Cable Runway Radius, 12" Wide, Black

This Cable Runway Radius Drop mounts to a cross member to help maintain a proper Category 5/5e/6 or fiber bend radius. This product features quick and easy installation using clevis pin attachment, and it provides a 3" bend radius.

The Cable Runway Radius Drop mounts to a cable runway cross member to help maintain proper Category 5, 5e, 6 or fiber bend radius. It features quick and easy installation using a clevis pin attachment. It is for use on a CPI Universal runway (Series 10250), or it may be used on other runway series with Cable Runway Movable Cross...

This Cable Runway Movable Cross Member permits the dropping of cables at any point between cross members of 12" cable runways. This Cross Member may be used alone or with a compatible Chatsworth Products, Inc., Cable Runway Radius Drop. Installation is quick and easy with the included hardware.

This UL-listed Cable Runway is 12" wide, and its overall length of 9' 8-1/2" complies with TELCO-style standards. Sections are individually boxed to prevent scratching and damage.Side stringer dimensions: 1.5"h x 0.375"wCross member dimensions: 0.5"h x 1"w x 12"lCross members are welded to side stringers in 9" intervals.

Mounts to cable cross member to help maintain proper Category 5/5e/6 or fiber bend radius. Quick and easy installation using clevis pin attachment. Designed for use with runs on CPI Universal runway. May be used on other runway series with Cable Runway Movable Cross Member (12115 series).

This 12" Wide 90-Degree Cable Runway E-Bend creates a 90 degree gradual sweep in horizontal plane for cable runway runs. It is designed for cabling in conformance with Category 5 minimum bend radius requirements (typically 4 times the cable diameter). Made of lightweight 1-1/2" x 3/8" tubular steel to fitstandard cable runway. Cross members welded at approximately 23 degree increments.

This is a package of (4) corner radius ladder sections with 90 degree vertical outside bends.

This is 25-pack of Single Black Universal or Trough Style Cable Runway Pathway Dividers.Cable Runway Pathway Dividers divide Cable Runway into multiple cable pathways. Use Cable Runway Pathway Dividers to organize cables supported by Cable Runway according to media type or destination.Cable Runway is the ideal pathway solution over racks and cabinets within the equipment room andtelecommunications rooms because it...

This is a ladder section with a 90 degree horizontal bend. The section is 12" wide and black.

Cable Runway Pathway Dividers divide a cable runway into multiple cable pathways. You can use Cable Runway Pathway Dividers to organize cables according to media type or destination. This is the ideal pathway solution over racks and cabinets within the equipment room and telecommunications rooms because it is open on both sides and at the bottom to allow backbone and...