Print page E-mail page

Cisco Aironet 14-dBi Vertically Polarized Sector Antenna (AIR-ANT2414S-R)

More From: Cisco

Item #: 5254368

Mfr. Part#: AIR-ANT2414S-R

Availability: In Stock

Est. Ship: Usually Ships Monday

Cisco Aironet bridge antennas allow for extraordinary transmission distances between two or more buildings. Available in directional configurations for point-to-point transmission and omnidirectional configuration for point-to-multipoint implementations, Cisco has a bridge antenna for every application.

Overview

Specs

Reviews

Cisco Aironet 14-dBi Vertically Polarized Sector Antenna (AIR-ANT2414S-R)

Cisco AIR-ANT2414S-R is a 14-dBi vertically polarized sector antenna (mast mount) providing -15 dBc and 0 to 30 degree declination lower side lobe null fill. For outdoor long range point-to-multipoint applications, this antenna supports 14 dBi gain and approximate ranges of 6.5 miles at 2 Mbps and 2.0 miles at 11 Mbps. Its beam width is 90 degrees High by 8.5 degrees Vertical. A 5-foot cable is attached.

Actual Weight	6.50 lb(s)
Contents	Antenna, 5 ft. cable, documentation
Physical Dimensions	36"l x 6"w
Returns Policy	Due to manufacturer restrictions, all sales on this item are final.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Cisco Aironet 14-dBi Vertically Polarized Sector Antenna (AIR-ANT2414S-R)

Cisco Aironet 12 dBi High Gain Omnidirectional Antenna - AIR-ANT24120

This 12-dBi high gain omnidirectional antenna operates in the 2400-2500 MHz band and is designed for use outdoors. The antenna is compatible with Cisco Aironet radio products utilizing a reverse-polarity threaded naval connector (RP-TNC) connector.This antenna is designed for use with Cisco Aironet access points and bridges but can be used with any 2.4-GHz Cisco Aironet radio device that uses...

Cisco Aironet 5.8GHz 9.5dBi Sector Antenna - AIR-ANT58G10SSA-N

The Aironet 5.8 GHz 9.5 dBi Sector Antenna is for use with the Cisco 1400 Series Wireless Bridge. This 9.5 dBi sector antenna with support for either vertical or horizontal polarization has an N-Type connector.

Cisco Aironet 802.11a 3.5dBi Indoor Omni-Directional Antenna, Gray - AIR-ANT5135DG-Reql

The Cisco Aironet AIR-ANT5135DG-R is an indoor omni-directional 5GHz antenna for access point and bridge equipment that enables a customized wireless solution for almost any installation.

Cisco 2.4-2.5Ghz 5dBi Sector Antenna - AIR-ANT2450S-R

This Cisco 2.4-2.5GHz Access Point antenna is a Wall Mount indoor, outdoor or midrange sector antenna which may be used as a midrange bridge antenna.

Cisco Aironet High Gain Omnidirectional Ceiling Mount Antenna - AIR-ANT1728

Cisco delivers superior Wireless Network connectivity with their Aironet Series of Wireless products.

Cisco Aironet Four-Element Dual-Band Omnidirectional Antenna - AIR-ANT2451V-Reql

This is a four-element dual-band antenna that operates in the 2.4- and 5GHz frequency ranges. The antenna is designed for use in an indoor environment.

Cisco Aironet Four-Element Dual-Band Omnidirectional Antenna - AIR-ANT2451V-R=

This is a four-element dual-band antenna that operates in the 2.4- and 5GHz frequency ranges. The antenna is designed for use in an indoor environment.

Netgear 14 dBi Patch Panel Directional Antenna (ANT24D18)

Extended the coverage for your existing 802.11b or 802.11g wireless local area network

Cisco Aironet 17dBi 802.11a Outdoor Sector Antenna for 1510AG, 1522AG, 1524 - AIR-ANT5117S-N

The Cisco Aironet 5GHz 17dBi Sector Antenna operates in the 5GHz frequency range and is designed for use in point-to-multipoint environments. The antenna is designed to be used outdoors and can be mounted on 1.5" to 3.5" diameter masts.

Cisco Antenna Cable, RP-TNC (F-F) for Aironet HG Omnidirectional Antenna, 50ft - AIR-CAB050LL-R

This high-quality, low-loss 50-ohm cable is for use with the Cisco Aironet 12 dBi High Gain Omnidirectional Antenna. The antenna terminates with a special connector (reverse-TNC plug) after a short, 1-ft. cable. The mating connector to the antenna is an appropriate reverse-TNC jack connector.After the cable is attached to the antenna, make sure that the connections are sealed (if using...