Print page E-mail page

Omnitron Etherner Fiber

Omnitron Systems Technology, Inc.

Item #: 185706

Mfr. Part #: 4332-1

Overview

Specs

Reviews

Omnitron Etherner Fiber - 4332-1

Ethernet 100Base-FX, Ethernet 100Base-TX Cabling
Supports Fast Ethernet Networking

The FlexPoint 100Fx/Tx converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types. The FlexPoint 100Fx/Tx is a Fast Ethernet 100BaseFx fiber to 100BaseTx unshielded twisted pair (UTP) converter. It supports auto-negotiation for half-duplex and full-duplex operations and supports a variety of fiber options. The FlexPoint 100Fx/Tx auto-adapts to the highest level of performance supported by the device connected to the UTP port.

When the device is a switch or a workstation that supports full duplex, the FlexPoint 100Fx/Tx adapts to the full-duplex mode and provides an effective 200 Mbps bandwidth. When the connected device is a hub or a workstation that only supports half duplex, the FlexPoint 100Fx/Tx adapts to the half-duplex mode and provides the nominal 100 Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation.

The FlexPoint 100Fx/Tx fiber operates at 1300 nm and uses SC, ST, VF-45 or MT-RJ connectors. Multimode models that support distances of up to 2 km and single-mode models that support distances of up to 58 km are available.

high-density, 14-unit, dual power-redundant Powered Chassis.

Connectivity
Cabling Type	Ethernet 100Base-FX
Cabling Type	Ethernet 100Base-TX
Protocols
Networking Protocol	Fast Ethernet
Actual Weight	2.00 lb(s)
Contents	Transceiver, documentation
Physical Dimensions	1"h x 3"w x 4"d
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Omnitron Systems Technology Omnitron Etherner Fiber - 4332-1

Omnitron Systems Technology Omnitron iConverter 10FL/T Media converter - 8303-1

The iConverter 10FL/T is a 10Base-FL to 10Base-T converter that converts between unshielded twisted pair (UTP) and fiber LANs and joins their collision domains. It supports half-duplex and full-duplex operations. In the 10 Mbps half-duplex, the iConverter 10FL/T connects among hubs, switches and workstations. In 20 Mbps full-duplex, it connects between switches, or between switches and high bandwidth servers and...

Omnitron Systems Technology IConverter 100FF 100BaseFX - 8622-1

The iConverter Single-Mode to Multimode Fiber Converters provide a cost-effective solution to extend network distances by connecting multimode fiber networks or devices over single-mode fiber cabling. Multimode models are available with distances up to 5 km. Single-mode models are available with standard 1310 nm wavelength with distances of up to 80 km and with 1550 nm with distances up to...

Omnitron Systems Technology OmniStar 400 5250 Star, 1 TWNX - 2507

The OmniStar 400 is an IBM 5250 and 5250 Express compatible star repeater that replaces traditional twinax daisy chains and provides star configuration on twisted pair wiring. It supports distances of 3, 000 feet on each twisted pair and 5, 000 feet on twinax for a total of 8, 000 feet from the host. For cases that require additional distance,...

Omnitron Systems Technology OmniStar 400 5250 Star, 1 TWNX - 2500

Omnitron Systems Technology iConverter OC3FF Dual Fiber SC/MM to SC/SM (8661-1)

This Omnitron iConverter OC3FF Dual Fiber has SC/MM to SC/SM connectivity.The iConverter OC3FF manageable media converter is a member of the modular iConverter product family. It provides multimode to single-mode fiber conversion and is a cost-effective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling. iConverter OC3FF models are available with multimode, single-mode, and...

Omnitron Systems Technology Omnitron Systems 2 ft. Cascade Cable (8080-3):

This Omnitron Systems 2 ft. Cascade Cable (8080-3) is for use with an iConverter Network Management Module.

Omnitron Systems Technology Omnitron iConverter 5-Module AC Power Chassis, Single PS (8220-1)

The 1U (1.75 inch) high, 5-Module Managed Power Chassis can be mounted in a 19-inch or 23-inch rack and features dual hot-swappable redundant power supplies. Universal AC or 48VDC power supplies can be used in any combination. The power supplies operate in load-sharing mode for improved reliability and fault tolerance. When used with the iConverter management module, the power system...

Omnitron Systems Technology iConverter OC12FF Dual Fiber OC12/STM4 Fiber Converter, 550m/12km - 8681-1

The iConverter OC12FF manageable media converters are a members of the modular iConverter product family. They provides multimode to single-mode fiber conversion and are a cost-effective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling.iConverter OC12FF models are available with multimode, single-mode, and single-fiber options. The single-mode fiber port supports SC connectors and distances...

Omnitron Systems Technology 1000FF SC/MM to SC/SM/SNG Fiber 850nm/220M-TX1310nm/RX1550nm/20km - 8650-1

The iConverter 1000FF manageable media converter is a member of the modular iConverter product family. It provides single-mode to multimode fiber conversion and is a cost-effective solution to extending network distances by connecting multimode fiber network devices over single-mode fiber cabling. iConverter 1000FF models are available with multimode, single-mode, and single-fiber options. The single-mode fiber port supports SC connectors and...