1550nm 80km SFP OC-3 Optical Transceiver

This LR Optics SFP is the optical transceiver that slides onto the baseboard.

The ADTRAN Total Access OPTI-T200 is an evolutionary descendant of ADTRAN's Total Access OPTI-3. The OPTI-T200 is optimized for applications requiring a single DS3 over fiber transport and utilizes a T200 form factor for mounting in type 200 or type 400 shelves. The ADTRAN OPTI-T200 transforms standard single OC-3 optical signals from the network to a single DS3-level signal at...

The OC-3 SMF MDA is a SingleMode Fiber module that fits the 8672ATM Gigabit Ethernet Routing Switch baseboard. It adds four OC-3 (optical card) ports to increase the versatility of your network.

The OC-3 MMF MDA is a MultiMode Fiber module that fits the 8683 POS Gigabit Ethernet Routing Switch baseboard. It adds two OC-3 (optical card) ports to increase the versatility of your network.

This fiber optic transceiver is hot-pluggable. It has a maximum transfer distance of 12.4 miles and optical wave length of 1310nm.

The OPTI-6100 OC-3 LR2 SONET long-reach, 1550 nm, single-mode, 2-fiber ADM Optical Multiplexer Module (OMM3VLR2) terminates an OC-3 fiber circuit to feed the OPTI-6100 chassis. It operates in Terminal mode or UPSR mode.

This transceiver module fits the Nortel MultiService Switch 15000 series., and offers OC-3 speed optical communications.The Multiservice Switch (MSS) 15000/20000 are high-capacity, carrier-grade switches that support Layer 2 VPNs, Layer 3 VPNs, circuit emulation and voice and wireless services to meet the performance challenges of voice and data service providers.

Cisco SFP optics for POS and ATM applications plug into a variety of SFP-based POS, TDM and ATM interfaces on Cisco router products. This line of SFP optics supports the following three data rates at various reaches: OC-3/STM-1 (155 Mbps), OC-12/STM-4 (622 Mbps), and OC-48/STM-16 (2, 488 Gbps). The SFPs are compatible with the SONET/SDH and ATM standards, and support...

This product allows for OC-3 SONET mid-speed services to be dropped via SC Single-mode connectors from the front of the OPTI-6100 chassis. There is a maximum of six 1+1 protected or twelve unprotected (one to three STS-1 payload each) (12 cards) per system. This module is both GR253 compliant and DCC capable.

The OC-3/12 is an intermediate-reach transceiver module that offers communications at the 1310nm wavelength, to increase the versatility of your network appliance.