Cable Runway Elevation Kit for Cabinets- 4" to 6" (Black)

This Cable Runway Elevation Kit for rack installation can be installed using 4", 5" or 6" elevation, and parallel or perpindicular mounting. Rack kits attach to the top of the rack with a Rack-To-Runway Mounting Plate (P/N 10595 or 12121, sold separately).

This kit is designed for supporting Cable Runway above a continuous row of CPI racks or cabinets of varying height. It also provides additional space between the tops of the racks or cabinets and the cable runway, which can be used to create smoother vertical to horizontal transition of cables.

This cable runway standoff support kit allows the attachment of cable runway 12" directly above and either parallel or perpendicular to existing cable runway. Each kit consists of the following items: two steel angle pieces, four steel brackets, and eight sets of nuts, bolts, and washers.

This Cable Runway Triangular Support Bracket in Black supports cable runway width between 6 and 12 inches. Its capacity is 100 lbs. The material for the bracket is 1/4" x 2" 6063-T5 aluminum bar, and the kit consists of (1) triangular bracket, (2) 5/16-18 x 2 1/4" J-bolts, (2) 5/16-18 hex nuts and (2) 5/16 lock washers.

This Cable Runway Radius Drop mounts to a cross member to help maintain a proper Category 5/5e/6 or fiber bend radius. This product features quick and easy installation using clevis pin attachment, and it provides a 3" bend radius.

The Cable Runway Radius Drop mounts to a cable runway cross member to help maintain proper Category 5, 5e, 6 or fiber bend radius. It features quick and easy installation using a clevis pin attachment. It is for use on a CPI Universal runway (Series 10250), or it may be used on other runway series with Cable Runway Movable Cross...

This is a mount platform for select Chatsworth cable runways.

This optional Cable Retractor Arm Kit keeps cables organized and prevents tangles, twists and damage. Four Saf-T-Grip Cable Management straps (3/4" x 4") keep cable organized. It is made of cold-rolled steel with zinc plating and clear finish. Maximum equipment depth is 22" when using cable management arm. Maximum height clearance to allow retractor arm to function properly without interference...

The CPI Cable Runway Wall To Rack Kit is a complete solution to the problem of providing support for cable between the rack and the wall. This kit features a 12'-wide runway and is for use with standard and universal racks with 3"-deep mounting channels.

This Junction-Splice Kit is used to create a 90-degree junction splice with all types of 1-1/2" x 3/8" or 2" x 3/8" cable runway. This kit consists of 4 each corner clamp plates, 2 each 3/8-16 x 1 3/8" trimmed head bolts, 2 each 3/8-16 hex nuts, 2 each 3/8 split lock washers.