10-Outlet Basic Power Strip

CPI's vertical power strips offer an expanded range of features and options. The power strip is designed to provide power along the full height of racks. Mounting brackets provide a 6.5" standoff from the rack channel which allows plug and service access for all rack-mounted equipment. Easy rack mounting to channel provides flexibility in vertical placement of brackets. Mounting screws...

Fellowes Metal Seven Outlet Power Strip is encased in a rugged steel housing to provide the maximum strength and durability. ABS endcaps prevent damage to office furniture. The Metal Seven Outlet Power Strip has a 12' power cord for extended reach and comes with a right angle plug that lies close to the wall when plugged into an outlet. Three-prong...

This rack-mountable, switched power strip is perfect for use with Mighty Mo racks. It provides power to your rack mounted equipment. The power strip is 49" long and features a 15 foot cable. You get (16) NEMA 5-15 outlets and a NEMA 5-15 plug.

Protect your network with convenient, easy-to-install power strips.

CPI's redesigned vertical power strips offer an expanded range of features and options. Designed to provide power along the full height of racks 4' high and taller. Mounting brackets provide a 6.5" standoff from the rack channel which allows plug and service access for all rack-mounted equipment. Easy rack mounting to channel provides flexibility in vertical placement of brackets. Mounting...

Protect your network with convenient, easy-to-install power strips.

This 24-outlet rackmount power strip provides a 0U solution for your rackmount equipment. It fits all 42U DuraRak equipment. The 10-foot power cord provides plenty of reach to power outlets, and the 24 evenly spaced outlets keep power cabling clean and efficiently routed.

Surge Protected Power Strip includes four or ten grounded outlets. Complete with on/off switch and a 20 cord. UL and C-UL listed. Constructed of steel and finished in black powder paint.

The Waber-by-Tripp Lite UL800CB-15 Power Strip offers a convenient method of power distribution in workbench, wallmount or floor mount applications. Includes 10 NEMA 5-15R output receptacles arranged with traditional wall socket spacing to accept large equipment plugs with minimal outlet blockage. It includes a 15 foot AC line cord and flat sheet metal flanges for installation in a wide variety...

This vertical power strip can be mounted in any Hubbel Premise Wiring cabinet or rack to distribute power to active equipment. The strip is 40" long and features a 10' cord. You get (10) outlets with surge suppression. The power strip is for use with 15A 125V AC 60Hz power.