HP SmartBuy ProLiant ML370 G6 Tower Xeon QC E5530 2.40GHz(x1)/8MB/6GB/OpnBay 2.5"SAS HS/DVD/GNIC/RPS - 519578-005
- Intel 2.4GHz Xeon QC E5530 / Upgradable / 1 processor(s) installed / 2 processor(s) supported
- 6GB installed RAM / Technology is DDR3 SDRAM / 144GB maximum / 8MB installed cache / 0GB Hot-swap hard drive
- No Operating System Installed / Tower / Supports Gigabit Ethernet Networking
The next generation of the HP ProLiant ML370 G6 provides dual-processor compute power in a convenient, 4U expandable tower chassis designed for businesses who want enterprise class features and performance. The HP ProLiant ML370 G6 has been optimized for virtualization and consolidation environments, it is well-suited for deployment in growing businesses, remote office sites, or datacenters.
HP SmartBuy ProLiant ML370 G6 Tower Xeon QC E5530 2.40GHz(x1)/8MB/6GB/OpnBay 2.5"SAS HS/DVD/GNIC/RPS - 519578-005
|
General
|
|
|
Chassis Form Factor
|
Tower
|
|
Memory
|
|
|
Cache Memory (installed)
|
8 MB
|
|
RAM (installed)
|
6 GB
|
|
RAM (max)
|
144 GB
|
|
RAM Technology
|
DDR3 SDRAM
|
|
Operating System
|
|
|
OS Provided
|
No Operating System Installed
|
|
Optical Drive Information
|
|
|
CD/DVD Type
|
DVD-ROM
|
|
Processor
|
|
|
Chipset Type
|
Intel 5520
|
|
Processor Manufacturer
|
Intel
|
|
Processor Model Number
|
E5530
|
|
Processor Speed
|
2.4 GHz
|
|
Processor Type
|
Xeon QC
|
|
Processor Upgradability
|
Upgradable
|
|
# Processors Installed
|
1
|
|
# Processors Supported
|
2
|
|
Data Bus Speed
|
1066 MHz
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Floppy Type
|
No Floppy Drive
|
|
Hard Drive Capacity
|
0 GB
|
|
Hard Drive Interface
|
Serial Attach SCSI (SAS)
|
|
Hard Drive Type
|
Hot-swap
|
|
Storage Controller RAID Level
|
RAID 5
|
|
Storage Controller RAID Level
|
RAID 1+0
|
|
Storage Controller RAID Level
|
RAID 0
|
|
Storage Controller RAID Level
|
RAID 1
|
|
Storage Controller RAID Level
|
RAID 5+0
|
|
Storage Controller Type
|
Smart Array P410i
|
|
Video
|
|
|
Video Card
|
ATI RN50
|
|
Video RAM (installed)
|
64 MB
|
|
Video Slot Type
|
PCI Express 2.0 x16
|
|
External Resolution (max)
|
1600 x 1200
|
|
Actual Weight
|
77.10 lb(s)
|
|
Compatibility Notes
|
Processor: Intel Xeon Processor E5530 (2.40 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1 / 1 / 2 / 2)
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
|
|
Contents
|
Server, documentation
|
|
Memory Notes
|
6GB PC3-10600 (DDR3-1333) Registered DIMMs, expandable to 144GB.
There are 18 memory slots. Three are occupied by removable 2GB modules, the others are available. To achieve maximum memory, the original chips MUST be replaced.
Memory notes:
For servers with eighteen (18) memory slots:
- There are three (3) channels per processor; six (6) channels per server
- There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
- Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
- Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1, 4; 2, 5; 3;6 on a 3DPC system or 1, 4; 2, 5; on a 2DPC system
No mixing DIMM voltage; all DIMMs must be the same voltage
Mfr. Part# 500656-B21 - PCC Item# 9661155 - 2GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 500658-B21 - PCC Item# 9678951 - 4GB PC3-10600 DDR3 SDRAM Upgrade
Mfr. Part# 500660-B21 - PCC Item# 9648137 - 4GB PC3-8500 DDR3 LP SDRAM Upgrade Kit
Mfr. Part# 516423-B21 - PCC Item# 9661649 - 8GB PC3-8500 DDR3 SDRAM Upgrade Kit
Video memory: 64MB
|
|
O/S Notes
|
There is no operating system pre-installed. Operating systems supported include: Supports Windows, RHEL, SLES, OEL, Solaris, VMware, and Citrix Essentials for XenServer
|
|
Physical Dimensions
|
8.63"h x 18.4"w x 28.5"d
|
|
Ports/Connectors
|
Expansion slots: (2) PCI Express Gen2 x16, (2) PCI Express Gen2 x8, (5) PCI Express Gen2 x4
Expansion bays: (2) open half-height media bays available for tape drives, optical media, optional SAS HDD cage, (8) SFF SAS / SATA HD Bays (Standard); Up to (24) SFF SAS / SATA with optional drive cage (up to three 8 SFF drive cages can be installed)
Storage controller: HP Smart Array P410i/512 MB BBWC Controller (RAID 0 / 1 / 1+0 / 5 / 5+0)
I/O:
(1) Serial
(2) PS/2 (keyboard, mouse)
(1) VGA (+1 front VGA on rack models)
(4) RJ-45
(1) iLO 2 remote management port
(1) SD Slot
(6) USB 2.0 (2 rear, 2 front, 1 internal, 1 dedicated)
|
|
Power Notes
|
Power Supply: (2) 750-Watt CS HE Gold Hot-Plug redundant.
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
3 Years
|
|
Warranty - Parts
|
3 Years
|
HP SmartBuy ProLiant ML370 G6 Tower Xeon QC E5530 2.40GHz(x1)/8MB/6GB/OpnBay 2.5"SAS HS/DVD/GNIC/RPS - 519578-005
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=9695697#BVSecondaryCustomerRatings