2-Port Emulex 4Gb Fibre Channel PCI-X Adapter

A Quad Channel 4Gb Fibre Channel PCI Express card is recommended for customers in need of additional port requirements for direct connection to Xserve RAID or for additional bandwidth and multipathing. The Quad Channel 4Gb Fibre Channel PCI Express Host Bus Adapter comes with four 2.9m 4Gb Active Copper Fibre Channel SFP to SFP interconnect cables. The Fibre Channel PCI...

A Dual Channel 4Gb Fibre Channel PCI Express card is required to connect Xserve RAID to a Mac Pro or Xserve (Intel-based) with a PCI Express bus. It comes with two 2.9m 4Gb Active Copper Fibre Channel SFP to SFP interconnect cables. The Fibre Channel PCI Express card is installed in your computer and the cables are used to connect...

This affordable dual channel 4Gb/s host bus adapter (HBA) offers twice the performance of 2Gb/s at a small premium. The 4Gb/s Fibre Channel PCI Express adapter series was created to fulfill virtually any storage connection need or environment, whether data mining, video and media streaming, or providing high availability. All LSI adapters support end-to-end error detection (cycle redundancy check or...

The Emulex LP1150 host bus adapter offers highly integrated 4Gb/s Fibre Channel connectivity solutions for Storage Area Networks!

This affordable dual channel 4Gb/s host bus adapter (HBA) offers twice the performance of 2Gb/s at a small premium. The 4Gb/s Fibre Channel PCI Express adapter series was created to fulfill virtually any storage connection need or environment, whether data mining, video and media streaming, or providing high availability. All LSI adapters support end-to-end error detection (cycle redundancy check or...

This 20-port QLogic Fibre Channel (FC) switch module helps to deliver high-performance SAN solutions using 4Gb Fibre Channel Technology. For customers deploying standards-based solutions, this switch supports interoperability in open mode leveraging FC-SW-2 -compliant SANs. Easily integrated into core or edge SAN configurations using QLogic's SANsurfer Management Suite. This tool eases installation, configuration and management of your SAN infrastructure-all from...

The LightPulse LP9002L Fibre Channel PCI host adapter provides support for 2Gb/s Fibre Channel data rates, delivering the industry s highest performance. The LP9002L features automatic speed negotiation capability which allows complete compatibility with existing 1Gb/s Fibre Channel SANs, while allowing seamless upgrades to higher speed 2Gb/s SANs.The LP9002L provides the flexibility and broad interoperability needed for complex highly scalable...

Designed as the optimum choice for Sun Microsystems servers implementing SBus, the QLogic SANblade QSB2342-CK dual port host bus adapter offers 2-Gbps fibre channel combined with 64-bit, 25MHz SBus providing the performance and interoperability needed for highly scalable SANs and DAS environments. It features autonegotiation of fibre channel speed bit rate, automatic topology detection, concurrent support for SCSI and IP...

This 4Gb Fibre Channel Host Bus Adapter is a single channel (HBA) with an optical LC type connector. It offers automatic speed negotiation with existing 1Gb/s and 2Gb/s Fibre Channel SANs, as well as superior performance capable of sustaining up to 100,000 I/Os per second per channel. 4Gbps FC increases aggregate throughput rate to 1.6GBps in full-duplex mode.The Qlogic SANsurfer...

The LightPulse LP9002-E Fibre Channel PCI host adapter provides support for 2Gbps fiber channel data rates. The LP9002-E features automatic speed negotiation capability which provides complete compatibility with existing 1Gbps Fibre Channel SANs, while allowing seamless upgrades to higher-speed 2Gbps SANs. The LP9002-E provides the flexibility and broad interoperability needed for complex highly scalable SANs. The LP9002-E also features sophisticated...