Print page E-mail page

10 100BaseTX to 100BaseFX SC Media Converter MMF with Enhanced Missing Link

10/100BaseTX to 100BaseFX SC Media Converter MMF with Enhanced Missing Link

Allied Telesyn International

Item #: 5119342

Mfr. Part #: AT-FS232-10

Overview

Specs

Reviews

10/100BaseTX to 100BaseFX SC Media Converter MMF with Enhanced Missing Link - AT-FS232-10

Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 100Base-FX Cabling
Supports Ethernet Networking
Data Transfer Speeds up to 100Mbps

When upgrading your traditional 10Mbps Ethernet network or extending your 100Mbps Fast Ethernet network, switches are required, the AT-FS232 switch provides the ideal solution. The AT-FS232 will connect any two copper networks - irrespective of speed, and allow any copper network to be extended over a Fast Ethernet fiber link up to distances of 100km. Many new backbone switch products now support the industry standard IEEE 802.1Q specification for VLANs (Virtual LANs), which requires extra long data packets to be sent on the network. The AT-FS232 switch has been designed to be fully compatible with these long packets, allowing them to be used in modern networks. Switches not supporting this feature will discard these extra long packets, making them unsuitable for modern networks. The switches can be used almost anywhere due to their small physical size and external power supply. Alternatively, they can be mounted in a chassis along with Allied Telesyn's media converters. This allows users to construct any mix of network conversions, with the additional option of a redundant power supply.

The Missing Link feature allows the ports on the media converter to pass the "Link" status of their connections to each other. When the media converter detects a problem with one of the ports, such as the loss of connection to a node, it shuts down the connection to the other port, thus notifying the node that the connection has been lost. The value to this type of network monitoring and fault notification is that some hubs and switches can be configured to take a specific action in the event of the loss of connection on a port. In some cases, the unit can be configured to seek a redundant path to a disconnected end-node or send out a trap to a network management station alerting the network administrator of the problem. The Smart Missing Link mode is one step advance from the Missing Link mode.

Connectivity
Cabling Type	Ethernet 100Base-FX
Cabling Type	Ethernet 100Base-TX
Cabling Type	Ethernet 10Base-T
Performance
Data Transfer Rate	100 Mbps
Protocols
Networking Protocol	Ethernet
Actual Weight	0.70 lb(s)
Contents	Unit, documentation
Physical Dimensions	1"h x 4.1"w x 3.7"d
Ports/Connectors	Power Device Power adapter - external Voltage Required AC 110 / 230 V ( 50 / 60 Hz ) Power Consumption Operational 6 Watt Interfaces 1 x network - Ethernet 10BaseT / 100BaseTX - RJ-45 female 1 x network - Ethernet 100BaseFX - SC multi-mode female x 2
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Allied Telesyn International 10/100BaseTX to 100BaseFX SC Media Converter MMF with Enhanced Missing Link - AT-FS232-10

Allied Telesyn International 10/100BaseTX to 100BaseFX SC Media Converting Switch - AT-FS202-90

The AT-FS202 series of two-port Fast Ethernet switches interconnect segments of Ethernet and Fast Ethernet networks to upgrade, extend and cost-effectively relieve network congestion where it's needed. The switches not only provide a means for connecting to a new network media or speed, but they further improve performance by providing a means to segment networks into smaller, connected subnets.The AT-FS202...

Allied Telesyn International 10/100BaseTX to 100BaseFX SC Media Converter SMF (to 40Km) w/ Enhanced Missing Link - AT-FS232/2-10

Allied Telesyn International 10/100BaseTX to 10BaseFL/100BaseSX SC Fiber Converter - AT-MC116XL-10

The Allied Telesyn range of 850nm fiber Fast Ethernet media converters allows users to extend the size of UTP networks with the use of fiber cabling. Converting between 10T and 10FL or 100TX and 100SX fiber quickly and reliably, the AT-MC116XL addresses the growing demand for a low-cost solution for fiber installations of 300 meters or less. To maximize flexibility,...

Allied Telesyn International Converteon Module 10/100BaseTX to 100FX(SC) SMF Media Converter - AT-CV102/2

The AT-CV102/2 Ethernet Media Converter line card is designed to extend the distance of your network by interconnecting LAN devices that are physically separated by large distances. Compliant with IEEE standards, this converter will inter-operate with other standards-based media converters, switches, fiber adapter cards, etc over the fiber optic cable.

Allied Telesyn International 10/100BaseTX to 10BaseFL/100BaseSX ST Fiber Converter - AT-MC115XL-10

This 850nm fiber Fast Ethernet media converter lets you extend the size of UTP networks with the use of fiber cabling. Converting between 10T and 10FL or 100TX and 100SX fiber quickly and reliably, the AT-MC115XL addresses the growing demand for a low-cost solution for fiber installations of 300m or less. To maximize flexibility, the converter is available in ST...

Milan 2-port Switch 10/100BaseTX to 100BaseFX SC MM 2km - MIL-S3413

Add speed and distance to your network with the MIL-S341x Series of Media Conversion Modules from Milan Technologies. These 2-port modular switches convert 10/100BaseTX to 100BaseFX, extending network distances from 2km up to 100km. Alternatively, if you're migrating your network to 100Mbps, the MIL-S341x Series also converts 10BaseT devices to 100BaseTX, extending the lifetime value of your present hardware.

Tripp Lite 10/100BaseT to 100BaseFX-SC Media Converter - N784-001-SC

Connect 10BaseT/100BaseT UTP Ethernet to 100BaseFX Fiber Ethernet.

Allied Telesyn International Media Converter 100BaseTX to 100BaseFX (SC) 15km - AT-MC103XL-10

Extend the size of UTP and multi-mode fiber networks up to 100km via single-mode cabling with Allied Telesyn's Fast Ethernet Media Converters.

Allied Telesyn International Media Converter 100BaseTX to 100BaseFX (SC) 40km, US Power Cord - AT-MC103LH-10

Extend the size of UTP and multi-mode fiber networks up to 100km via single-mode cabling with Allied Telesyn's Fast Ethernet Media Converters.

TRENDnet 10/100BaseTX to 100BaseFX SC Single-Mode FIber Converter - TFC-210S30

This Fiber Converter with an SC-type connector transforms 10/100BaseTX UTP/STP media to 100BaseFX single-mode media. Designed to connect up to 30km, it's a perfect plug-and-play, hot-swappable Fast Ethernet, single-mode solution.