SDSL Network Extender 2000 - LR0020A-KIT-R2
Black Box SDSL Network Extenders provide affordable, high-speed LAN connections and Internet access over any grade of UTP cable - CAT5, CAT3, even CAT2.
They are ideal for use in situations where the local network and the gateway to the ISP are not close enough to be directly attached to each other, such as in campus applications. They enable you to establish both DSL and Ethernet links on each side of your single copper pair and essentially provide a very long Ethernet connection.
For top speed, the SDSL Network Extender 2000 Kit supports up to a blazing 2.3 Mbps, depending on the range you select.
This plug-and-play extender requires little configuration. Just plug in the SDSL line, make the Ethernet connections. Then plug in the XDSL lines and make the Ethernet connection. For maximum distances, you may have to adjust the DIP switches to select the range and speed.
And because the extenders can perform symmetrical data transfer, they are well-suited for applications in which two network segments must be able to send and receive data at equally fast rates.
SDSL Network Extender 2000 - LR0020A-KIT-R2
|
Protocols
|
|
|
Networking Protocol
|
Ethernet
|
|
Actual Weight
|
0.60 lb(s)
|
|
Compatibility Notes
|
Use any unshielded twisted-pair cable to link your Ethernet network across long distances.
The SDSL Extender 2000 provides speeds up to 2.3 Mbps and distances up to 2.27 miles (3.65 km) over 1-pair UTP.
Seamless DSL-to-Ethernet media conversion and bridging.
IP network service providers: Give your customers multiple service offerings and the opportunity to add bandwidth incrementally as they need it!
Plug-and-play installation.
Switch-selectable data rates for high-speed, short-range or lower-speed, longer-range operation.
Bandwidth: LR0020A-KIT-R2: Selectable 272 kbps, 528 kbps, 784 kbps, 2.3 Mbps (symmetrical)
|
|
Contents
|
Unit, power supply, documentation
|
|
Physical Dimensions
|
1.25“H x 5.5“W x 4.5“D
|
|
Ports/Connectors
|
Interface: Network: IEEE 802.3 Ethernet 10BaseT;
SDSL: RJ-45 2-wire (TC-PAM encoding for LR0020A-KIT-R2)
Connectors: (2) RJ-45
Indicators: (6) LEDs: SDSL Connection, Collision, Rx, Tx, Lnk, Power
|
|
Power Notes
|
100–125 VAC, 60 Hz, external wallmount; 230-VAC version on request
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
SDSL Network Extender 2000 - LR0020A-KIT-R2
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=5144687#BVSecondaryCustomerRatings