Print page E-mail page

2600 Series Router 2-port Serial WAN Interface Card

More From: Cisco

Item #: 119099

Mfr. Part#: WIC-2A/S=

Availability: In Stock

Est. Ship: Available - Ships in 24 Hrs

Cisco dual port serial WAN interface cards provide serial connections to remote sites or legacy serial network devices such as SDLC concentrators, alarm systems, and POS devices.

Overview

Specs

Reviews

2600 Series Router 2-port Serial WAN Interface Card - WIC-2A/S=

Remote Management over
Warranty: N/A

The dual Asynchronuous/Synchronous serial port interface card provides higher levels of serial port density for a single WAN interface card and is supported on the Cisco 2600 and 1720 series. The low serial speed interface card supports up to 128Kbps synchronous or 115.2 Kbps asynchronous serial links. Each port can be configured independent of the other allowing support for different physical interfaces (protocol and DTE/DCE). The card supports mixed asynchronous and synchronous operation as well.

The dual-serial port WAN interface card features Cisco's new, compact, Smart Serial connectors to support a wide variety of electrical interfaces when used with the appropriate transition cable. This includes: V.35, RS-232, RS-449, RS-530, RS-530A in male and female versions for both DCE and DTE devices. This feature provides easy configuration and re-configuration as network requirements change without the need of purchasing a different serial interface card. Two cables are required to support the two ports on the WIC.

To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to essential information, and advanced hardware replacement. To learn more, call your account manager or 1-800-800-0014 today!

Compatibility Notes	Cisco Routers: 2600 series 1600 Series 1700 series 3600 series
Contents	card, documentation
Ports/Connectors	(2) 5-in-1 Cisco 60-pin connectors (Cisco 5-in-1 cable support includes: V.35, X.21, RS-232, RS-449, and RS-530)
Returns Policy	Due to manufacturer restrictions, all sales on this item are final.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Cisco 2600 Series Router 2-port Serial WAN Interface Card - WIC-2A/S=

Cisco 2600 2 Port Serial WAN Interface Card - WIC-2T=

The dual-port Async/Sync serial WAN interface card (WIC) is intended for use with the Cisco 2600 routers. It provides (2) serial WAN interface ports.To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to essential information, and advanced hardware replacement. To learn more, call your account manager or 1-800-800-0014...

Cisco Refurb. 2-Port Serial WAN Interface Card for 2600 Series - No Returns, See Notes - WIC-2T-RF

This plug-in module provides two serial WAN ports for your 2600 series model.This refurbished item is available in limited quantities while supplies last.

Cisco 2-Port Modem WAN Interface Card - WIC-2AM-V2

The Cisco WIC-2AM-V2 Analog Modem WAN Interface Card adds the following features to WAN interface card modems: support for V.90/V.92/V.44, a Cisco IOS command is provided to update the modem firmware -- this command allows for upgrading in the field, rhe country code is set by a modemcap, the modem uses the Conexant AT Command Set, more country codes are...

Cisco 2-Port Asynchronous/Synchronous Serial WAN Interface Card - HWIC-2A/S

Serial and asynchronous high-speed WAN interface cards (HWICs) provide highly flexible connections for Cisco 1800, 2800, and 3800 series integrated services routers. These HWICs help customers to enable applications such as WAN aggregation, legacy protocol transport, console server, and dial access server. Customers can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network...

Axiom Memory Solutions 16MB Flash SIMM for Cisco 2600 Series Routers - AXCS-2600-16FS

This 16MB memory module is designed to enhance the performance of Cisco 2600 series routers.

Axiom Memory Solutions 32MB Flash SIMM for Cisco 2600 Series Routers - AXCS-2600-32FS

This 32MB memory module is designed to enhance the performance of Cisco 2600 series routers.

Axiom Memory Solutions 8MB Flash SIMM for Cisco 2600 Series Routers - AXCS-2600-8FS

This 8MB memory module is designed to enhance the performance of Cisco 2600 series routers.

Cisco 4-port 10/100BaseT Fast Ethernet Switch WAN Interface Card (WIC-4ESW)

The Cisco 4-port 10/100BaseT Fast Ethernet Switch WAN Interface Card (WIC-4ESW) for Cisco 1700 Series modular access routers is an intelligent managed switch, offering small businesses and enterprise small branch office customers the option to integrate LAN switching and routing into one platform.

ACP-EP Memory 16MB Flash SIMM for Cisco 2600 Series Routers - MEM2600-16FS-AO

THis 16MB memory upgrade is designed to enhance the performance of your Cisco 2600 series router.

Cisco 1-Port 4-Wire 56/64Kbps CSU/DSU WAN Interface Card - WIC-1DSU-56K4eql

The 1-port 4-wire 56/64 kpbs Channel Service Unit/Data Service Unit (CSU/DSU) WAN interface card (WIC) (WIC-1DSU-56K4) is combined within a single WIC and performs the CSU/DSU functions for both DDS (dedicated) and 4-wire switched 56 kbps data networks. It also provides an all rate synchronous interface to any dedicated Digital Data Service (DDS) point-to-point or multi-point network compatible with AT&T...