Print page E-mail page

10 100BaseTX RJ-45 to 10 100BaseSX 850nm MMF SC 300m Stand-alone Media Converter

More From: Transition Networks

Item #: 5101978

Mfr. Part#: SSETF1013-205

Availability: In Stock

Est. Ship: Available - Ships in 24 Hrs

Ideal for building backbone and horizontal cabling applications.

Overview

Specs

Reviews

10/100BaseTX RJ-45 to 10/100BaseSX 850nm MMF SC 300m Stand-alone Media Converter - SSETF1013-205

Fiber optic, Ethernet 100Base-TX, Ethernet 100Base-SX Cabling
Supports Ethernet, Fast Ethernet Networking

By utilizing lower cost 850nm optio-electronics, the 10/100BaseSX converter provides compatibility with legacy 10BaseFL devices while providing the lowest possible cost solution for fiber installation of up to 300 meters (100BaseSX). This makes it ideal for building backbone and horizontal cabling applications where cost and 10/100 auto-negotiation are critical.

The 10/100 SX Media Converter operates easily under heavy traffic loads without generating excess heat; meaning a failure-prone internal fan is unnecessary. As with all Transition Networks' Media Converters, this is a quality product made in the USA and supported by a lifetime warranty. Transition Networks' Media Converters are known for their ruggedness and reliability. The 99.83% customer acceptance rating for this product means approximately 1 in 1000 experience a failure in the field.

Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 300 meters over multimode fiber (100BaseSX).

A single 10/100 SX Media Converter can be used to connect remote devices as well. Using one media converter, a switch with a copper port can be connected to a switch or any other 10/100BASE-SX compliant device with an existing fiber interface.

Connectivity
Cabling Type	Ethernet 100Base-TX
Cabling Type	Ethernet 100Base-SX
Cabling Type	Fiber optic
Protocols
Networking Protocol	Ethernet
Networking Protocol	Fast Ethernet
Actual Weight	0.70 lb(s)
Compatibility Notes	Key Features: N-Way Auto-Negotiation: The converter is auto-negotiation enabled for 10 or 100Mbps and full or half duplex operation. LinkAlert: Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. AutoCross: AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.
Contents	Converter, documentation
Physical Dimensions	1.0"w x 4.8"d x 3.25"h
Ports/Connectors	(1) RJ-45 port (1) duplex fiber optic SC port
Power Notes	External AC/DC required; 9V DC; 0.5A; unregulated; standard
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	Limited Lifetime
Warranty - Parts	Limited Lifetime

Related to Transition Networks 10/100BaseTX RJ-45 to 10/100BaseSX 850nm MMF SC 300m Stand-alone Media Converter - SSETF1013-205

Transition Networks 10/100BaseTX RJ-45 to 10/100BaseSX 850nm MMF ST 300m Stand-alone Media Converter - SSETF1011-205

Ideal for building backbone and horizontal cabling applications.

Transition Networks Point System Slide-In-Module Media Converter 10/100BaseTX RJ-45 to 10/100BaseSX 850nm MMF SC 300m - CSETF1013-205

Point System Slide-In-Module Media Converters extend network distances over 100BaseSX multimode fiber.

Transition Networks Point System Slide-In-Module Media Converter 10/100BaseTX RJ-45 to 10/100BaseSX 850nm MMF ST 300m - CSETF1011-205

Point System Slide-In-Module Media Converters extend network distances over 100BaseSX multimode fiber.

Transition Networks Single Fiber Converter 100BaseTX RJ-45 to 100BaseFX SM 1310TX/1550RX SC 60km - CFETF1029-209

Fast Ethernet Single Fiber Point System Slide-In-Module Media Converters automatically detect and report loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or...

Transition Networks Single Fiber Converter 100BaseTX RJ-45 to 100BaseFX SM 1550TX/1310RX SC 60km - CFETF1029-210

Transition Networks Stand-Alone Media Converter 100BaseTX/FX [100 m/328 ft.][120 km/74.6 miles] - E-100BTX-FX-05(XLW)

Used in pairs, this media converter can extend distances between two twisted pair switches, or between a switch and a server.

Transition Networks RS232 Just Convert-IT Copper to Fiber Stand-Alone Media Converter, DB-9 (male) to 1300nm MMF (ST) - J/RS232-TF-01

Transition Networks? ? Just Convert-IT? serial RS-232 to Fiber Media Converter is an inexpensive, no frills way to extend the distance between serial connections with the use of fiber optic cable. This converter supports full or half-duplex data transmission at speeds up to 120Kb/s. Unit and Port LEDs allow for quick status information on the converter.