Power Inverter/Charger, 750 Watts Continuous, 230V 50Hz Output - APSX750
The Tripp Lite APSX750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. It supplies up to 750 watts of continuous 230VAC power to (2) AC outlets from any 12V battery or automotive DC source. The OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and the DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When an AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via a 3-stage, 20 amp charging system.
In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. The unit includes a set of high current DC input terminals for simple installation (you supply batteries and cabling and you must refer to the owner's manual for recommendations). It passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes.
The reliable large transformer design with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. The optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (APSRM4 available separately). This unit supports an unlimited amount of runtime with any number of user-supplied batteries connected. It is highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.
Power Inverter/Charger, 750 Watts Continuous, 230V 50Hz Output - APSX750
|
Power
|
|
|
Power Provided
|
750 watt(s)
|
|
Power Provided
|
230 V
|
|
Surge Suppression
|
Standard
|
|
Actual Weight
|
18.60 lb(s)
|
|
Compatibility Notes
|
LEDS ALARMS & SWITCHES
Front panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches: 3 position on/off/remote switch enables simple on/off power control plus "auto / remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto / remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
SURGE / NOISE SUPPRESSION
AC surge suppression: 840 joules AC surge suppression included
|
|
Contents
|
Unit, documentation
|
|
Physical Dimensions
|
7"h x 8.75"w x 9"d
|
|
Power Notes
|
Voltage compatibility: 12VDC / 230VAC
Frequency compatibility: 50Hz
OUTPUT
Output capacity: INVERTER MODE - 750 watts continuous, Double Boost rated to 1500 watts peak (up to 10 seconds); Overpower rating supports longer term overloads to 1125 watts for up to 15 seconds prior to inverter shutoff.
Output nominal voltage: AC OUTPUT: 230VAC nominal, DC CHARGER OUTPUT (DC): 12VDC nominal
Output voltage regulation: LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230VAC (+ / -5%).
Output frequency regulation: 50Hz (+ / - 0.3Hz)
INPUT
Maximum input: DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load
Recommended electrical service:
DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 100A minimum battery system fusing is recommended.
AC INPUT: 230VAC
BATTERY
DC system voltage: DC input operating range 10-15VDC.
Battery recharge rate: 3 stage, 20 amp battery charger with adjustable settings for wet / gel battery types
Expandable battery runtime: Runtime is expandable with any number of user supplied wet or gel type batteries
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
N/A
|
Power Inverter/Charger, 750 Watts Continuous, 230V 50Hz Output - APSX750
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=5861643#BVSecondaryCustomerRatings