Power Over Ethernet (PoE) Splitter, 1-in/1-out, CSMA/CD - TPE-102S
The TPE-102S Power over Ethernet Splitter provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain. This splitter allows you to split one PoE source into separate power and data sources. It supports up to 12W at 5V DC. The advanced auto-sensing algorithm enables it to draw power from 802.3af PSE (Power Source Equipment) devices. This splitter features high safety standards with short circuit protection and auto disconnection for over voltage or under voltage situations. It supports power detection and classification.
Power Over Ethernet (PoE) Splitter, 1-in/1-out, CSMA/CD - TPE-102S
|
Actual Weight
|
0.40 lb(s)
|
|
Compatibility Notes
|
Network Media: 10Mbps: Cat 3, 4, 5 Unshielded / Shielded / Screened Cable 100Mbps: Cat 5, 5E, 6 Unshielded / Shielded / Screened Cable Protocol: CSMA / CD Topology: Star Certifications: FCC, CE
Temperature: Operating: 32 to 104 F; Storage: 14 to 158 F Humidity: 10% to 90% non-condensing
|
|
Contents
|
Splitter, power jumper cable, Cat. 5 cable (23.6"), documentation
|
|
Physical Dimensions
|
1"h x 3.4"w x 3.4"d
|
|
Ports/Connectors
|
(1) RJ-45 PoE in (data and power) (1) RJ-45 data out (data only) (1) power out
|
|
Power Notes
|
DC output: 5V / 2.4A Consumption: 15.4W max. Diagnostic LEDs: 48V Power In (Green), 5V Power Out (Green) Power jumper cable: 0.1” Diameter on the Connector (Center Positive)
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
5 Years
|
|
Warranty - Parts
|
5 Years
|
Power Over Ethernet (PoE) Splitter, 1-in/1-out, CSMA/CD - TPE-102S
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=5902396#BVSecondaryCustomerRatings