need for a proxy such as a server. Embedded technology provides exceptional reliability and enables the UPS to reboot hung equipment. Manage each APC UPS individually via web browser, Telnet, SNMP or via...

APC UPS Network Management Card 2 - AP9630

Network enable your APC UPS to enhance manageability.

Eaton Network Management Card MiniSlot 2006 Edition - 66102

The MGE Network Management Card is recommended for central UPS systems that protect a complete network or for UPS systems providing back-up for critical equipment. With its embedded card, the UPS has its own IP address with local intelligence to access Web pages with reports, settings and alarms, interface with SNMP-based network management consoles and communicate with shutdown software installed...

APC Modem Environmental Monitor Upgrade Kit for AP9617 - AP9618U

This Modem/Environmental Monitor Upgrade Kit for AP9617 features: dry contact inputs, environmental monitoring, out-of-band management and simple installation.APC? s UPS Network Management Cards provide management of an individual UPS by connecting the UPS directly to the network with a dedicated IP address, avoiding the need for a proxy such as a server. Embedded technology provides exceptional reliability and enables the...

Eaton Environmental Sensor for Network Management Card NMC - 66846

The Environment Sensor supervises remotely two parameters: temperature level and humidity rate. Two input contacts are available for additional supervision: door opening and genset start-up. Remote supervision is achieved though a simple web browser or an SNMP-based NMS (Network Management System). Alarm thresholds are set easily through the web interface of the Network Management Cards. Alarms can be sent to...

Eaton ConnectUPS Minislot Network Management Card - 103006826

Using the ConnectUPS Adapter for communication with UPS you can quickly determine if there is a power-related problem anywhere on the network. This virtually eliminates costly downtime due to unexpected power outages or surges, and reduces day-to-day network management annoyances such as spontaneous rebooting, lost files and corrupted data that can result from inconsistent power.The ConnectUPS Adapter allows the monitoring...

ProximVision Standard Wireless Network Management Device, 2 Ports, 25 Nodes - 200025

Want to have complete visibility into your wireless network? Now you can. From one integrated easy-to-use console, ProximVision gives you complete control over your wireless network. Easy to use, ProximVision is a powerful tool to plan, deploy, manage and secure wireless networks. From a central location, this user-friendly application enables end-to-end management of your wireless network - even a global...

Nortel Networks 10Gbps Switch Fabric Card 2 (SFC 2). Requires s/w R4.x or higher - NTJT20FA

This Switch Fabric Card 2 operates at 10 Gigabit speeds, and requires software R4.x or higher.

SMC Networks TigerSwitch 8-Port 10/100 Managed Switch + 2 SFP, 1U - SMC6110L2

The SMC6110L2 provides wire speed 10/100 Fast Ethernet switching with features specifically designed for smaller SMB workgroup environments. The switch has 2 built-in Gigabit ports, providing enhanced uplink capabilities. The IP clustering function allows customers to group together up to 32 switches into a single logical group which can be managed using a single IP address. The switch features advanced...

SMC Networks EZ Card 10/100/1000Mbps PCI - SMC9452TX-2

The EZ Card 1000 is a high performance 32-bit 10/100/1000 Mbps copper Gigabit PCI interface card designed for network connectivity for home or office use. SMC9452TX-2 offers 10/100/1000 Mbps auto-configuration, cross-over detection, auto correction, and full duplex support to maximize the network's potential speed while accommodating the existing infrastructure. SMC9452TX-2's advanced features such as TCP and UDP Checksum Offload, Flow...