10 100 30km Single Mode Media Converter

The GC-G21SCS is a 1000Mbps Gigabit Ethernet Media Converter offering a simple and cost-effective method to convert between 1000BaseT UTP Cat5/5e cables and 1000BaseLSX single mode 9/125um (1310nm wave length) fiber cables. 1000BaseT transmission over UTP cable can transmit signals up to 100 meters. Using GC-G21SCS, the same signals can transmit up to 10K meters via single mode fiber cables....

The Single Mode to Multimode Media Converter extends distances up to 80km over single mode fiber with network protocols that use 1300nm wavelength for fiber optic transmission. In fact, distances can be extended in any 155Mbps networking protocol. It extends a Fast Ethernet backbone connection up to 80km for MAN (metropolitan area network) applications.

The perfect solution for converting between 10 Base-T or 100 Base-TX electrical Ethernet signals and 100 Base-FX optical Ethernet signals, this 10/100 RJ45 multi-mode Converter supports a maximum multi-mode fiber optic cable distance of 2km, ensuring a highly reliable signal for ideal network performance. And its compact design and weight makes it portable and unobtrusive to carry.Operating Temperature: -10 -50...

The perfect solution for converting between 10 Base-T or 100 Base-TX electrical Ethernet signals and 100 Base-FX optical Ethernet signals, this 10/100 RJ45 multi-mode Converter supports a maximum multi-mode fiber optic cable distance of 2km, ensuring a highly reliable signal for ideal network performance. And its compact design and weight makes it portable and unobtrusive to carry.Operating Temperature: -10 -50...

Do you need to bridge networks over a high-speed fiber optic backbone? The ET91000SM40 is a single-mode media converter that allows you to convert 1000BaseLX fiber optic signals into Gigabit Ethernet at distances up to 40 km (25 miles). Operating at full Gigabit speeds end-to-end, this media converter is the perfect way to create a high-speed network.

This Fiber Converter with an SC-type connector transforms 10/100BaseTX UTP/STP media to 100BaseFX single-mode media. Designed to connect up to 30km, it's a perfect plug-and-play, hot-swappable Fast Ethernet, single-mode solution.

These products offer a low cost transport capability for four T1/E1, one Ethernet, and one RS232 data channel line (x4TEF10XX-11X). The offering will provide copper connections compatible with G.703, AMI/B8ZS/HDB3, 10/100BaseTX, as well as RS232 channel, while the optical connection will run at 155Mbps. TDM traffic is not mapped to Ethernet. A hardware-based solution guarantees the constant bit rate of...

This Bi-Directional Single-Fiber Media Converter transforms 10/100Mbps-TX UTP/STP media to 100BaseFX media and vice versa. This converter will give your switch or hub the ability to interface with fiber connection over a distance up to 20km. It is hot pluggable and plug-and-play compatible.

Bridging media will provide conversion and integration solutions for half duplex and full duplex environments. AutoCross on all TP ports eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. Only Transition Networks guarantees compatibility with any 10/100-compliant...

TRENDnet's TFC-110 series Fiber Media Converter transforms 10/100BaseTX UTP/STP media to 100BaseFX media and vice versa. The 10/100BaseTX port auto-senses 10 or 100Mbps connection speed, auto-negotiates half-/full-duplex mode, and auto-selects MDI-X / MDI-II media type. The fiber connection can be multi-mode SC, MT-RJ, or single-mode SC Connector and it has a slide-switch for selecting half- or full-duplex mode. This converter...