Print page E-mail page

4-port Voice Interface Card FXS & DID

More From: Cisco

Item #: 10142184

Mfr. Part#: VIC3-4FXS/DID=

Availability: On Order

Est. Ship: Call for Availability

Overview

Specs

Reviews

4-port Voice Interface Card FXS + DID - VIC3-4FXS/DID=

This is a Cisco 4-port FXS and DID voice/fax interface card. The FXS port is used to connect directly to phones, fax machines and key systems. The card generates battery polarity reversal and caller ID, and it also provides an off-premises DID connection from the central office. It also serves incoming calls from the PSTN.

Compatibility Notes	Specifications Interface Type: FXS (on-premise connection only) and DID trunk Cisco IOS Software Release: 12.4(15)XZ or 12.4(20)T Compliance: FCC Class B device, CE Safety Conformance: UL1950 Address Signaling Formats: In-band DTMF; Out-of-band pulse (8-12 pps) Signaling Modes: FXS Loop-start, ground-start; DID Immediate, Delay-dial, WinkStart DID Loop Resistance: Up to 1800 ohms (including terminal equipment) FXS Loop Resistance: Up to 600 ohms (including phone or terminal equipment) On-Hook Voltage: -44V Off-Hook Loop Current: 25mA (max) Ringing Tone: Configurable for different country requirements Ringing Voltage: 45Vrms into 5REN at zero loop length (balanced) Ringing Frequencies: 20Hz, 25Hz, 30Hz, 50Hz REN Loading: 5 REN/port, 8 REN/VIC (max) and 2 REN/port with mixed mode FXS / DID ports Disconnect Supervision: Power denial (Calling Party Control, far-end disconnect) Caller ID: On-hook transmission of frequency-shift-keying (FSK) data Loop Length: <1500ft (450m) 24AWG Category 5 twisted pair cable
Contents	Unit, documentation
Ports/Connectors	Physical Connector: RJ-11 Number of Connectors / Ports: (4)
Returns Policy	Due to manufacturer restrictions, all sales on this item are final.
Warranty - Labor	90 Days
Warranty - Parts	90 Days

Related to Cisco 4-port Voice Interface Card FXS + DID - VIC3-4FXS/DID=

Cisco 2-port Voice Interface Card, E+M - VIC2-2E/M

This 2-port E&M voice/fax interface card is used to connect to PBX or key system as tie lines.Cisco IP Communications voice/fax network modules support either one or two Cisco voice interface cards (VICs) or Cisco voice/WAN interface cards (VWICs) and install into network module slots for the Cisco 2600XM Series, Cisco 2691, and Cisco 3600 and 3700 series voice gateway...

Cisco 2-port Voice Interface Card BRI for Network / Terminal Configuration - VIC2-2BRI-NT/TE

This 2-port BRI voice/fax interface card (configurable for either network or terminal side) is used to connect as network side or user side to a PBX or key system as off-premises connections (ISDN voice BRI). The card supports patent-pending flexible Layer 2 and Layer 3 configurations.Cisco IP Communications voice/fax network modules support either one or two Cisco voice interface cards...

Cisco 2-port Voice Interface Card FXO / Universal - VIC2-2FXO=

This 2-port FXO voice/fax interface card (universal card for all countries) also supports analog Centralized Automated Message Accounting (CAMA) on any port. The FXO port is used to connect to a PBX or key system, or to provide off-premises connections to PSTN or PTT. This card supports battery reversal detection and caller ID. Cisco VICs can be software configured to...

Cisco VIC-2FX Voice Interface Card - VIC2-2FXS=

Provide voice interface card support on your Cisco 1700 series router with the Cisco VIC-2FX.

Cisco 4-Port FXS and DID Voice/Fax Interface Card - VIC3-4FXS/DID

Cisco 4-Port Copper NIC for IPS 4260 - IPS-4GE-BP-INT

This is a spare 4-port copper interface card with built-in hardware bypass for the Cisco IPS 4260 and 4270.To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to essential information, and advanced hardware replacement. To learn more, call your account manager or 1-800-800-0014 today!

IBM Server Accessories 2/4 Port Ethernet Expansion Card for IBM BladeCenter - 44W4479

The IBM 2/4 Port Ethernet Expansion Card (CFFh) for IBM BladeCenter is the perfect example of IBM's goal to meet user requirements in the BladeCenter environment. In addition to the two onboard Ethernet ports, this card allows the client to add up to four (in IBM BladeCenter H chassis) or two (in BladeCenter S) extra 1 Gb ports thereby allowing...

IBM Server Accessories Broadcom 10Gb 4-port Ethernet Exp Card (CFFh) - 44W4465

Broadcom 10 Gb 4-Port Ethernet Expansion Cards (CFFh) for IBM BladeCenter shows IBM's commitment to meet customer needs through its BladeCenter offerings. It is the latest addition to the 10 GB BladeCenter portfolio enabling high-speed connections to drive bandwidth-intensive applications like virtualization. The Broadcom 10 Gb 4-Port Ethernet Expansion Card allows clients to add up to four High-Speed Switch Modules...

Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card - HWIC-4T1/E1

The Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card provides n x T1/E1 connectivity in a compact form factor and reduces deployment and management costs.As more data and voice services are enabled in branch offices, the demand for WAN bandwidth increases accordingly. Multilink Point-to-Point Protocol (PPP) and Multilink Frame Relay enable customers to scale their leased lines from single...

Cisco 4-port 10/100BaseT Fast Ethernet Switch WAN Interface Card (WIC-4ESW)

The Cisco 4-port 10/100BaseT Fast Ethernet Switch WAN Interface Card (WIC-4ESW) for Cisco 1700 Series modular access routers is an intelligent managed switch, offering small businesses and enterprise small branch office customers the option to integrate LAN switching and routing into one platform.