Print page E-mail page

Transition (DB-9)1300nm multimode (ST) Module Media Converter (SRS2F3111-100)

More From: Transition Networks

Item #: 472737

Mfr. Part#: SRS2F3111-100-NA

Availability: In Stock

Est. Ship: Usually Ships Monday

Transition Networks' serial RS232 to Fiber Media Converter allows you to extend the distance between serial connections with the use of fiber optic cable.

Overview

Specs

Reviews

Transition (DB-9)1300nm multimode (ST) Module Media Converter (SRS2F3111-100) - SRS2F3111-100-NA

Supports Ethernet Networking
Data Transfer Speeds up to 115Kbps

This full-featured converter transmits the full complement of RS232 flow control/handshaking signals optically and supports full or half-duplex data transmission at speeds up to 128Kb/s.

The diagnostic features included on this converter make installation easy and intuitive. A DTE/DCE switch eliminates the frustration over selecting the appropriate cable. A loop-back switch allows for complete diagnostic testing prior to system turn-up or during troubleshooting. Unit and Port LEDs allow for quick status information of the converter.

In addition to status LEDs and switch settings for local management, these converters can also be managed from remote locations when used in conjunction with a managed Point System chassis.

Performance
Data Transfer Rate	115 Kbps
Protocols
Networking Protocol	Ethernet
Actual Weight	1.00 lb(s)
Compatibility Notes	Features: Remote management Local or Remote loop-back on copper and fiber DTE / DCE switch for easy installation with straight-through cabling Full / Half-duplex transmission at speeds up to 128Kb/s Supports the following flow control signaling: DCD - Data Carrier Detect RXD - Receive Data TXD - Transmit Data DTR - Data Terminal Ready SG - Signal Ground DSR - Data Set Ready RTS - Request To Send CTS - Clear To Send Compliance UL Listed; C-UL Listed (Canada); CISPR22 / EN55022 Class A + EN55024; EN60950 Class A; FCC Class A; CE Mark
Contents	Unit, documentation.
Physical Dimensions	1.2"h x 3.3"w x 1.2"h
Ports/Connectors	Connectors: (1) DB-9 (male); (1) duplex fiber optic Fiber Optic Connector Specs: SRS2F3111-100 & SRS2F3113-100 Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -30.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.0 dB SRS2F3114-100 Min TX PWR: -15.0 dBm Max TX PWR: -8.0 dBm RX Sensitivity: -31.0 dBm Max In PWR: -8.0 dBm Link Budget: 16.0 dB SRS2F3115-100 Min TX PWR: -8.0 dBm Max TX PWR: -2.0 dBm RX Sensitivity: -34.0 dBm Max In PWR: -7.0 dBm Link Budget: 26.0 dB
Power Notes	Power Standard: External AC/DC 12VDC 0.5 A min Optional: SPS-1872-SA or SPS-1872-PS External wide input DC power supply output 12VDC, 1.0 A Power Consumption 5.0 watts
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	Lifetime
Warranty - Parts	Lifetime

Related to Transition Networks Transition (DB-9)1300nm multimode (ST) Module Media Converter (SRS2F3111-100) - SRS2F3111-100-NA

Transition Networks POTS 2-Wire Slide-In-Module Media Converter RJ-11 to SMF SSF 1310TX/1550RX SC 20KM - CAPTF3329-110

This Transition POTS 2-wire Point System Slide-In-Module Media Converter supports Customer Side FXO. It connects to a Remote Phone Device.Port one of this module supports Twisted Pair (RJ-11) [5 km]. Port two supports 1310nm TX / 1550nm RX single fiber single mode (SC) [20 km].The Transition POTS phone line converter system is intended to connect central-office voice grade signals to...

Transition Networks POTS 2-Wire Slide-In-Module Media Converter RJ-11 to SMF SF 1550TX/1310RX SC 40KM - CAPTF3329-113

This Transition POTS 2-wire Point System Slide-In-Module Media Converter supports Customer Side FXO. It connects to a Remote Phone Device.Port one of this module supports Twisted Pair (RJ-11) [5 km]. Port two supports 1550nm TX / 1310nm RX single fiber single mode (SC) [40 km].The Transition POTS phone line converter system is intended to connect central-office voice grade signals to...

Transition Networks Point System Slide-In-Module Media Converter 10/100BaseTX RJ-45 to 10/100BaseSX 850nm MMF ST 300m - CSETF1011-205

Point System Slide-In-Module Media Converters extend network distances over 100BaseSX multimode fiber.

Transition Networks Point System Slide-In-Module Media Converter 10/100BaseTX RJ-45 to 10/100BaseSX 850nm MMF SC 300m - CSETF1013-205

Point System Slide-In-Module Media Converters extend network distances over 100BaseSX multimode fiber.

Transition Networks 10/100BaseTX to 100BaseFX Slide-in-Module Media Converter, RJ-45 and SC - CBFTF1035-100

The 2-port Ethernet/fast Ethernet bridging media converter is designed to be installed in a Transition Networks PointSystem chassis and connects 10Base-T Ethernet or 100Base-TX fast Ethernet twisted-pair copper network devices to network devices on a 100Base-FX fast Ethernet fiber network.

Transition Networks 100BaseTX to 100BaseFX 1300nm MM ST 2km Media Converter - J/FE-CF-04-UK

Simply upgrade twisted pair networks to fiber and end the problems of difficult installations associated with traditional converters. The "Just Convert-IT" line of media converters is there for when you want an inexpensive, no frills converter that offers the same quality and reliability as Transition's full-featured line of products. Used in pairs, this media converter can extend distances between two...

Transition Networks 10BaseT to 10BaseFL 850nm MM ST 2km Media Converter - J/E-CF-02-UK

Convert 1000BASE-T ports over to 1000BASE-SX/LX on a port-by-port basis. Used individually or in pairs, this media converter can extend Gigabit Ethernet up to 2 km over multimode fiber or up to 65 km over single mode fiber.

IMC Networks 1300 SM ST to 1300 MM ST IMCV Media Converter Module SM to MM 30km - 50-14520

The 10 & 100 Mbps Ethernet series of SNMP-manageable Media Converters are modules designed to fit virtually any installation with a mix of twisted pair, single-mode fiber, multi-mode fiber and thin coaxial Ethernet cabling. As the media conversion solution for switched ports recommended worldwide by leading switch manufacturers such as Cisco, 3Com and Bay Networks, the series allows the user...

Transition Networks T1/E1 RJ-45 to 1300NM MMF-ST 5KM Media Converter - SSDTF1027-105

Remote management in a stand-alone device. When used in conjunction with a managed Point System chassis, this standalone unit can be managed remotely. The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them "in-band" from admin locations.

Transition Networks 1300nm multimode (ST) 4x T1/E1 to Fiber Transport Mux Point System Slide-In-Module Media Converter - C4TEF1011-100

This product will provide copper connections compatible with G.703 and AMI/B8ZS/HDB3, while the optical connection will run at 155Mbps. A hardware-based solution guarantees the constant bit rate of TDM transport without requiring traffic management. The product provides physical layer status monitoring and alarm classification functions for Telecom operators to manage their fiber optic network and reduce operation and maintenance costs....