VTrak VTE610fD E-Class 4Gb Fibre Channel SATA SAS RAID Dual Controller Storage System

This is the VTrak VTE610fS. It is a 3U/16-Bay single controller SAS/SATA storage array. It holds up to sixteen 3.5" x 1" SAS or SATA 3Gb/s hard drives. Each module has four 3GB SAS x4 host interface ports per controller. Also, attach up to four SAS JBODS to deliver 80 drive bays of direct attached storage. The enterprise-class, cable-less system...

This 20-port QLogic Fibre Channel (FC) switch module helps to deliver high-performance SAN solutions using 4Gb Fibre Channel Technology. For customers deploying standards-based solutions, this switch supports interoperability in open mode leveraging FC-SW-2 -compliant SANs. Easily integrated into core or edge SAN configurations using QLogic's SANsurfer Management Suite. This tool eases installation, configuration and management of your SAN infrastructure-all from...

A Dual Channel 4Gb Fibre Channel PCI Express card is required to connect Xserve RAID to a Mac Pro or Xserve (Intel-based) with a PCI Express bus. It comes with two 2.9m 4Gb Active Copper Fibre Channel SFP to SFP interconnect cables. The Fibre Channel PCI Express card is installed in your computer and the cables are used to connect...

A Quad Channel 4Gb Fibre Channel PCI Express card is recommended for customers in need of additional port requirements for direct connection to Xserve RAID or for additional bandwidth and multipathing. The Quad Channel 4Gb Fibre Channel PCI Express Host Bus Adapter comes with four 2.9m 4Gb Active Copper Fibre Channel SFP to SFP interconnect cables. The Fibre Channel PCI...

This SFP transceiver provides 4Gb fibre channel connectivity.

This is the VTrak VTE610sS. It is a 3U/16-Bay single controller SAS/SATA storage array. It holds up to sixteen 3.5" x 1" SAS or SATA 3Gb/s hard drives. Each module has four 3GB SAS x4 host interface ports per controller. Also, attach up to four SAS JBODS to deliver 80 drive bays of direct attached storage. The enterprise-class, cable-less system...

This is the VTrak VTE610sD. It is a 3U/16-Bay dual controller SAS/SATA storage array. It holds up to sixteen 3.5" x 1" SAS or SATA 3Gb/s hard drives. Each module has four 3GB SAS x4 host interface ports per controller. Also, attach up to four SAS JBODS to deliver 80 drive bays of direct attached storage. The enterprise-class, cable-less system...

VTrak E-Class storage systems support SAS or SATA disk drives and active failover RAID 6 dual controllers. These 2U 12 drive-bay systems offer SAN or DAS connectivity. As storage requirements become more demanding, the need for increased flexibility and secure data access is paramount. The open architecture of the VTrak E-Class allows for the use of either SAS (Serial Attached...

The Brocade SilkWorm 207E is a 4 Gb, 8-port Fibre Channel (FC) switch with E-port capabilities. It provides affordable connectivity for new or existing SANs being upgraded to 4 Gb technology and combines auto-sensing 1, 2, and 4 Gb/s FC throughput for investment protection. An EZSwitchSetup wizard provides easy deployment. Enjoy the advantages of low-cost device connectivity and highly accessible...

The Brocade SilkWorm 207E is a 4 Gb, 8-port Fibre Channel (FC) switch with E-port capabilities. It provides affordable connectivity for new or existing SANs being upgraded to 4 Gb technology and combines auto-sensing 1, 2, and 4 Gb/s FC throughput for investment protection. An EZSwitchSetup wizard provides easy deployment. Enjoy the advantages of low-cost device connectivity and highly accessible...