Intl Inverter/Charger 2000VA 12VDC-230VAC RJ45 60A Hardwired - APSINT2012
The APSINT2012 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. It supplies up to 2000W of continuous 230VAC power from a 12V battery set or automotive DC source. When a hardwire input AC cable is in use, commercial power passes through to connected equipment and the battery set is recharged via a 3 stage, 60 amp selectable charging system. In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to the battery-derived AC output. The system includes a set of high current DC input terminals for simple installation (with user supplied batteries and cabling). The reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. It can support an unlimited amount of runtime with any number of user-supplied batteries connected. The APSINT2012 DC-to-AC inverter is highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet or gel battery types and selectable line to battery power transfer voltages.
Intl Inverter/Charger 2000VA 12VDC-230VAC RJ45 60A Hardwired - APSINT2012
|
Power
|
|
|
Surge Suppression
|
Not available
|
|
Power Provided
|
2000 watt(s)
|
|
Actual Weight
|
42.00 lb(s)
|
|
Compatibility Notes
|
Front panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported).
Switches: 3 position on/off/remote switch enables simple on/off power control plus "auto / remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSPVREMOTE accessory in inverter mode. In AC uninterruptible power mode, "auto / remote" setting enables automatic transfer from line power to battery power to maintain continuous AC power to connected loads
|
|
Contents
|
Coverter, documentation
|
|
Physical Dimensions
|
7"h x 8.5"w x 14"d
|
|
Ports/Connectors
|
Outlet quantity / type: hardwire AC output
Input connection type, DC input: set of 2 DC bolt-down terminals
Input connection type, AC input: hardwire via built-in junction box with cover plate
Input cord length, DC input: user supplied cabling, 4 AWG or larger recommended
Input cord length, AC input: user supplied hardwire input cabling
|
|
Power Notes
|
Voltage compatibility: 12VDC / 230VAC
Output capacity, continuous: 2000W
Output capacity, overpower (up to 1 hour): 3000W
Output capacity, double-boost (up to 10 seconds): 4000W
Output nominal voltage, AC output: 230VAC nominal
Output nominal voltage, DC charger output: 12VDC nominal
Output voltage regulation, line power: maintains 230V nominal sine wave output
Output voltage regulation, inverter power: maintains PWM sine wave output voltage of 230 VAC (+ / -5%)
Output frequency regulation: 50Hz, + / - 0.3Hz
Overload protection: Includes 10A input breaker dedicated to the charging system, 15A output breaker for AC output loads
Maximum input, DC input: Full continuous load - 192A at 12VDC
Maximum input, AC input: 38 amps at 230VAC with full inverter and charger load
Recommended electrical service, DC input: requires 12VDC input source capable of delivering 192A for the required duration (when used at full continuous capacity) Recommended electrical service for automotive applications: professional hardwire installation with 400A minimum battery system fusing is recommended
DC input operating range: 10-15VDC
Battery recharge rate: includes 60 amp DC charging system with selectable profiles for vented wet cell and sealed gel cell batteries. Optional use battery equalize charge function equalizes the charge level when used with multiple batteries (see manual for detailed charger information).
Expandable battery runtime: Runtime is expandable with any number of user supplied wet or gel type batteries
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
N/A
|
Intl Inverter/Charger 2000VA 12VDC-230VAC RJ45 60A Hardwired - APSINT2012
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=6535698#BVSecondaryCustomerRatings