Single Band 802.11a/g/n Fixed Unified AP Internal Antenna FCC Configuration - AIR-LAP1141N-A-K9
- Supports IEEE 802.11b, IEEE 802.11g Networking
- Data Transfer Speeds up to 300Mbps
The Cisco Aironet 1141N Access Point is a business-ready, 802.11n access point designed for simple deployment and energy efficiency. The high-performance platform, which offers at least six times the throughput of existing 802.11a/g networks, prepares the business for the next wave of mobile devices and applications. Building on the Cisco Aironet heritage of RF excellence, the 1141N combines the industry's most widely deployed 802.11n technology with a sleek industrial design that blends seamlessly into any enterprise environment. Designed for sustainability, the 1141N delivers high performance from standard 802.3af Power over Ethernet while decreasing waste with multi-unit eco-packs and Energy Star certified power supplies. As part of the Cisco Unified Wireless Network, the 1141N provides the industry's lowest total cost of ownership and investment protection by integrating seamlessly with the existing network.
The Cisco Unified Wireless Network with M-Drive technology removes the mystery associated with design, implementation, and ongoing optimization of enterprise wireless networks. With Cisco M-Drive technology, IT has the tools needed to build and operate a high performance wireless network without the need for extensive RF engineering skills. Cisco M-Drive technology is a systemwide approach that manages the corporate RF spectrum, improves wireless coverage, and increases system capacity and performance.
Single Band 802.11a/g/n Fixed Unified AP Internal Antenna FCC Configuration - AIR-LAP1141N-A-K9
|
Performance
|
|
|
Data Transfer Rate
|
300 Mbps
|
|
Protocols
|
|
|
Networking Protocol
|
IEEE 802.11g
|
|
Networking Protocol
|
IEEE 802.11b
|
|
Actual Weight
|
2.30 lb(s)
|
|
Compatibility Notes
|
Features
Performance with Investment Protection
Six times faster than 802.11a / g networks
Backward-compatible with 802.11a / b / g clients
M-Drive technology optimizes RF
Easy Installation and Power Efficient
802.11n performance with existing PoE switches
Sleek design blends into a variety of indoor environments
Secure Interoperability
802.11n draft 2.0 compliant
Intel Connect with Centrino Certified
Simplified Network Management
Controller-based or standalone deployment options
CleanAir1 technology reduces troubleshooting and performance impacts
Secure Connections
Supports rogue access point detection and denial of service attacks
Management frame protection detects malicious users and alerts network administrators
Greater Network Capacity
Dynamic frequency selection 2 (DFS-2) compliant
Easy-to-Install, Multipurpose Mounting Bracket
Designed for easy replacement of existing access points
UL 2043 plenum rated for above ceiling installation options or suspended from drop ceilings
Locks for theft protection
|
|
Contents
|
Unit, LWAPP software, mounting hardware, documentation
|
|
Memory Notes
|
System Memory
128 MB DRAM
32 MB flash
|
|
Physical Dimensions
|
1.8"h x 8.7"w x 8.7"d
|
|
Power Notes
|
Input Power Requirements, AP1140: 44 to 57 VDC
Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
Powering Options
802.3af Ethernet Switch
Cisco AP1140 Power Injectors (AIR-PWRINJ4=)
Cisco AP1140 Local Power Supply (AIR-PWR-A=)
Power Draw, AP1140: 12.95 W
Note: When deployed using PoE, the power drawn from the power sourcing equipment will be higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W.
|
|
Returns Policy
|
Due to manufacturer restrictions, all sales on this item are final.
|
|
Warranty - Labor
|
90 Days
|
|
Warranty - Parts
|
90 Days
|
Single Band 802.11a/g/n Fixed Unified AP Internal Antenna FCC Configuration - AIR-LAP1141N-A-K9
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=9317573#BVSecondaryCustomerRatings