Print page E-mail page

Aironet 4.9GHz 5.8dBi Omnidirectional Antenna with N Connector

More From: Cisco

Item #: 6152814

Mfr. Part#: AIR-ANT5175V-N

Availability: On Order

Est. Ship: Call for Availability

Overview

Specs

Reviews

Aironet 4.9GHz 5.8dBi Omnidirectional Antenna with N Connector - AIR-ANT5175V-N

Each Cisco Aironet radio product is designed to perform in a variety of environments. Implementing the antenna system can greatly improve coverage and performance.

An omnidirectional antenna is designed to provide a 360-degree radiation pattern. This type of antenna is used when coverage in all directions from the antenna is required.

To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to essential information, and advanced hardware replacement. To learn more, call your account manager or 1-800-800-0014 today!

General
Product Type	Antenna
Contents	Omnidirectional Antenna, documentation
Returns Policy	Due to manufacturer restrictions, all sales on this item are final.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Cisco Aironet 4.9GHz 5.8dBi Omnidirectional Antenna with N Connector - AIR-ANT5175V-N

Cisco 4.9GHz-5.8GHz 8.0dBi - Omni-directional Antenna - with N-Connector - AIR-ANT5180V-N

The Cisco Aironet 1520 Series provides three separate N connectors to attach the 2.4-GHz and 5-GHz antennas. This antenna is a 4.9 to 5.8-GHz, 8.0-dBi Omnidirectional Antenna with an N Connector.

Cisco 2.4GHz 8 dBi Omni-directional Antenna - with N-Connector - AIR-ANT2480V-N

The Cisco Aironet 1520 Series provides three separate N connectors to attach the 2.4-GHz and 5-GHz antennas. This antenna is a 2.4-GHz, 5-dBi Omnidirectional Antenna with N Connector to fit your Aironet 1520 series solution.

Cisco Aironet 5.8GHz 28dbi Dish Antenna - AIR-ANT58G28SDA-N

Cisco Aironet bridge antennas allow for extraordinary transmission distances between two or more buildings. Available in directional configurations for point-to-point transmission and sector or omni-directional configurations for point-to-multipoint implementations, Cisco has a bridge antenna for every application.

Cisco Aironet 12 dBi High Gain Omnidirectional Antenna - AIR-ANT24120

This 12-dBi high gain omnidirectional antenna operates in the 2400-2500 MHz band and is designed for use outdoors. The antenna is compatible with Cisco Aironet radio products utilizing a reverse-polarity threaded naval connector (RP-TNC) connector.This antenna is designed for use with Cisco Aironet access points and bridges but can be used with any 2.4-GHz Cisco Aironet radio device that uses...

Cisco Antenna Cable, RP-TNC (F-F) for Aironet HG Omnidirectional Antenna, 50ft - AIR-CAB050LL-R

This high-quality, low-loss 50-ohm cable is for use with the Cisco Aironet 12 dBi High Gain Omnidirectional Antenna. The antenna terminates with a special connector (reverse-TNC plug) after a short, 1-ft. cable. The mating connector to the antenna is an appropriate reverse-TNC jack connector.After the cable is attached to the antenna, make sure that the connections are sealed (if using...

Cisco Aironet 14-dBi Vertically Polarized Sector Antenna (AIR-ANT2414S-R)

Cisco Aironet bridge antennas allow for extraordinary transmission distances between two or more buildings. Available in directional configurations for point-to-point transmission and omnidirectional configuration for point-to-multipoint implementations, Cisco has a bridge antenna for every application.