HP ProLiant DL360 G6 Base Xeon QC E5530 2.40GHz(x1)/8MBL3/6GB/4xOpen Bay 2.5" SAS/SATA HS/GigNIC - 504635-001
- Intel 2.4GHz Xeon QC E5530 / Upgradable / 1 processor(s) installed / 2 processor(s) supported
- 6GB installed RAM / Technology is DDR3 SDRAM / 144GB maximum / 8MB installed cache / 0GB Hot-swap hard drive
- No Operating System Installed / 1U Rackmount / Supports Gigabit Ethernet Networking
Latest Intel 5500 Series Xeon Processors (Quad-Core and Dual-Core), with choice of DDR3 Registered or Unbuffered DIMMs, Serial Attached SCSI (SAS) and PCI Express Gen2 technology provide a high performance system, ideal for the full range of scale out applications.
What's more, the DL360 G6 steps up the fault tolerant in an ultra-dense platform with redundant power, redundant fans, mirrored memory, embedded RAID capability, and full-featured remote Lights-Out management.
HP ProLiant DL360 G6 Base Xeon QC E5530 2.40GHz(x1)/8MBL3/6GB/4xOpen Bay 2.5" SAS/SATA HS/GigNIC - 504635-001
|
General
|
|
|
Chassis Form Factor
|
1U Rackmount
|
|
Memory
|
|
|
Cache Memory (installed)
|
8 MB
|
|
RAM (installed)
|
6 GB
|
|
RAM (max)
|
144 GB
|
|
RAM Technology
|
DDR3 SDRAM
|
|
Operating System
|
|
|
OS Provided
|
No Operating System Installed
|
|
Optical Drive Information
|
|
|
CD/DVD Type
|
No Optical Drive
|
|
Processor
|
|
|
Chipset Type
|
Intel 5520
|
|
Data Bus Speed
|
1066 MHz
|
|
# Processors Installed
|
1
|
|
# Processors Supported
|
2
|
|
Processor Manufacturer
|
Intel
|
|
Processor Model Number
|
E5530
|
|
Processor Speed
|
2.4 GHz
|
|
Processor Type
|
Xeon QC
|
|
Processor Upgradability
|
Upgradable
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Floppy Type
|
No Floppy Drive
|
|
Hard Drive Capacity
|
0 GB
|
|
Hard Drive Interface
|
Serial Attach SCSI (SAS)
|
|
Hard Drive Type
|
Hot-swap
|
|
Storage Controller RAID Level
|
RAID 1
|
|
Storage Controller RAID Level
|
RAID 5+0
|
|
Storage Controller RAID Level
|
RAID 1+0
|
|
Storage Controller RAID Level
|
RAID 0
|
|
Storage Controller RAID Level
|
RAID 5
|
|
Storage Controller Type
|
Smart Array P410i
|
|
Video
|
|
|
External Resolution (max)
|
1600 x 1200
|
|
Video Card
|
ATI ES1000
|
|
Video RAM (installed)
|
32 MB
|
|
Video Slot Type
|
PCI Express 2.0 x16
|
|
Actual Weight
|
37.00 lb(s)
|
|
Compatibility Notes
|
Processor: Intel Xeon Processor E5530 (2.40 GHz, 8MB L3 Cache, 80 Watts, DDR3-1066, HT Turbo 1 / 1 / 2 / 2)
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2 and 1 cores active.
|
|
Contents
|
1U Rackmount server, software, documentation
|
|
Memory Notes
|
6GB PC3-10600R (DDR3-1333) Registered DIMMs, expandable to 144GB.
There are eighteen (18) DIMM slots. Three are occupied by removable 2GB modules, the others are available.
Memory notes:
For servers with eighteen (18) memory slots:
- There are three (3) channels per processor; six (6) channels per server
- There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
- Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
- Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1, 4; 2, 5; 3;6 on a 3DPC system or 1, 4; 2, 5; on a 2DPC system
No mixing DIMM voltage; all DIMMs must be the same voltage
Mfr. Part# 500656-B21 - PCC Item# 9661155 - 2GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 500658-B21 - PCC Item# 9678951 - 4GB PC3-10600 DDR3 SDRAM Upgrade Kit
Mfr. Part# 500660-B21 - PCC Item# 9648137 - 4GB PC3-8500 DDR3 SDRAM LP Upgrade Kit
Mfr. Part# 516423-B21 - PCC Item# 9661649 - 8GB PC3-8500 DDR3 SDRAM Upgrade Kit
Video memory: 32MB
|
|
O/S Notes
|
There is no operating system pre-installed. Operating systems supported include:
Microsoft Windows Server
Microsoft Windows Server Hyper-V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
Solaris 10 for x86 / x64 based Systems
NetWare
VMware
HP Citrix Essentials for XenServer
|
|
Physical Dimensions
|
1.7"h x 16.8"w x 27.8"d
|
|
Ports/Connectors
|
Expansion slots: (2) PCI-Express Gen 2 expansion slots: (1) full-length, full-height slot; (1) low-profile slot
Optional PCI-X Riser expansion slot
Expansion bays: (4) SFF bays standard in Entry / Base & High Efficiency models, with optional upgrade of 4 additional bays with the SFF HD Backplane Kit (516966-B21 PCC # 9833471)
Storage controller: HP Smart Array P410i/256MB Controller (RAID 0 / 1 / 1+0 / 5 / 5+0)
I/O:
(2) PS/2 (Keyboard, mouse)
(1) Serial
(1) VGA
(4) USB 2.0 (2 rear, 1 front, 1 internal)
(2) RJ-45
(1) iLO remote management port
(1) SD Slot
|
|
Power Notes
|
Power supply: (1) 460W CS HE Gold Power Supply
Input Requirements:
Rated Input Voltage 100 to 240VAC
Rated Input Frequency: 50 to 60Hz
Cooling:
3 fans ship standard in 1 processor models
4 fans ship standard in 2 processor models
N+1 fan redundancy standard
NOTE: The processor option kit contains the additional 2 fans, when upgrading the 1 processor models. A Fan Option kit can also be purchased separately for use with PCI Graphics card upgrades.
Server Power Cords: ProLiant DL servers no longer ship standard with NEMA power cords (187335-001) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the above NEMA power cord must be ordered separately.
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
3 Years
|
|
Warranty - Parts
|
3 Years
|
|
Warranty Details
|
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response.
|
HP ProLiant DL360 G6 Base Xeon QC E5530 2.40GHz(x1)/8MBL3/6GB/4xOpen Bay 2.5" SAS/SATA HS/GigNIC - 504635-001
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=9695523#BVSecondaryCustomerRatings