2400W 48V DC to AC Inverter with Automatic Line-to-Battery 15-Amp Charger - APS2448UL
- Converts 48V DC to 120V AC power
- Supplies up to 2400W of power
- Can be used as a standalone inverter or as a UPS
Tripp Lite's APS2448 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as a standalone 48V inverter or an extended run UPS. It supplies up to 2400 watts of continuous 120V AC power from a 48V DC bus or battery set. When an optional hardwire input AC cable is energized, commercial power passes through to connected equipment and the battery set is recharged via a 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. It includes a set of high current DC input terminals for simple installation (user supplies DC source and cabling). The reliable, large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. It supports an unlimited amount of runtime with any number of user-supplied batteries. This inverter is highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet / gel battery types and selectable line to battery power transfer voltages.
2400W 48V DC to AC Inverter with Automatic Line-to-Battery 15-Amp Charger - APS2448UL
|
Power
|
|
|
Power Provided
|
2400 watt(s)
|
|
Power Provided
|
120 V
|
|
Surge Suppression
|
Not available
|
|
Actual Weight
|
38.00 lb(s)
|
|
Compatibility Notes
|
System overview: Reliable 48VDC to 120VAC power inverter system serves as an automotive inverter, a battery charger and an uninterruptible power supply. Extended runtime capable with any number of user supplied batteries. 2400 watts continuous / 4800 watts peak. Requires hardwire input & output connection.
Front panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches: 3 position on/off/remote switch enables simple on/off power control plus "auto / remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto / remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
|
|
Contents
|
Intverter, documentation
|
|
Physical Dimensions
|
7.3"h x 8.5"w x 16"d
|
|
Ports/Connectors
|
(2) DC input bolt-down terminals
(1) Hardwire AC input via built in junction box with cover plate
(1) Hardwire AC output
|
|
Power Notes
|
Voltage compatibility: 48VDC / 120VAC
Frequency compatibility: 60 Hz
Output:
Output watt capacity (watts):
Continuous - 2400 watts
Overpower (up to 1 hour) - 3600 watts
Double-Boost wattage (up to 10 seconds) - 4800 watts
Output nominal voltage:
AC Output: 120VAC nominal,
DC Charger Output: 48VDC nominal
Output voltage regulation:
Line Power (AC): Maintains 120V nominal sine wave output
Inverter Power (AC): Maintains PWM sine wave output voltage of 120 VAC (+ / -5%)
Output frequency regulation: 60 Hz (+ / - 0.3 Hz)
Outlet quantity / type: Hardwire AC output
Overload protection: Includes 20A output breaker for AC output loads
Input:
Maximum input amps / watts:
DC Input: Full continuous load - 56A at 48VDC
AC Input: 36 amps at 120VAC with full inverter and charger load recommended.
Recommended electrical service:
DC Input: Requires 48VDC input source capable of delivering 56A for the required duration (when used at full continuous capacity). For automotive applications, professional hardwire installation with 100A minimum battery system fusing is recommended.
Battery:
DC system voltage: DC input operating range 40-60VDC.
Battery recharge rate: Includes 15 amp DC charging system with selectable profiles for vented wet cell and sealed gel cell batteries. Optional use battery equalize charge function equalizes the charge level when used with multiple batteries (see manual for detailed charger information).
Expandable battery runtime: Runtime is expandable with any number of user supplied wet or gel type batteries.
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
2400W 48V DC to AC Inverter with Automatic Line-to-Battery 15-Amp Charger - APS2448UL
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=5310745#BVSecondaryCustomerRatings